Instruction/ maintenance manual of the product VC62B Asus
Go to page of 50
V iv oPC Barebone User Manual.
COP YRIGHT INFORMA TION No part of this manual, including the products and soft ware described in it, may be reproduced , transmitted, transcribed , stored in a retrieval syst em, or translated into a.
VivoPC Bar ebone 3 Contents About this manual ............................................................................................. 4 Con ventions used in this manual ............................................................... 4 T ypography .
4 VivoPC Bar ebone About this manual This manual pro vides information about the hardw are and software featur es of your PC, organiz ed through the follo wing chapters: Chapter 1: Getting to know your V ivoPC This chapter details the har dware components of y our VivoPC.
VivoPC Bar ebone 5 Package contents NO TES: • Actualproductspecicationsandpackagecontentsmay vary depending on the model t ype, country , or region. • Theavailabilityandquantityoftheseitemsvarywithyour Viv oPC package.
6 VivoPC Bar ebone.
1 Getting to know y our V ivoPC.
8 VivoPC Bar ebone Features F ront panel T op cover The remov able top cov er allows you ac cess to the storage devices and the memory modules. IMPORT ANT! Befor e removing the t op cover , turn o your VivoPC and disconnect the power cable and other peripherals.
VivoPC Bar ebone 9 Left side Air ven ts The air vents on the left side allow cooler air t o enter your Viv oPC chassis. IMPORT ANT! F or optimum heat dissipation and air ventilation, ensur e that the air vents ar e free from obstructions.
10 VivoPC Bar ebone P ower butt on The power butt on allows you t o turn the Viv oPC on or o . Y ou can also press the pow er button once to put y our Viv oPC to sleep mode. Memory c ard slot The built-in memory card reader enables your VivoPC to read and write data to and fr om MMC/SD cards.
VivoPC Bar ebone 11 DisplayP or t por t Use this port to connect your VivoPC t o a DisplayP ort or VGA, DVI, or HDMI external display . LAN por t The 8-pin RJ-45 LAN port suppor ts a standard Ethernet cable for connection to a local network.
12 VivoPC Bar ebone Rear air vents The air vents on the r ear allow warm air to exit the VivoPC. IMPORT ANT! F or optimum heat dissipation and air ventilation, keep the air v ents at least 10 cm awa y from any obstructions. P ower input (DC 19V) The supplied power adapt er conv erts AC power to DC power f or use with this jack.
2 Using your V iv oPC.
14 VivoPC Bar ebone Getting started C onnecting the AC pow er adapter T o connect the A C power adapter t o your VivoPC: A. Connect the AC pow er cord t o the AC/DC adapter . B. Plug the AC po wer cor d into a 100 V~240 V power sour ce. C. Connect the DC power connector int o your VivoPC’ s pow er (DC) input por t.
VivoPC Bar ebone 15 NO TE: P ower adapter inf ormation: • Inputvoltage:100 Vac-240 Vac • Inputfrequency :50Hz-60H z • Ratingoutputcurrent:3.
16 VivoPC Bar ebone C onnecting a display panel Y ou can connec t a display panel or projector to y our VivoPC that has the following c onnectors: • HDMIconnector • DisplayP or t.
VivoPC Bar ebone 17 C onnecting USB keyboard or mouse Y ou can connec t generally any USB keyboar d and mouse to your Viv oPC. Y ou can also connect a USB dongle for a wir eless keyboard and mouse set. T o connect a keyboard and mouse t o your VivoPC: Connect the USB cable from your keyboar d and mouse to any of the USB 2.
18 VivoPC Bar ebone T urning on y our V ivoPC Pr ess the power butt on to turn on your VivoPC..
Turning off your VivoPC If your VivoPC is unresponsiv e, pr ess and hold the power button f or at least four (4) sec onds until your VivoPC turns o .
Quickly enter the BIOS T oquicklyentertheBIOS: • Pr essthepowerbutt onforatleastf our(4)secondstoshutdown your VivoPC, then pr ess the power butt on again to turn your Viv oPC back on, then press <F2> or <Del> during POST .
3 Installing syst em components.
22 VivoPC Bar ebone Installing memory modules Y our V ivoPC Bar ebone comes with two SO-DIMM memor y slots that allow you t o install two 2 GB, 4 GB , or 8 GB unbuered with non-EC C 1.35VDDR3204-pinSO-DIMMsforamaximumof16GBmemor y .
VivoPC Bar ebone 23 5. Slide the top cov er towar ds the rear of VivoPC un til it is detached from the chassis. 6. Removetheco verandsetaside. 7. CarefullyslidetheDualBayadapt erfromtheSA T Aconnector then remov e it from the drive ba y .
24 VivoPC Bar ebone Memory 3.5” HD 2.5” HD 10. Align and insert the memor y module into the slot (A) and pr ess it down (B) until it is securely sea ted in place . Repeat the same steps to install the other memory module. IMPORT ANT! Alwa ys install into the low er slot rst.
VivoPC Bar ebone 25 11. Replace the SO-DIMM slot cover (A ) and secure it with the screw (B) you r emoved earlier . Memory 3.5” HD 2.5” HD 12. Replace the Vivo DualBay adapter in to the drive bay then slide it towar ds the SA T A connector .
26 VivoPC Bar ebone Memory 3.5” HD 2.5” HD 13. Replace the top cov er then slide it towar ds the front of Viv oPC to re-attach. 14. Lock the lat ch to securely fasten the t op cover t o the chassis.
VivoPC Bar ebone 27 Installing storage devices Y ou can install t wo 2.5-inch HDDs or SSDs (via the Vivo DualBay adapter) or one 3.5-inch HDD as storage devic e for your Viv oPC barebone. Installing 2.5-inch HDDs/SSDs IMPORT ANT! Ensure t o turn o your VivoPC and disconnect all cables and peripherals before installing an y device or component.
28 VivoPC Bar ebone 4. Remove the co ver and set aside. 5. Carefully slide the Viv o DualBay adapter awa y from the SA T A connector then remov e it from the drive ba y . 6. Placethe VivoDualBa yadapteronaatandstablesurface.
VivoPC Bar ebone 29 8. Detach the top cov er by sliding it tow ards the rear as sho wn. 9. Pr eparea2.5-inchHDDorSSDandthebundledsetofscrew s. 10. Align the SA T A connector of the 2.5-inch HDD or SSD to the SA T A connector on the lower part of the Viv o DualBay adapter then slide the 2.
30 VivoPC Bar ebone 11. Locat e the screw slots at the bottom of the Viv o DualBay adapter then secure the 2.5-inch HDD/SSD to the adapt er using the bundled set of screws . Set aside. 12. Get the top cov er of the Vivo DualBay adapter and place it upside down on a at and stable surface.
VivoPC Bar ebone 31 14. Secure the 2.5-inch HDD or SSD to the top co ver using the set of bundled screws . 15. P lace the top cov er and HDD or SSD assembly into the Viv o DualBay adapter then slide it to wards the SA T A connector .
32 VivoPC Bar ebone 16. Securethetopco verand2.5-inchHDDorSSDassemblytothe Viv o DualBay adapter using the screw s that you r emoved earlier instep7.
VivoPC Bar ebone 33 19. Lockthelat chtosecurelyfastenthet opcovert othechassis. Memory 3.5” HD 2.5” HD 18. Replace the top cov er then slide it towar ds the front of Viv oPC to re-attach. 20. Reconnect all cables and peripherals.
34 VivoPC Bar ebone Installing a 3.5-inch HDD T o install a 3.5-inch HDD: 1. Place the VivoPC on a at and stable surface. 2. Pr ess down the latch at the r ear panel to release the t op cov er of the VivoPC. 3. Slide the top cov er towar ds the rear of VivoPC un til it is detached from the chassis.
VivoPC Bar ebone 35 5. Disconnect the Viv o DualBay adapter fr om the SA T A connector then remov e it from the drive ba y . 6. Removethef ourblackscrewswithrubberheadsfr omthe Vivo DualBay adapter then set aside .
36 VivoPC Bar ebone 8. Attach each of the f our black screws with rubber head assembly into the screw holes of the HDD as sho wn. 9. P ositiontheSerialA T AHDDontopofthedrivebaytoan orientation where the HDD’ s SA T A connec tors are aligned t o the SA T A connector in the VivoPC drive bay .
VivoPC Bar ebone 37 12. Ensure that the Serial A T A HDD is securely seat ed in place and the SA T A connectors are connected properly . Memory 3.5” HD 2.
38 VivoPC Bar ebone 15. Lock the lat ch to securely fasten the t op cover t o the chassis..
App endix.
40 VivoPC Bar ebone Safety information Y our V ivoPC is designed and t ested to meet the latest standar ds of safetyforinf ormationtechnologyequipment.Ho wever ,toensur e your saf ety , it is impor tant that you r ead the follo wing safety instructions.
VivoPC Bar ebone 41 NO DISASSEMBL Y The warr anty does not apply to the produc ts that hav e b een disassembled by users Lithium-Ion Battery W arning CA UTION : Danger of explosion if battery is incorrectly replaced .Replaceonlywiththesameorequivalenttype recommended b y the manufacturer .
42 VivoPC Bar ebone Regulatory notices REA CH Complying with the REA CH (Registration, Evalua tion, Authorization, and Restriction of Chemicals) regulator y framework, we publish the chemical substances in our products at ASUS REACH w ebsite at http://csr .
VivoPC Bar ebone 43 radio or television rec eption, which can be determined by turning theequipmentoandon,theuserisencouragedtotrytocorrect the interference by one or mor e of the following measur es: • Reorientorrelocatether eceivingantenna.
44 VivoPC Bar ebone Fr ance Restric ted W ireless F requency Bands SomeareasofF ranceha vearestrictedfrequencyband. Theworst case maximum authorized power indoors ar e: • 10mWfortheentir e2.4GHzband(2400MHz–2483.
VivoPC Bar ebone 45 Thisrequir ementislikelytochangeov ertime,allowingy outouse your wireless LAN car d in more ar eas within F rance. P lease check with ART for the latest inf ormation (ww w .ar t-telecom.fr) NO TE: Y our WLAN Card transmits less than 100mW , but more than 10mW .
46 VivoPC Bar ebone CE Mark W arning CE marking for devices without wir eless LAN/Bluetooth Theshippedversionofthisdevic ecomplieswiththerequir ements of the EEC directives 2004/108/EC “Electromagnetic compatibility ” and2006/95/EC “Lowvoltagedir ective” .
VivoPC Bar ebone 47 ENERGY ST AR complied product ENERGY ST AR is a joint pr ogram of the U .S. Envir onmental Pr otection Agency and the U.S. Depar tment of Energy helping us all sav e money and protect the envir onment through energy ecient products and practices.
48 VivoPC Bar ebone ASUS contact information ASUST eK C OMPUTER INC. Address 15Li- T eRoad,Peitou , T aipei, T aiwan11259 T elephone +886-2-2894-3447 F ax +886-2-2890-7798 E-mail info@asus.c om.tw W eb site http://www.
VivoPC Bar ebone 49 EC Declaration of Confo rmity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TA IWAN Aut horized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
50 VivoPC Bar ebone DECLARATION OF CO NFORMITY Per FCC Part 2 Section 2. 1077(a) Responsib le Party Name: Asus Computer International Add ress: 800 Corporate Way, Fremont , CA 94539.
An important point after buying a device Asus VC62B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus VC62B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus VC62B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus VC62B you will learn all the available features of the product, as well as information on its operation. The information that you get Asus VC62B will certainly help you make a decision on the purchase.
If you already are a holder of Asus VC62B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus VC62B.
However, one of the most important roles played by the user manual is to help in solving problems with Asus VC62B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus VC62B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
