Instruction/ maintenance manual of the product TX-51P400X Panasonic
Go to page of 44
TQBC0517 This is a combined Operating Instruction manual for all the above series of models. Please read these instructions before operating your set and retain them for future reference. Projection T elevision Operating Instructions TC-43P400H TX-43P4 00H TX-43P400X TC-51P400H TX-51P400H TX-51P400X Model No.
Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Pr ojection television set. T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence.
3 T able of contents T able of contents W arnings and Cautions ................................................................. 4 Before Operating This Set ............................................................. 6 How to Use This Manual .......
4 W arnings and Cautions W arnings Unplug the power cord in the event of any malfunction (screen goes blank, no sound, odd sounds, smoke or unusual odors coming from the unit). Unplug the power cord if foreign matter or water falls into the unit, or if the unit is dropped or the cabinet is damaged.
5 W arnings and Cautions Cautions DO NOT place in humid or dusty location, or areas exposed to smoke or steam. DO NOT place in direct sunlight and other sources of direct heat. DO NOT place in an unstable location. DO NOT stand, or place heavy objects on the unit.
6 Before Operating This Set How to Use This Manual Check the Model Number of your TV set; the Model Number is shown on the rear cover name plate on the set. Use the table on the opposite page to confirm which features your particular Model is equipped with.
7 Before Operating This Set Quick Reference Guide for your TV Set Please check the model number of your set. This Manual applies to several Models and there are slight differences among them. Please check the table below to see what your TV is equipped with before you begin using these Operating Instructions.
8 Before Operating This Set Connecting the Aerial Cable to the RF In T erminal UHF Aerial RF In Terminal Coaxial Aerial Plug VHF Aerial Mixer 75 Ohm Coaxial Cable RF in Terminal Coaxial aerial plug 75.
9 Notes: • Main plug types vary between countries. The main plug shown at left may therefore not be the type fitted to your set. • The On/Of f switch on this model does not full disconnect the TV from the mains supply . 3 Replace the cover . Do not use rechargeable (Ni-Cd) batteries.
10 S VIDEO TV/A V STR F Sub. Main VIDEO L/MONO AUDIO R AV 3 IN S VIDEO VIDEO MONO MONO R L AUDIO VIDEO MONO R L AUDIO P B P R Y DVD [ Y- P B- P R ] P B P R Y DVD [ Y- P B- P R ] AV 1 IN AV 2 IN AV 4 IN MONITOR OUT Location of Controls Controls and T erminals on the TV Item No.
11 (VHS VCR) VIDEO AUDIO Audio OUT Video OUT R L MONO AV 1 IN S VIDEO VIDEO MONO MONO R L AUDIO VIDEO MONO R L AUDIO P B P R Y DVD [ Y- P B- P R ] P B P R Y DVD [ Y- P B- P R ] AV 1 IN AV 2 IN AV 4 IN.
12 How to connect the DVD Input T erminals How to connect the A V Monitor Output T erminals to other equipment The “ Monitor Out ” T erminals output the same signals as main picture on the TV screen and sound from the speaker at that time, e.g. TV programmes or signals from A V1, A V2, A V3 or A V4 input.
13 Connections Connecting Headphones Connect headphones as follows. Y ou can listen to sound from each of the headphones plugs as shown below. Main Headphones plug: When a Main Headphones plug is inserted into the Headphones socket, all speakers will be automatically disconnected; only the Main Headphones will function.
14 TV/A V STR F P. A I STILL CH SEARCH D.PNR 100Hz/ PROGRE Volume Adjustment TC-43P400H TC-51P400H Picture Menu (see page 16, 30) Sound Menu (see page 16, 32) Set up Menu (see page 17, 29) Stereo/Bili.
15 General Operation N ? LD/DVD REC - VCR STR HELP DISC SIDE A B TV/A V 1 2 3 45 6 78 9 0 F. P. INDEX HOLD STILL CH SEARCH PICTURE SOUND SET UP TV/TEXT SURROUND 100Hz/ PROGRE MUL TI PIP Volume Adjustm.
16 N ? LD/D VD REC - VCR STR HELP DISC SIDE A B TV/A V 1 2 3 45 6 78 9 0 F. P. INDEX HOLD STILL CH SEARCH PICTURE SOUND SET UP TV/TEXT SURROUND 100Hz/ PROGRE MUL TI PIP On-Screen menu Display from Remote Control ST AND ARD MENU CONTRAST BRIGHTNESS COLOUR SHARPNESS C.
17 TELETEXT OFF TIMER FLICKER REDUC. STROBE CH COLOUR SET TEXT SELECT ENGLISH VCR / GAME OFF OFF D YNAMIC F ASTEXT SETUP MENU TUNING MENU PICTURE SHIFT CHILD LOCK CONVERGENCE LANGU A GE OFF OFF A CCES.
18 Convergence Adjustment mode Prior to adjustment, tune the broadcast signal to the video input signal and operate the set for more than 60 minutes. If the location or direction of the set is changed or moved, the display may be out of alignment.
19 Convergence Adjustment Convergence1 Adjustment for RED, BLUE and GREEN Press to align the horizontal red line with the horizontal blue line. (Becomes a white line) GREEN N - RED ADJUST CONVERGENCE .
20 Convergence Adjustment Convergence2 Adjustment for RED and BLUE This function adjust the convergence of the side part of the screen. Press to select the CONVERGENCE2.
21 1 Press to display the SETUP MENU. Press to select the TUNING MENU. Press to display the TUNING MENU. SET UP TELETEXT OFF TIMER FLICKER REDUC. STROBE CH COLOUR SET TEXT SELECT ENGLISH VCR / GAME OF.
22 Select the most easily viewed channel selection method. 14ch 16ch 18ch 20ch 12ch 10ch 8ch 6ch 4ch 2ch Example Programme Number Channel Display Received Channel 1 2 3 4 5 6 7 8 9 10 2 4 6 8 10 12 14.
23 Channel Allocation • CA TV (USA CA TV) channel numbers as recommended by the joint EIA/NCT A Engineering committee and published as EIA INTERIM ST ANDARD No.6-CABLE TELEVISION CHANNEL IDENTIFICA TION PLAN-MA Y 1983. • The receiving channels are as follows; SYS SELECT CH DISPLAY CHINA HK/UK ASIA/M.
24 T uning Channels The best tuning position is automatically memorized. Automatic T une This TV uses automatic tuning to determine whether or not the TV can receive a broadcast signal which is being sent, and automatically prepares so that the channel selection can respond to both the position select and direct select modes.
25 Manual T une MANUAL TUNE Press to select the MANUAL TUNE. Press to access to the MANUAL TUNE. Search Start. 1 CH 12 29 MANU AL TUNE PROGRAMME - /+ SEARCH - /+ RETURN TV / AV - EXIT ‘ STR ’ BUTT ON-ST ORE Press to select the desired Programme Number .
26 Fine T uning Under normal reception conditions this function is not required or necessary . However , in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality . 1 SYS SELECT CH SELECT AUTO TUNE MANUAL TUNE FINE TUNE SKIP SOUND SYS COLOUR SYS AUTO OFF POSITION TUNING MENU 5.
27 T uning Channels Programme Number Skip It is possible to skip Programme Number on which no TV stations are tuned appearing on the screen. The function is only effective when selecting Programme Numbers by pressing the Programme Number Up or Down button either on the TV set or on the Remote control.
28 Sound System Selection (Different region use differing systems) This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme Number , and is not applicable in A V mode . Press to select the “ SOUND SYS ” .
29 Setup Adjustment 1 Press to display the SETUP MENU. 2 Press to select the desired function. Press to adjust or change the function. 3 Press to go back to watching TV .
30 Picture Adjustment 1 Press to display the Picture Menu. 2 Press to select the desired function. Press to adjust or change the function. 3 Press to go back to watching TV . PICTURE TV/A V Notes: • When set to Multi PIP mode, the main and sub pictures are both adjusted simultaneously .
31 Picture Adjustment Set the overall colour tone of the picture. C. TEMP (Colour T emperature) P-NR (Picture Noise Reduction) AI ( Artificial intelligence) SCAN MODE Press to switch between modes ST AND ARD MENU CONTRAST BRIGHTNESS COLOUR SHARPNESS C.
32 Sound Adjustment 1 Press to display the Sound Menu. 2 Press to select the desired function. Press to adjust or change the function. 3 Press to go back to watching TV . SOUND TV/A V Note: Some features are only available with the Surround feature switched off.
33 Sound Adjustment SURROUND MENU Press to select the SURROUND function. MENU VOLUME BASS TREBLE BALANCE SURROUND SUB HEADPHONE HEADPHONE VOL. ON DYNAMIC SOUND By pressing the Normal “ N ” Button on the Remote Control while the Sound menu is displayed, the selected menu will be changed to the Normal Mode.
34 Multi Screen 1 2 3 4 5 6 7 8 9 0 F. P. INDEX HOLD STILL CH SEARCH TV/A V PICTURE SOUND SET UP TV/TEXT 100Hz/ PROGRE SURROUND MUL TI PIP Multi PIP MUL TI PIP Press to view two pictures (sub picture in main picture) at the same tme.
35 Multi Screen ( ) Note: The remote control affects the teletext page; so select watching the current programme before making any changes to the programme. Press to freeze the picture, press again to return to watching the current programme. Press to select watching the current programme, the teletext or the picture and text feature.
36 Four differently coloured subjects are situated at the bottom of the display . T o access more information , press the appropriately coloured button.
37 TELE TEXT Page Selection (T wo ways) Press to increase or decrease the page number by one. 1 2 3 4 5 6 7 8 9 0 STILL CH SEARCH 100Hz/ PROGRE SURROUND MUL TI PIP ASPECT Enter the page number directly using 0-9 on the remote control. Press to display special functions.
38 Press to return to normal TV operation. Sub Coded Page Access When T eletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require. It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found.
39 Advanced Remoto Control Operation Stereo Bilingual Sound Selection Type of broadcast Mode Indicator Type of broadcast Mode Indicator Regular broadcast (Standard Audio) NICAM STEREO STEREO Mode Indicator NICAM .......used in New Zealand, Malaysia,Thailand, Indonesia etc.
40 Manufacturer setting Advanced Remoto Control Operation Remote Control Operation is possible for the VCR ’ s, LD ’ s and DVD ’ s of the various manufacturers.
41 Before you call for service, determine the symptoms and make a few simple checks as shown below . T roubleshooting Snowy Picture Multiple Image Interference Normal Picture No Picture No Colour Scra.
42 Cleaning T o ensure continued excellent performance by this product, periodic cleaning is recommended. The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. DO NOT bring into contact with insecticide or other volatile substances.
43 Specifications Power Consumption TX-43P400X / TX-51P400X TC-51P400H, TX-51P400H/X TC-43P400H, TX-43P400H/X TC-43P400H / TX-43P400H TC-51P400H / TX-51P400H Power Source AC 220-240 V, 50/60 Hz AC 110-240 V, 50/60 Hz 238 W Stand-by condition 3.0 W 228 W Stand-by condition 3.
Printed in Japan MBS0802O0 Matsushita Electric Industrial Co., Ltd. Web Site : http://www .panasonic.co.jp/global/ Customer ’ s Record The model number and serial number of this product can be found on its cabinet.
An important point after buying a device Panasonic TX-51P400X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TX-51P400X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TX-51P400X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TX-51P400X you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TX-51P400X will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TX-51P400X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TX-51P400X.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TX-51P400X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TX-51P400X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
