Instruction/ maintenance manual of the product TH-50PF20U Panasonic
Go to page of 25
Model No. No. de Modelo TH-42PF20U TH-50PF20U TQB2AA0590 English Español For more detailed instructions, refer to the Operating Instructions on the CD-ROM. T o view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (V ersion 7.
2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons.
3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
4 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
5 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.
6 Safety Precautions W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
+ - + - Ferrite core Use the Ferrite cores to comply with the EMC standard. (see page 20) Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity (+ and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter .
When using the W all-hanging bracket (vertical) Note: When using the W all-hanging bracket (vertical) (TY -WK42PV20), use the holes and to secure the cables. If the clamper is used on the hole , the cables may be caught by the wall-hanging bracket. 8 1 2 Plug the AC cord into the display unit.
9 VIDEO and COMPONENT / RGB IN connection , Y , P B , P R OUT P R P B Y AUDIO OUT R L VIDEO OUT AUDIO OUT R L Notes: • Change the “COMPONENT/RGB-IN select” setting in the “SETUP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection).
10 HDMI connection DVI-D IN connection [Pin assignments and signal names] 19 3 1 4 2 18 Note: Additional equipment and HDMI cable shown are not supplied with this set. Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S Data2+ 11 T .M.D.S Clock Shield 2 T .
Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Stereo mini plug (M3) Audio Connect a cable which matches the audio output terminal on the computer .
6 7 8 9 1 3 4 52 COMPUTER RS-232C Straight cable D-sub 9p (Male) (Female) 12 Connections SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only .
INPUT MENU ENTER/ + / VOL - / 13 Power Indicator Remote Control Sensor Power ON / OFF Connecting the AC cord plug to the Plasma Display . Connecting the plug to the W all Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet fi rst.
PC FULL NANODRIFT English (UK) Deutsch Français Italiano Español ENGLISH (US) Русский OSD LANGUAGE SET SELECT PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 99:99 .
INPUT MENU ENTER/ + / VOL - / INPUT MENU ENTER/ + / VOL - / 15 Selecting the input signal Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Outputs the sound as set in “Audio input select” in the Options menu. • Select to match the signals from the source connected to the component/RGB input terminals.
16 INPUT MENU ENTER/ + / VOL - / MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 18) INPUT button (Input signal selection) (see page 15) Main Power On / Off Switch Power Indicator The Power Indicator will light.
17 Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode.
18 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press to select. (Example: PICTURE menu) MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing PICTURE SOUND POS. /SIZE SET UP 2 Select the item.
Overview Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. 1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SAVE OFF .
Using Network Function This unit has a network function to control the network connected display with your computer . Note: T o use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”.
Speci fi cations TH-42PF20U TH-50PF20U Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Rated Power Consumption 400 W 475 W On mode Average Power Consumption ∗ 165 W 220 W Stand-by condition Save OFF 0.9 W , Save ON 0.4 W Save OFF 0.9 W , Save ON 0.
Panasonic Professional Display Company Unit of Panasonic Corporation of North America One Panasonic W ay 1F-10 Secaucus, NJ 07094 Panasonic Professional Flat Panel Display Limited W arranty Models or Parts Part W arranty Labor W arranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express warranties except as listed above.
Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED W ARRANTY ST A TEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCD Imaging B.
Note.
<Software Information for This Product> This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are stated.
An important point after buying a device Panasonic TH-50PF20U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TH-50PF20U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TH-50PF20U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TH-50PF20U you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TH-50PF20U will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TH-50PF20U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TH-50PF20U.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TH-50PF20U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TH-50PF20U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
