Instruction/ maintenance manual of the product TC-P50G25 Panasonic
Go to page of 76
TM Quick Start Guide See page 8-17 Guía de inicio rápido vea la página 8-17 Operating Instructions 42”/46”/50”/54” Class 1080p Plasma HDTV (41.
2 VIERA Link™ is a trademark of Panasonic Corporation. VIERA CAST™ is a trademark of Panasonic Corporation. SDXC Logo is a trademark of SD-3C, LLC. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
3 Viewing Advanced F AQs, etc. Quick Start Guide This product qualifies for ENERGY ST AR in the “Home Use” setting and this is the setting in which energy savings will be achieved.
4 Safety Precautions W ARNING: T o reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.
5 Do not place any objects on top of the Plasma TV . If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV , please consult an Authorized Service Center .
6 CEA CHILD SAFETY NOTICES: Flat panel displays are not al ways supported on the proper stands or installed according to the manufacturer’s recommendati ons. Flat panel displays that are inappro priat ely situated on dressers, bookcases, shelves, desks, speaker s, chests or carts may fall over and may cause personal injury or even death.
7 Do not display a still picture for a long time This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty .
8 Accessories/Optional Accessory Accessories Remote Control T ransmitter N2QA YB000486 Batteries for the Remote Control T ransmitter (2) AA Battery AC cord Pedestal TBLX0146 (TC-P42G25) TBLX0147 (TC-P46G25, TC-P50G25) Product Registration Card (U.S.A.
9 Quick Start Guide Accessories/Optional Accessory Accessories Assembly screws A XYN5+F18FN (for 42”/46”/50”) M5 × 18 (Silver) (3) XYN5+F25FN (for 54”) M5 × 25 (Silver) (4) B THEL080N (for 4.
10 Accessories/Optional Accessory (Continued) AC cord connection Antenna terminal Pin terminals HDMI terminal green blue red green Firmly tighten by hand. Match colors of plugs and terminals. Insert firmly . Insert firmly . Reference of connection T o attach T o remove Insert it firmly until the tabs on both sides click into place.
11 Quick Start Guide Basic Connection (Antenna + TV) Accessories/Optional Accessory T o connect the antenna terminal Basic Connection Note Not all cables and external equipment shown in this book are supplied with the TV . For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
12 High-Definition Standard-Definition Note For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
13 Quick Start Guide Identifying Controls Basic Connection (A V cable connections) Remote control Switches TV On or Of f (Standby) Viewing from SD Card (p. 22-25) Lights the buttons for 5 seconds Press again to turn off the button lights Changes the input mode (p.
14 First T ime Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p.
15 Quick Start Guide First T ime Setup Press to return to the previous screen Note About broadcasting systems Analog (NTSC): Conventional broadcasting Digital (A TSC): New programming that allows you .
16 Press to return to the previous screen Configure Network settings Select the Network type Network settings Step 5 of 6 Checks for proper network connection, settings and communication to the Internet and server automatically. RETURN OK Select Automatic Manual Network settings Step 5 of 6 Selects Ethernet cable or wireless network.
17 Quick Start Guide First T ime Setup Press to return to the previous screen Adjust the Clock (Set clock) Select NEXT then press OK to go to the next step.
18 W atching TV Basic connection (p. 1 1-12) T o watch TV and other functions T urn power on (TV) or (Remote) Note If the mode is not TV , press and select TV .
19 Viewing W atching TV Information Recall Displays or removes the channel banner 15-2 12:30 PM 30 THE NEWS CC SAP TV -G 1 0 8 0 i Standard 4:3 ABC-HD Channel Station identifier SAP indication Signal .
20 W atching TV (Continued) Set the Favorite Feature 1 Display the SUB MENU. 2 Select “Set favorite” All Setup SUB MENU Edit CH caption Signal meter Set favorite Channel surf mode select OK 3 Set .
21 Viewing Using VIERA TOOLS W atching TV Using VIERA T OOLS VIERA TOOLS is the easy way to access frequently-used menu items. They are displayed as shortcut icons on the TV screen. Unlike a conventional menu, you can enjoy using, playing or setting a function quickly .
22 Media information Inserting or removing an SD card/USB flash memory SD card USB flash memory Insert the card Gently insert the SD Card label surface facing front. Label surface Push until a click is heard Remove the card Press in lightly on SD Card, then release.
23 Viewing Viewing with VIERA IMAGE VIEWER Press to exit from a menu screen Press to return to the previous screen Insert a Media (SD card or USB flash memory) * This setting will be skipped next time unless you select “Set later” (SD card only).
24 Switch Thumbnail view Slideshow Sort Change thumbnail Info Media Player Photos All photos Media select R G B Y OK Select RETURN Slideshow Sort Info Media Player Photos All photos Media select R G B Y OK Select RETURN Change thumbnail In (p. 23) 7 x 4 (28 photos) 10 x 6 (60 photos) Sort In (p.
25 Viewing Viewing with VIERA IMAGE VIEWER Photo settings In or (p. 23) Adjust the Picture and Audio Display “Photo settings” example: Picture menu Picture menu/Audio menu (p.
26 VIERA CAST TM Y ou can access information services (TV content) from the Home screen via the Internet. Y ou need broadband environment to use this service. Operate VIERA CAST Press to exit from a menu screen Press to return to the Home screen Preparations Internet connections (p.
27 Viewing VIERA CAST TM Internet connections Contact your Broadband service provider NOTICE: If you don’t have Internet service by your local provider , please order a high-speed Internet service at no less than the following connection speed. If you already have such service, make sure that the connection speed exceeds the following.
28 Network Camera ■ Press to exit from a menu screen ■ Press to return to the previous screen Preparations Internet connections (p. 27) Example of Network connection (p. 27) Network settings (p. 42-45) Before connecting the Network camera to the TV , please complete “IP setting” and run “Connection test”(p.
29 Viewing Network Camera Network camera setting Before using a Network camera, you need to register the camera as shown below . Y ou can also set default camera or disconnect/delete the registered cameras. ■ Press to exit from a menu screen ■ Press to return to the previous screen Follow direction - in “Network settings” (p.
30 W atching V ideos and DVDs If you have applicable equipment connected to the TV , you can watch videos and DVDs on the TV screen. Input Select Y ou can select the external equipment to access.
31 Viewing W atching V ideos and DVDs VIERA Link TM Setting If you connect equipment that has the “HDA VI Control” function to the TV using an HDMI cable, you will find it easier to use. Please refer to p. 36-41. Before using these functions, you need to set “VIERA Link” setting to “On” as shown below .
32 Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV . Y ou can also listen to PC sound with the audio cable connected.
33 Viewing Advanced How to Use Menu Functions Displaying PC Screen on TV How to Use Menu Functions V arious menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV best suited for you.
34 Menu list Menu Item Adjustments/Configurations (alternatives) Picture Reset to defaults* Resets all picture adjustments to factory default settings except for “Advanced picture”. Picture mode Basic picture mode (Vivid/Standard/THX/Game/Custom) (p.
35 Advanced How to Use Menu Functions (picture, sound quality , etc.) Menu list Menu Item Adjustments/Configurations (alternatives) Lock Locks the channels and programs. (p. 46) Closed caption Closed caption Displays subtitles (Closed caption) (p. 50) Setup Channel surf mode Sets the mode to select the channel with the Channel up/down button.
36 VIERA Link TM “HDA VI Control TM ” Simultaneously control all Panasonic “HDA VI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have the “HDA VI Control” function.
37 Advanced VIERA Link TM “HDA VI Control TM ” VIERA Link TM Connections Follow the connection diagrams below for HDA VI control of a single piece of A V equipment such as a DVD recorder (DIGA), Home theater system. Refer to page 38-41 for Setup Menu settings and additional control information.
38 VIERA Link TM “HDA VI Control TM ” Press to exit from a menu screen Press to return to the previous screen Display the menu Select “Setup” Menu Adjusts Surf mode, Language, Clock, Channels, Inputs, and other settings.
39 Advanced VIERA Link TM “HDA VI Control TM ” (Continued) When using a Blu-ray Disc player , DVD player/recorder or Home theater system, the TV will automatically change to the appropriate input, when playback begins on one of those devices. For a Home theater system the speakers automatically switch to the theater system.
40 VIERA Link TM “HDA VI Control TM ” Y ou can enjoy more convenient operation with the “HDA VI Control” function in the “VIERA Link” menu.
41 Advanced VIERA Link TM “HDA VI Control TM ” Y ou can select the Home theater or TV speakers for audio output. Control the theater speakers with the TV remote control. This function is available only when a Panasonic Amplifier or Player theater is connected.
42 Network Settings This is a setting for connecting to a broadband environment. Press to exit from a menu screen Press to return to the previous screen Display the menu Select “Setup” Menu Adjusts Surf mode, Language, Clock, Channels, Inputs, and other settings.
43 Advanced Network Settings Check that the Network settings are as shown below , and then start “Connection test”. Select “Connection test” and press OK Displayed Connection test screen (It takes a while to cancel the test.
44 Network Settings Press to exit from a menu screen Press to return to the previous screen Display the menu Select “Setup” Menu Adjusts Surf mode, Language, Clock, Channels, Inputs, and other settings.
45 Advanced Network Settings [IP setting] Select “IP setting mode” and set to “Automatic” Manual setting Select “IP setting mode” and set to “Manual” Select the item and press OK Check.
46 Channel lock Game lock Program lock VIERA CAST lock Change password Lock Y ou can lock specified channels or shows to prevent children from watching objectionable content. Press to exit from a menu screen Caution Make a note of your password in case you forget it.
47 Advanced Lock Note This television is designed to support the “Downloadable U.S. Region Rating System” when available. (Available only in U.S.A.) The Off rating is independent of other ratings. When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also be blocked.
48 Auto program Set automatically Manual program Set manually Signal meter Check signal strength Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions.
49 Advanced Editing and Setting Channels Automatically searches and adds available channels to the memory . Select “ANT in” Select “Cable” or “Antenna” Or select “Not used” (p. 15). Select “Auto program” Menu Cable ANT/Cable setup ANT in Auto program Manual program Signal meter next select Select a scanning mode (p.
50 Closed Caption Press to exit from a menu screen Display the menu Select “Closed caption” Menu Primary CC1 On Closed caption Digital Mode Analog Digital setting Reset to defaults Display broadcast TV’s Closed Caption (CC) text when available.
51 Advanced Input Labels Closed Caption Input Labels Input labels Display labels of connected devices Devices connected to external input terminals can be labeled for easier identification during the input selection. (In selecting the input mode from p.
52 Using T imer The TV can automatically turn On/Of f at the designated date and time. The Clock must be set before On time/Off time settings. (p. 17) The “Sleep” timer and “On / Off timer” will not work if the “Auto power on” (p. 35) is set.
53 Advanced Recommended A V Connections Using T imer Recommended A V Connections These diagrams show our recommendations of how to connect the TV unit to your various equipment. For other connections, consult the instructions for each piece of equipment and its specifications.
54 Ratings List for Lock “V -chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry . (p. 47) U.S. MOVIE RA TINGS (MP AA) NR NO RA TING (NOT RA TED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply .
55 F AQs, etc. T echnical Information Ratings List for Lock T echnical Information Closed Caption (CC) For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST , ZOOM or 4:3; characters might be cut off).
56 T echnical Information (Continued) Data format for SD Card /USB flash memory browsing Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF** standards Data format-Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0) Max.
57 F AQs, etc. T echnical Information VIERA Link TM “HDA VI Control TM ” HDMI connections to some Panasonic equipment allow you to interface automatically .
58 1 678 3 9 45 10 15 14 13 12 11 2 T echnical Information (Continued) DIGIT AL AUDIO OUT terminals Y ou can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the DIGIT AL AUDIO OUT terminals.
59 F AQs, etc. Care and Cleaning T echnical Information Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint- free cloth.
60 FA Q Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details (p. 65, 66) For additional assistance, please contact us via the website at: www .
61 F AQs, etc. Frequently Asked Questions If there is a problem with your TV , please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer , quoting the model number and serial number (both found on the rear of the TV).
62 TC-P42G25 TC-P46G25 Power Source AC 120 V , 60 Hz Power Consuamption Maximum 327 W 384 W Standby condition 0.3 W 0.2 W Plasma Display panel Drive method AC type Aspect Ratio 16:9 Visible screen size (W × H × Diagonal) (No. of pixels) 42 ” class (41.
63 F AQs, etc. Specifications TC-P50G25 TC-P54G25 Power Source AC 120 V , 60 Hz Power Consumption Maximum 441 W 465 W Standby condition 0.2 W 0.2 W Plasma Display panel Drive method AC type Aspect Ratio 16:9 Visible screen size (W × H × Diagonal) (No.
64 P ANASONIC CONSUMER ELECTRONICS COMP ANY , DIVISION OF P ANASONIC CORPORA TION OF NORTH AMERICA One Panasonic W ay Secaucus, New Jersey 07094 Panasonic Plasma T elevision Limited W arranty Limited .
65 F AQs, etc. Customer Services Directory (for U.S.A. and Puerto Rico) Limited W arranty (for U.S.A. and Puerto Rico only) Customer Services Directory (for U.
66 Limited W arranty (for Canada) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 P ANASONIC PRODUCT – LIMITED W ARRANTY Panasonic Canada Inc.
67 F AQs, etc. Limited W arranty (for Canada) Note tc_p42_46_50_54_g25_eng_0585.ind67 67 tc_p42_46_50_54_g25_eng_0585.ind67 67 2010/01/27 17:49:36 2010/01/27 17:49:36.
Note.
Note.
Note.
Note.
Note.
Note.
Note.
Note.
Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.
An important point after buying a device Panasonic TC-P50G25 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic TC-P50G25 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic TC-P50G25 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic TC-P50G25 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic TC-P50G25 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic TC-P50G25, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic TC-P50G25.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic TC-P50G25. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic TC-P50G25 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
