Instruction/ maintenance manual of the product TU-IRD20 Panasonic
Go to page of 68
S A T E L L I T E R E C E I V E R OPERA TING INSTRUCTIONS Copyright 1996 by Matsushita Electric Corporation of America. All rights reserved. Unauthorized copying and distribution is a violation of law . Printed in U.S.A. TQD2AA19009 Contents subject to change without notice or obligation.
SAFETY INFORMA TION Do not stack electronic components or other objects on top of the DSS Receiver . The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.
IMPOR T ANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your product, safety is a major factor in the design of every product.
iii 16 Lightning— For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power line surges.
T ABLE OF CONTENTS 1 TABLE OF CONTENTS Before Y ou Begin ........................................................... 3 What is the DSS ® System? ............................................................. 3 Ordering DSS ® Programming .............
TABLE OF CONTENTS 2 Lists & Limits ............................................................... 17 Controlling The System ................................................................ 17 Setting the Ratings Limit ............................
BEFORE YOU BEGIN 3 When you order programming, you need to know your Access Card number . T o get the number , select Options from the Main menu, and then select System T est. W ait for the system to run all of it’ s tests. The Access Card number is displayed at the end of the system test.
BEFORE YOU BEGIN 4 Unpacking the Box The following items come with your DSS ® receiver: • Receiver (access card inserted) • S-Video Cable • Remote Control • VCR Controller • Coaxial (RF) Ca.
BEFORE YOU BEGIN 5 Using This Manual There are a couple of conventions used in this manual that might help you read it. • W ords that appear in ALL CAPS indicate the name of a but ton.
BEFORE YOU BEGIN 6 Exiting A Screen Pressing the EXIT button on the remote takes you out of the menu system and back to the program you were watching. The On-Screen Navigation Method Point and Select is the method you use for navigating through the menu system and program guides.
7 PROGRAM GUIDES What is a Program Guide? A program guide is an on-screen programming schedule. There are several types of guides, each presenting the schedule in a different format.
8 PROGRAM GUIDES Scrolling Page By Page If you want to scroll up or down through the Program Guide more quic kly , press the Channel Up/Down buttons on the remote control.
9 PROGRAM GUIDES T ypes of Program Guides There are five types of program guides: the Grid Guide, the Info Guide, the T opic Guide, the Channel Guide, and the At tractions Guide. The Grid Guide Shows the schedule in a time-and-channel format, similar to a TV sc hedule listed in a newspaper .
10 PROGRAM GUIDES The T opic Guide Lets you sort the programming schedule to show certain topics, such as “movies” or “sports.” The T opic guide. The Channel Guide Displays the programming schedule for the selected channel. The Channel guide. The Attractions Guide Displays coming attractions and special events information.
11 PROGRAM GUIDES Sorting the Grid and Info Guides There are six on-screen choices—called “buttons”— at the bottom of the Grid Guide and the Info Guide: down ar row, Mo vies, Sports, Other , All, and S or t. The Sorting buttons are at the bottom of the screen.
12 PROGRAM GUIDES Allows you choose from a list of sorting topics. Once you have selected a sorting topic from the list, your guide will be simplified to show only that type of program. After selecting a topic, a Themes button may appear in the place of the Other button.
13 THE MENU SYSTEM What is a Menu? The DSS ® menu is a list of choices, just like a menu in a restaurant. And, just as a restaurant menu is divided into sections such as appetizers, entrees, and desserts, the on- screen menus are also separated into sections to help you find the information you need.
14 THE MENU SYSTEM Using the Menu System T o bring up the Main Menu, press MENU/SELECT on the remote. The Living Room Main Menu. T o use the menu system, you need to know the P oint and Select rule. Use the arrows on the remote to point to an item on the screen, and then press MENU/SELECT to select it.
15 THE MENU SYSTEM The Help balloons show all of the menu choices in the Living Room Main Menu. 3. Press MENU/SELECT ag ain. The help balloons disappear . The rest of the Help buttons in the menu system bring up helpful information explaining one aspect of that menu.
16 THE MENU SYSTEM Menu Descriptions This section briefly describes each of the available Main menu options. Detailed information about each menu is included in the sections of the manual which describe each menu. Program Guide Shows the on-screen programming schedules.
PROFILES 17 Controlling The System The Profiles feature lets four members of your household customize their DSS ® viewing by setting up channel lists and ratings limits which can be password protected.
PROFILES 18 Creating and Editing a Profile 1. Select Profiles from the Main Menu to get to the system control screen. The System Control screen. 2. Point to Edit Users from the system control screen and press MENU/•SELECT . Select a User Name to edit.
PROFILES 19 Editing a User’ s Name 1. Point to Edit Name and press MENU/SELECT . Use the arrows to edit a User’ s name. 2. Use the arrow keys to enter a new User name. Press MENU/ SELECT when the name has been entered. Editing the Channel List The first time that you enter this menu, all of the channels are selected (c hec k marked).
PROFILES 20 Setting the Rating Limit The Rating Limit menu enables you to set a maximum viewing limit for rated movies (based on the MP AA ratings system), as long as the program provider has transmitted the proper code.
PROFILES 21 Unlocking a User’ s Profile If you forget your user password, you might need to unlock the user in order to set a new one. Go the Edit User screen, point to Unlock User and press the MENU/ SELECT button; then you can enter a new password.
PROFILES 22 2 . Use the ar rows or the digit keys to enter a four -digit system password. 3. Enter the password a second time to confirm it. After the system has been locked, you must enter the correc.
MORE FEA TURES 23 Pay-Per -V iew Programs A pay -per -view program (PPV) is aprogram that you purc hase— like a movie ticket—on an event-by-event basis. For instance, you might be able to preview a movie, and then after previewing it, you can purchase the movie.
MORE FEA TURES 24 Using the Program Guide for PPV Programs If you highlight a PPV program in the Program Guide and then press RECALL on the remote control, you see a program details screen similar to the following: Use the Program Guide to get to the PPV Program Details screen.
MORE FEA TURES 25 Using the Purchases Menu The Purchases menu allows you to review upcoming and past purchases. The Purchases menu shows you upcoming or past purchases. The list of purchases may be longer than one screen; use the down arrow keys to see more items.
MORE FEA TURES 26 T imer Feature The T imer feature allows you to preset your system to automatically tune to a particular channel at a predetermined time, and even to record that channel. T o use the T imer feature, select T imers from the main menu to bring up the T imers screen.
MORE FEA TURES 27 For V CRs that do not label the remote sensor , you need to use the VCR’ s remote to locate the sensor before af fixing the V CR controller . 1. Hold the remote control so that it is touching the front of the VCR. 2. Slowly move the remote over the front of the VCR while pressing the remote power button on and off.
MORE FEA TURES 28 VCR Codes Aiwa .................................................... 015 Akai ............. 003, 017, 022, 023, 063, 066 Audio Dynamics ......................... 014, 016 Broksonic ............................................ 010 Candle .
MORE FEA TURES 29 One-Button Recording Press the REC (record) button on the remote while you have a program selected in the guide to set up a timer program.
MORE FEA TURES 30 The Mailbox The mailbox shows you messages that are sent—or “mailed”— from your program providers. For example, you may receive a message calling your attention to a new service. How to T ell When Y ou Have Mail There are two ways to tell if you have mail, depending on whether the satellite receiver is turned on or off.
MORE FEA TURES 31 Alternate Audio Display Screen When you select Alternate Audio from the Preferences menu, the Alternate Audio display screen comes up. P oint to an audio language, and press MENU/SELECT . A c hec k mark next to a language option means you have selected that language.
MORE FEA TURES 32 Using On-Line Help On-line Help is available for all of the menus and display screens. The System provides Auto Help, Help buttons, and Menu Help. Auto Help Most menus contain a short description of that menu. Help Buttons Help but tons appear in many display screens.
CONNECTIONS 33 Things to Know Before Connecting Components Protect Y our Components from Power Surges • Connect all components before plugging any power cords into the wall outlet. • Always turn of f the satellite receiver , TV and other components before you connect or disconnect any cables.
CONNECTIONS 34 Connecting Y our Satellite Receiver to Y our TV If your satellite system has not been professionally installed, or if you move your system or add a component, refer to these pages to help you connect your system.
CONNECTIONS 35 Choosing a Connection The following pages show four examples of hookups commonly used to connect the satellite receiver with a TV and other components. Refer to your TV and V CR Owner ’ s Manuals for more information on hooking up your specific components.
CONNECTIONS 36 Connection A Best Picture and Sound Quality T o use this connection you must have: • TV with separate RF , audio/video, and S-V ideo inputs (jacks) • VCR with RF and audio/video inputs • Coaxial, audio/video, and S-V ideo cables T o connect TV , VCR and antenna or cable box.
CONNECTIONS 37 Connection B V ery Good Picture and Sound Quality T o use this connection you must have: • TV with separate RF and audio/video inputs (jacks) • VCR with RF and audio/video inputs • Coaxial and audio/video cables T o connect TV , VCR and antenna or cable box.
CONNECTIONS 38 Connection C Good Picture and Sound Quality T o use this connection you must have: • TV with RF input (jack) • VCR with RF and audio/video inputs • Coaxial and audio/video cables T o connect TV , VCR, and antenna or cable box. 1. Connect coaxial cables and audio/video cables as shown.
CONNECTIONS 39 Connection D Good Picture and Sound Quality) T o use this connection you must have: • TV with RF input • Coaxial cables T o connect TV and antenna or cable box: 1.
CONNECTIONS 40 Interactive Setup If you self-installed your satellite dish, you may have already used the interactive setup to find the dish pointing coordinates, acquire and fine-tune the signal, and run a system test. If you need to run the interactive setup again, go to the Assistance menu and select Setup .
REFERENCE 41 DSS ® System Overview Although the DSS ® system is simple to use, there are a number of par ts in the system. Don’t be overwhelmed. This section explains how these different parts work together to bring a picture to your screen.
REFERENCE 42 Uplink Center Authorization Center Satellite Satellite Dish Antenna Parts of the DSS ® System One way to understand the DSS ® system is to look at the different parts of the system—from the studio down to the satellite receiver and remote control in your home.
REFERENCE 43 Home V iew These parts are inside of or attached to your house. Satellite Dish Pic ks up the satellite ’ s coded program information and relays it to your satellite receiver . (Y our satellite dish may be installed in different locations on or around your house.
REFERENCE 44 Controls and Buttons This part of the Reference sections discusses the controls and buttons located on the receiver and the remote control. Slide open the door to get to the Access Card. Front Panel Controls PO WER T urns the satellite receiver ’ s power on or put the unit into standby mode.
REFERENCE 45 Back Panel IN FROM ANT Use to connect an off-air antenna or cable TV signal to the DSS ® system. OUT T O TV Use to connect the satellite recei ver to your TV . However , if your TV has audio/video jacks, you should use those jacks to get better picture and sound quality .
REFERENCE 46 Remote Control Buttons 1 DIGIT KEYS (0 - 9) Use the digit keys to tune directly to a channel. If you are in the menu system, use the digit keys to enter numbers for the time, date, channel, and passwords. 2 TV/VIDEO Press to select TV or Video input.
REFERENCE 47 11 TV/DSS Switches the video input between TV and DSS ® mode. 12 VCR Control Buttons Use when controlling an auxiliary device, suc h as a VCR or laserdisc player . 13 AL T A UD (Alternate A udio) Use to step through the available languages or audio types for a program.
REFERENCE 48 Programming the Remote Control Using Access Codes The Mode Selection But tons control the operation of a TV , Cable box (CBL), VCR, Receiver (RCVR), Laserdisc player (LD), and auxiliary devices (AUX) suc h as a CD player , a Casset te Player or , a D VD player .
REFERENCE 49 1 2 3 4 5 6 7 8 9 0 R-TUNE TV/VIDEO POWER MUTE V C R 1 V C R 2 A U X L D R C V R C B L T V D S S CH CH VOL VOL MENU SELECT GUIDE EXIT When the Code is Not Known Procedure for setting up remote using the numerical buttons: • Confirm the device is plugged in and operating properly .
REFERENCE 50 T elevision Infrared Codes Index The Universal Infrared Remote Control is capable of operating many brands of televisions. Refer to the preceding pages for programming procedures. NOTE: The Universal Remote Control memory is limited. Some models of televisions may not operate.
REFERENCE 51 VCR Infrared Codes Index The Universal Infrared Remote Control is capable of operating many brands of VCRs. Refer to the preceding pages for programming procedures. NOTE: The Universal Remote Control memory is limited. Some models of VCRs may not operate.
REFERENCE 52 Cassette Players, CD Players, DVD players Receivers, and Amplifiers Infrared Codes Index The Universal Infrared Remote Control is capable of operating many brands of Cassette Players, CD Players, DVD players, Receivers, or Amplifiers. Refer to the preceding pages for programming procedures.
REFERENCE 53 Cable Converter Box Infrared Codes Index The Universal Infrared Remote Control is capable of operating many brands of Cable Converter Boxes. Refer to the preceding pages for programming procedures. NOTE: The Universal Remote Control memory is limited.
REFERENCE 54 Glossary The following is a list of terms used in this manual. There is also a glossary contained within the Assistance menu of your DSS ® system. Access Card Identifies you to the DSS ® service providers and is required for your DSS ® system to work.
REFERENCE 55 Past Purchases Detailed list of the programs that you have already purchased and viewed. Point and Select The method of using the remote control (or front panel) buttons to navigate to and make choices among the different parts of the on-screen displays.
REFERENCE 56 T roubleshooting The DSS ® S ystem T est allows you to run a basic diagnostics c hec k on your DSS ® system. If you are experiencing any trouble with your system, run the system test. Make sure that • All connections—jacks, cables, etc.
WARRANTY INFORMA TION 57 PANASONIC Digital Satellite Systems Limited Warranty Matsushita Consumer Electronics Company (refer red to as “The W arrantor”) will repair this product with new or refurb.
WARRANTY INFORMA TION 58 PANASONIC Digital Satellite Systems Service Directory Operation Assistance • Diagnostic Assistance • W arranty Service Call Panasonic on our toll-free telephone number when you need assistance with installation, hook-up, operational or service information.
WARRANTY INFORMA TION 59 P ANASONIC Digital Satellite Systems Replacement Program Matsushita Consumer Electronics Company (referred to as “Panasonic”) offers a customer support toll free telephone number to assist you with information regarding your Panasonic Digital Satellite System.
WARRANTY INFORMA TION 60 If you want your original receiver repaired, P anasonic will repair it and return the receiver to you. Y ou must carefully pack and seal your receiver in its original carton and packing material, properly insure the receiver for its full value, and pre-pay a reliable common car rier .
61 15167610 FGR SAMPLE INDEX A Access Card 43, 44 new card setup 31 AL T AUD but ton 30 Alternate Audio display screen 31 Alternate audio programs 30 Attractions Guide 10, 24 Audio/video jacks 34 Auto.
62 15167610 FGR SAMPLE INDEX O On-Line Help 32 One-Button Recording editing or cancelling 29 Ordering DSS programming 3 P Password, system forgetting 22 Past purchases 25 P ay-P er -View P rograms 23 .
63 15167610 FGR SAMPLE FCC REGISTRA TION INFORMA TION Y our DSS ® equipment is registered with the Federal Communications Commission and is in compliance with parts 15B and 68, FCC Rules and Regulations. 1. Notification to the Local T elephone Company .
Matsushita Consumer Electronics Compan y , Division of Matsushita Electric Corporation oa America One Panasonic W ay Secaucus, New Jersey 07094 TOCOM 15167610.
An important point after buying a device Panasonic TU-IRD20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TU-IRD20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TU-IRD20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TU-IRD20 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TU-IRD20 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TU-IRD20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TU-IRD20.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TU-IRD20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TU-IRD20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
