Instruction/ maintenance manual of the product VB191 Asus
Go to page of 18
VB 195/ VB 191 VB175/ VB171 Series LCD Monitor User Guide Q 5230 V1 January 20 10.
ii Copyright © 20 10 ASUST eK COMPUTER INC. All Rights Reserved. No part of this ma nual, including the product s and software described in it, may be reproduced, tra nsmitted, transcribed, stored in.
iii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
iv Safety information • Before setting up the monitor , carefully read all the documentation that came with the package. • T o prevent re or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury .
v Care & Cleaning • Before you lift or reposition your monitor , it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor . When lifting or carrying the monitor , grasp the edges of the monitor .
vi Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www .
1-1 ASUS LCD Monitor VB195/ VB191/ VB175/ VB171 Series 1.1 Welcome! Thank you for purchasing the ASUS ® VB 195/ VB 191/ VB175/ VB171 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper , broader , and brighter display , plus a host of features that enhance your viewing experience.
1-2 Chapter 1: Product introduction 1.3 Assembling the monitor base T o assemble the monitor base: 1. Connect the base with the monitor. A click indicates that the base has been connected successfully . 2. Adjust the monitor to the angle that is most comfortable for you.
1-3 1.4 Monitor introduction 1.4.1 Front of the LCD monitor 1. button: • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only).
1-4 Chapter 1: Product introduction 1.4.2 Rear of the LCD monitor Rear connectors (from left to right) 5. Power button • Press this button to turn the monitor on/off. 6. Power indicator • Thecolordenitionofthepowerindicatorisasthebelowtable.
2-1 2.1 Adjusting the monitor • For optimal viewing, we reco mmend that you look at the full face of th e monitor , then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle.
2-2 Chapter 2: Setup 2.2 Detaching the arm/stand (for VESA wall mount) The detachable stand of the VB195/ VB191/ VB175/ VB171 Series LCD monitor is specially designed for VESA wall mount. T o detach the arm/stand: 1. Remove the arm cover . 2. Have the front of the monitor face down on a table.
3-1 3.1 OSD (On-Screen Display) menu 3.1.1 Howtorecongure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press + and - again to navigate through the sub-menu functions.
3-2 Chapter 3: General Instruction 2. Image Y ou can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. • Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function.
3-3 5. SystemSetup Allow you to adjust the system. • V olume: the adjusting range is from 0 to 100. is a hotkey to activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V -Position) of the OSD.
3-4 Chapter 3: General Instruction Specications summary *Specicationsaresubjecttochangewithoutnotice. 3. 2 Model VB195T/S/D/N VB191T/S/D VB171T/S/D VB175T/S/D/N Panel Size 19" 19" 17" 17" Max. Resolution SXGA 1280x1024 SXGA 1280x1024 SXGA 1280x1024 SXGA 1280x1024 Brightness(Typ.
3-5 3.3 Troubleshooting (FAQ) Problem PossibleSolution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no screen image • Check if the monitor and the computer are in the ON mode.
3-6 Chapter 3: General Instruction 3.4 Supported operating modes *Modesnotl istedintheabovet ablesmaynotbesu pported. F or optimalr esolution,werecom me.
An important point after buying a device Asus VB191 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus VB191 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus VB191 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus VB191 you will learn all the available features of the product, as well as information on its operation. The information that you get Asus VB191 will certainly help you make a decision on the purchase.
If you already are a holder of Asus VB191, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus VB191.
However, one of the most important roles played by the user manual is to help in solving problems with Asus VB191. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus VB191 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
