Instruction/ maintenance manual of the product SDR-S10 Panasonic
Go to page of 120
EP Operating In structions SD V ideo Camera Model No. SDR-S10 Before use, pleas e read these ins tructions completely . VQT1E 14 EB EP GC GN VQT1E14(EB_GC_ENG).
2 VQT1E 14 Caution for A C mains lead (For United Ki ngdom) For your safety , please read the following text carefully . This appliance is supplied with a moulded three pin mains plug for your safety and conv enience. A 5-ampere fuse is fitted in this plug.
3 VQT1 E14 Before use Remove the connector cover . How to r eplace t he fuse The location o f the fuse differ according to the type of AC mains plug (f igures A and B). Confirm the AC mains plug fitted and follow the instructions below . Illustrations may differ from actual AC mains plug.
4 VQT1E 14 ∫ EMC Electric and magne tic com p atibil ity This symbol (CE) is located on the rating plate. (EB/EP only) IF THE POWER CORD OF THIS EQUIPM ENT IS DAM AGED, I T MU ST BE REPLA CED WITH A N ELECTRI CALL Y APPROVED POWER CORD. Use only th e recomm ended acc essories.
5 VQT1 E14 -If you see this symbol- ∫ Indemnity concerning recording content The manufacturer s hall in no event be liable for the loss of recordings due to malfunction or defect of this unit, it s accessories or recordable media.
6 VQT1E 14 ≥ Microsoft ® , Windows ® and DirectX ® are either registered trademarks or trademark s of the Microsoft Corp oration in the United St at es and/or other countr ies. ≥ Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
7 VQT1 E14 Caution for AC mains lead (For United Kingdom) ............... .. 2 Information fo r your safety ........3 Before using Features ......... ........... ................. .. 9 Wa ter r esist ance..... ....... .... ...... ...... 9 Shock p roof .
8 VQT1E 14 Playb ack Motion pic ture playback ...........60 Sti ll picture play back .... ............64 Editing Editing ...... ................. .................6 6 Deleting scenes . .................. ........ 66 Locking scenes ....................
9 VQT1 E14 Before using Before us ing Features This unit is a water resist ant video camera com plying with the IPX4 specifications* of the IEC 60529 “Degrees of protection provided by enclosures (IP Co de)”.
10 VQT1E 14 Before us ing This unit is a high shock proof video camera that passed a drop test* from a height of 1.2 meters. * This test confirmed to “MIL-STD 810F Method 516.
11 VQT1 E14 Before using Accessories Check the a ccessories before using this unit. Some optional accessories may not be available in some countries. SD Memory Card (2 GB) Battery pack VW-VBJ10 AC ada.
12 VQT1E 14 Before us ing Part s identification and handling 1L e n s 2 White balance sensor ( l 57) 3 Microph one (bui lt-in, ste reo) 4 LCD monitor open part ( l 15) 5 St atus indicato r ( l 23) 6 R.
13 VQT1 E14 Before using 15 LCD monitor ( l 15) 16 Delete button [ ] ( l 66) 17 Speaker 18 Mode select buttons [AUTO]/ [MANUAL A F/MF] ( l 38, 53, 55) 19 Mode dial ( l 23) 20 Reset button [RESET] ( l .
14 VQT1E 14 Before us ing ∫ About the Card/battery door and the T erminal cover If dirt, dust or liquids such as water get inside the Card/battery door or the T erminal cover , it may caus e the unit to malfunction.
15 VQT1 E14 Before using T o use a tripod (VW - CT45E; opt ional), the tripod adapto r on the 2-way h and strap (supplied) must be attached to this unit. (Please carefully read the op erating instructions for how t o attac h the unit to the tripod.) 1 Attach the 2-way hand str ap and the tr ipod adapt or to the unit.
Before us ing 16 VQT1E 14 SD card This unit can be used for recording motion pictures and s till pictures to an SD card. *1 Cannot be guaranteed in operation. The rec ording may suddenly st op during motion picture recording depending on the SD card you use.
Before using 17 VQT1 E14 ≥ A MultiMediaCard cannot be used on this unit. ≥ When the write-protect switch A on SD c ard is locked, no recording, deletion or editing will be possible on the c ard. ∫ About SD cards that you can use for motion picture recording.
Before us ing 18 VQT1E 14 ∫ Handling precautions ≥ Do not touch the terminals on the back of the card. ≥ Do not expose the terminals of the card to water , garbage or dust. ≥ Do not place in the following areas: j In direct sunlight. j In very dusty or humid areas .
19 VQT1 E14 Setup Setup Power supply The unit is in the standby co ndition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. When this unit is purchased, the battery is not charged.
20 VQT1E 14 Setup 4 Connect t he A C adaptor (supplied) A to thi s unit and the A C outlet. 1 Slide the terminal cover lock to OPEN and then open the terminal cover . 2 Connect the AC cable to the AC adaptor , then the AC outlet. 3 Connect the AC adaptor t o this unit’s DC input terminal.
21 VQT1 E14 Setup charging the battery a gain. If the battery still fails to charge, something may be wrong with the unit, battery , AC adaptor etc. Contact your dealer . When the status indi cator is off: ≥ Charging is completed. ≥ When the status indicator do es not flash, reinsert the battery or the AC adaptor .
Setup 22 VQT1E 14 The times show n in the tables below are for when the temperature is 25 o C and the humidity is 60%. If the temperat ure is higher or lower than 25 o C, the charging time will become longer . ∫ Charging time ≥ The charging time shown in the table are appr oximations.
23 VQT1 E14 Setup Selecting a mode Rotate the mode dial to video rec ording, video playback, picture recording, picture playback or power OFF. Rotate the mode dial slowly but s urely . Set the mode dial to , , or . ≥ Align the desired mode pictograph to the position shown in the illustration.
24 VQT1E 14 Setup The power can be turned on and off with the LCD monitor when the mode dial is set to or . ∫ T o turn on the power Open the LCD monitor . The status indicator lights and th e power turns on. ∫ T o turn off the power Close the LCD monitor .
25 VQT1 E14 Setup 2 Close the LCD m onitor while the mode di al is set to or . The status indicator A flashes green and the unit goes into quick start standby mode. 3 Open the L CD monitor . The status indicator A lights red and the unit is put into recording p ause approx.
26 VQT1E 14 Setup Insert ing/removing an SD card Be sure to set the mode dial to OFF before inserting/rem oving an SD card. 1 Set the mode dial to OFF. ≥ Check that the s tatus indicator has gone off. 2 Slide the ca rd/battery d oor lock in the direction of the arrow an d then open t he card/ battery d oor .
27 VQT1 E14 Setup ∫ Card ac cess lamp ≥ When this unit accesses the SD card (reading, recording, playb ack, erasing, etc.), the access lamp lights up. ≥ If the following operations are performed when the access lamp is lit, then the SD c ard or the recorded data may be dam aged or this unit m ay malfunction.
28 VQT1E 14 Setup ¬ Rot ate the mode dial to s elect or . 1 Press the curs or button in the centre and th e icons wi ll be displayed on the screen . ≥ The indication disappears when the cursor button in the centre is pressed again. ≥ The indication changes each time the cursor button is pressed down.
Setup 29 VQT1 E14 About auto mode and manual mode ( l 38) Vid eo reco rding mode ≥ The shaded operation icons are not displayed while recording. About the operation icons displayed in each mode Icon.
Setup 30 VQT1E 14 Video playback mode Icon Direction Func tion Page 1 / ;3 Playback/pause 60 ∫4 S t op playback and show t humbnails 60 : 2 Skip 60 6 Rewind 61 2; Reverse slow/frame playback (during pause) 61, 62 9 1 Skip 60 5 Fast for ward 61 ;1 Forward slow/f rame playback (durin g pause) 61, 62 VQT1E14(EB_GC_ENG).
Setup 31 VQT1 E14 Picture recording m ode Picture playback m ode Icon Directi on Functi on Page (1/2) 3 Backlight compensat ion 46 Ø 2 Self tim er 50 1 Help mode 32 (2/2) 2 Soft skin mode 49 (3/3) When the [MANUAL AF/MF] button is pressed to set to manual mode.
32 VQT1E 14 Setup ∫ Help mode The help mode explains the operation icons that are displayed when unit is set to AUTO in video/pi cture recording mode. ≥ Rotate the mode dial to select or . 1 Press the cursor button i n the centre to display the icon during the recording pause.
33 VQT1 E14 Setup Using the menu screen Refer to “Menu list” ( l 92) for information about the menus. 1 While st opped, press the MENU button. The menu displayed diff ers depending on the position of t he mode dial. ≥ Do not switch the mode dial when the menu is displaye d.
34 VQT1E 14 Setup T o get back to the pre vious screen Press the cursor button left. T o exit the menu sc reen Press the MENU button. ≥ The menu screen does not appear during recording or playing. Y ou cannot start other operations while the menu screen appears.
35 VQT1 E14 Setup ≥ The 24-hour system is used to display the time. 3 Press the curs or button in the centre to enter the sel ection. ≥ The clock function starts at [00] seconds w hen the cursor button in the centr e is pressed. ≥ After pressing the ME NU button to finish the setting, check the date and time display .
36 VQT1E 14 Setup Adjusting the LCD monitor 1 Press the M ENU button, the n select [SETUP] # [LCD SET] # [YES] and then press the cursor but ton in the centre. 2 Press the curs or button up or down to se lect the item to be adjusted. T hen, press the button lef t or right to make the adjustment.
Recording 37 VQT1 E14 Recording Before record ing First, format the S D card if one which has been us ed on another device is going to be used for the f irst time on t his unit. ( l 70) W hen the SD c ard is formatted, a ll of the recorded data is deleted.
Recording 38 VQT1E 14 ≥ This unit has lens-protecting glass to prevent drops of water getting in the lens. If there is dirt or drops of water on the lens -protecting glass, w ipe them off before recording. We recomm end using the cleaning cloth. ≥ If there are drops of water on the m icrophone, the recorde d sound will be distor ted.
Recording 39 VQT1 E14 Recording motion pictures ≥ When the unit is purchased, the aspect ratio i s set to [16:9] for recording images compatible with a wide-screen TV . T o watch images on a regular TV (4: 3), change the aspect rati o setting ( l 51) before recording the images or when watching them on the connected TV ( l 72).
Recording 40 VQT1E 14 A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R 0h00m] flashes red. ) C Recording time elapsed ≥ Sound is recor ded from the internal s tereo microphone on t he front of the unit.
Recording 41 VQT1 E14 Changing the recor ding mode of the mot ion picture. ¬ Rot ate the mode dial to s elect . Press the ME NU bu tton, then sele ct [BASIC] # [REC MODE] # desired it em and then pre ss the cursor b utton in the centre.
Recording 42 VQT1E 14 ≥ Recordable time u sing the battery ( l 22) ≥ 8 MB and 16 MB SD cards cannot be used for motion picture recording. ≥ If an SD c ard is recorded on or erased m any times, it may no l onger be possible to record motion pictures even if there is available memory on the SD card.
Recording 43 VQT1 E14 Recording still pictures ≥ S t ill pict ures are recorded at a picture size of 640 k 480 pixels on this unit. 1 Rot ate the mo de dial to se lect . 2 Press the record but ton. The unit automatically focuses on the s ubject at the centre of screen (when a uto focus is selected).
Recording 44 VQT1E 14 A Size of sti ll pictures B Remaining number of still pictures (Flashes in red when [R 0] appears.) C Quality of still pictures Y ou can add a shu tter sound when rec ording still pictures. Press the ME NU bu tton, then sele ct [ADV A NCED] # [SHTR EFFECT] # [ON] and the n press the cursor button in the centre.
45 VQT1 E14 Recording V arious record ing functions Y ou can zoom in up to 10 k op ticall y . ¬ Rot ate the mode dial to s elect or . Press the z oom button. ≥ If you take your finger off the zoom button during zoom operations, the operation sound may be recorded.
46 VQT1E 14 Recording ≥ The larger the digital zoom magnification, the more the image quality is degraded. ≥ This function cannot be used in picture recording mode. The zoom microphone is linked to the zooming operation so that far-away sounds with a tele-shot and close-up sounds with a wide-angle shot are recorded more clearly .
47 VQT1 E14 Recording ¬ Rot ate the mode dial to s elect . 1 Press the curs or button in the centre. Then press the butt on down to dis play the ico n shown in t he illustration. 2 Press the c ursor button le ft to select [ ]. 3 Press the record but ton.
48 VQT1E 14 Recording T o sele ct the colour fo r fade in/ out The colour which appear s in fading pictures can be selected. Press the M ENU button, t hen select [ADV ANCED] # [FADE COL OUR] # [WHITE] or [BLACK] and then press the cursor b utton in th e centre.
49 VQT1 E14 Recording T o cancel the Colour ni ght view function Select [ ] again. ≥ The Colour night view function makes the signal charging time of CCD up to approximately 25 k longer than usual, so that dark scenes can be recorded brightly . For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction.
50 VQT1E 14 Recording Y ou can record still pictures using the timer . ¬ Rot ate the mode dial to s elect . 1 Press the curs or button in the centre. Then press the butt on down to dis play the ico n shown in t he illustration. 2 Press the c ursor button le ft to select [ Ø ].
51 VQT1 E14 Recording Y ou can check if the im age is level while recording by using the lines displaye d on the screen. ¬ Rot ate the mode dial to s elect or . Press the M ENU button, then select [BASIC] # [GUIDE L INES] # [ON] and then press the cu rsor button in the centre.
52 VQT1E 14 Recording Reduces the image s haking (jitter) due to hand movement when recording. ¬ Rot ate the mode dial to s elect . Press the M ENU button, then select [ADV ANCED] # [SIS] # [ON] and the n press the cursor button in the centre.
53 VQT1 E14 Recording ¬ Rot ate the mode dial to s elect . Press the M ENU button, then select [ADV ANCED] # [WIND CUT] # [ON] an d then press the c ursor button in the centre. T o cancel the wind noise reduction func tion Press the MENU button, then select [ADV ANCED] # [WIND CUT] # [OFF ] and then press the cursor button in the centre.
54 VQT1E 14 Recording [ 5 ] Sport s T o record s ports scenes or sc enes where there are quick m otions [ ] Portrait T o make people stand out against t he background [ ] Low light T o make the s cene.
55 VQT1 E14 Recording If auto focusing is difficult due to the conditions, then m anual focusing is available. ¬ Rot ate the mode dial to s elect or . 1 Press the MANUAL AF/MF button until th e icon shown in the illustratio n below is disp laye d. The manual focus [MF] indication appears.
56 VQT1E 14 Recording The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually . ¬ Rot ate the mode dial to s elect or . 1 Press the MANUAL AF/MF button.
57 VQT1 E14 Recording 1 Select [ ] and then fill the screen wi th a white subject. 2 Press the curs or button up to select [ ]. When the [ ] display changes from flashing to on, setting is complete. ≥ When the [ ] display continues flashing, the white balance cannot be set because the place is dark etc.
58 VQT1E 14 Recording Shutter Speed: Adjust it when recording fast-moving subjects. Aperture: Adjust it when the screen is too bright or too dark. ¬ Rot ate the mode dial to s elect or . 1 Press the MANUAL AF/MF button. The icon sh own in the illustration is displayed automatically .
59 VQT1 E14 Recording ∫ Manual sh utter speed adjustment ≥ Avoid recording under fluorescen t light, mercury light or sodium light because the colour and brightness of the playback image may change.
Playback 60 VQT1E 14 Playback Motion picture playback Play back the motion pictures. 1 Rot ate the m ode dial to select . The motion pictures (up to 8 scenes) recorded on t he SD card are displayed as thumbnails. 2 Select the s cene to be played ba ck.
Playback 61 VQT1 E14 ∫ About motion picture comp a tibility ≥ This unit can play back MPEG 2 formatted files. ≥ This unit is based on the SD- Video st andard.
Playback 62 VQT1E 14 The motion picture is advanced one frame at a t ime. 1 Press the curs or button up durin g playback to p ause the playback. 2 Press the curs or button right. (The frames will be a dvanced one at a time in the reve rse directi on when yo u press the cursor button le f t.
Playback 63 VQT1 E14 3 Select the s cene to be played ba ck. ≥ The playback setting returns to [VIEW ALL] if the unit is turned off or t he mode dial is operated. ≥ Even if scenes are recorded on the same day , they are grouped separately when the number of scenes exceeds 99.
Playback 64 VQT1E 14 Sti ll picture playback Play back the still pictures. 1 Rot ate the mo de dial to se lect . The still pictures (up to 8 files) recorded on the SD card are displayed as thumbnails. 2 Select the fi le to be p layed back . A File number B Scroll bar display The selected file will be encircled by a yellow frame.
Playback 65 VQT1 E14 ∫ About still picture compatibility ≥ This unit is compliant with the unif ied standard DCF (Design rule for Camera File system) established by JEIT A (Japan Electronics and Information T echnology Industries Asso ciation). ≥ The file format s upported by this unit is JPEG.
66 VQT1E 14 Editin g Editing Editing The deleted scenes cannot be restore d. ¬ Rot ate the mode dial to s elect or . 1 Press the button during playback. 2 When the co nfirmation message appe ars, select [YES], then press the cursor button in the centre.
67 VQT1 E14 Editing 3 (Only when [SELECT] is selected in step 2) Select the scene to be delete d, then press th e cursor button in the centre . The selected scene is encircled by a red frame. ≥ When the cursor button in the centre is pressed again, the selected scene will be cance lled.
68 VQT1E 14 Editin g Scenes can be locked so that they are not deleted by mistake. (Even if you lock some scenes on an SD card, formatting the SD card will delete them.
69 VQT1 E14 Editing Y ou can writ e the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rot ate the mode dial to s elect . 1 Press the M ENU button, the n select [PHOTO SETUP] # [DPOF SET] # [SET] and then press the cu rsor button in the centre.
70 VQT1E 14 Editin g Card management Please be aware that if an SD card i s formatted, then all the data recorded on the card will be erased. S tore important dat a on a computer , etc. We recommend using MotionSD STUDIO etc. to acqu ire data recorded on this uni t.
71 VQT1 E14 With other product s With other pro ducts With a TV The motion pictures and still pictures recorded by this unit can be played back on a TV . ≥ Use the A C adaptor to free yo u from worrying about the battery running down. 1 Slide the term inal cover loc k to OPEN and then o pen the terminal cover .
72 VQT1E 14 With ot her produc t s ≥ The channel set will dif fer depending on the terminal to which the unit is connec ted. 5 St art playback o n this unit. The image and audio are output on the TV . ∫ If the image or audio from this unit is not output on the TV ≥ Check that the plugs are inserted as far as they go.
73 VQT1 E14 With other product s With a DVD recorder If you have a DVD recorder with an SD card slot, images recorded by th is unit can be copied (dubbed) onto the hard disk or a DVD disc. Refer to the operating instructions of your DVD re corder for informat ion about whether or not it supports copying (dubbing) from an SD card.
74 VQT1E 14 With ot her produc t s With a VCR Y ou can record (dub) images played back on this unit onto other video devices. ≥ Use the A C adaptor to free yo u from worrying about the battery running down. 1 Slide the term inal cover loc k to OPEN and then o pen the terminal cover .
75 VQT1 E14 With other product s 5 St art playback o n this unit. Then st art recording on the connected devi ce. ≥ See the ope rating instructions of the video device f or details. T o stop recording (d ubbing) S t op recording on the c onnected device.
76 VQT1E 14 With ot her produc t s 2 Connect t his unit to a p rinter . A USB cable (supplied) ≥ Insert the p lugs as far as they will go. ≥ Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB cables.
77 VQT1 E14 With other product s 8 Select the p aper size s etting on [P APER SIZE]. ≥ Y ou cannot set paper sizes not supported on the printer . 9 Select the la yout setting on [P AGE LA YOUT]. ≥ Y ou cannot set page layouts not supported on the printer .
With a comp uter 78 VQT1E 14 With a compute r With a computer (Wi ndows) When the CD-ROM (supplied) is inserted into the computer , the [Setup Menu] screen will appear . ∫ Video editing sof tware MotionSD STUDIO 1.2E This software allows pictures t o be ac quired from this unit, edited and output.
With a computer 79 VQT1 E14 Before opening the CD-ROM package, please read the following. End User License Agreement Y o u (“Licen see”) are gran ted a license for the Software defined in this End User Lice nse Agreemen t (“Agre ement”) on condit ion that yo u agree t o the term s and cond itions of this Ag reement.
With a comp uter 80 VQT1E 14 ≥ A CD-R OM drive is necessary to install the supplied software. ≥ When 2 or more USB devices are connect ed to a computer , or when devices are connected through USB hubs or by using ex tension cables, proper operation is not guaranteed.
With a computer 81 VQT1 E14 ≥ The supplied CD-R OM is available for Windows only . ≥ Operation is not guaranteed on comput ers that are not I BM PC/A T co mpatible. ≥ This software is n ot compatib le with a multi-boot environm ent. ≥ This software is not compatible with a multi-CPU environment.
With a comp uter 82 VQT1E 14 ∫ Operating environment for the card reader function (EB/EP only), the card reader/writer function (GC/GN only) (Mass storage) ≥ The USB equipment operates with the d river installed as standard in the OS.
83 VQT1 E14 With a computer When installing the software, log on to your computer as the Administrat or or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager . ) ≥ Before starting the install ation, close any other software applications which are running.
84 VQT1E 14 With a comp uter 5 Af ter the inst allation is complete, [ Readme.txt] are disp laye d. Ch eck t he content s, then click [ t ] on top right of the w indow . 6 Click [Finish ]. ≥ Depending on the operating environment, you ma y be required to install DirectX 9.
85 VQT1 E14 With a computer For details on how to use Mo tionSD STUDIO, read the PDF instructions. Select [st art] > [All Programs (Programs)] > [Panasonic] > [MotionSD STUDIO 1.2E] > [Manual]. ≥ After starting the software, on t he menu select [Help] > [Manual] to display the help files.
86 VQT1E 14 With a comp uter 3 Connect t his unit and a computer . A USB cable (supplied) ≥ Insert the p lugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully . ≥ Do not use any other USB connection cables except the supplied one.
87 VQT1 E14 With a computer T o ver ify if this unit i s corr ectly recognised by the c omputer , turn on this units power and then con nect the unit to the computer with a USB cable and follow the steps below .
88 VQT1E 14 With a comp uter When the unit is connected to a computer , it is recog nised as an external drive. ∫ Drive icons [Removable Disk] is displayed in [My Computer]. ≥ Windows XP: ≥ Windows 2000: ∫ Exam ple fo lder st ructur e ≥ SD-Video format mot ion pictures are stored in the [ PRG ¢¢¢ ] folder.
89 VQT1 E14 With a computer ≥ Before initial use, select the s oftware’s [Readme First] from the start menu, then read through the additional instructions or updated information. ≥ The End U ser Licence Agree ment is displayed when the software is f irst started, so read carefully through its terms and conditions, then click [I agree].
90 VQT1E 14 With a comp uter 1 Double click the ic on in t ask tray di splayed on t he computer screen. Hardware disconnect dialog appears. ≥ Depending on your computer ’s settings, this icon may not be displayed. 2 Select [USB Mass S torage Device] and click [S top].
With a computer 91 VQT1 E14 With a computer (Macintosh) ≥ Even if the s ystem requirements m entioned in these operating inst ructions are fulfilled, some computers cannot be used. ≥ Apple and Mac OS are trademarks of Apple Inc. ≥ PowerPC is a trademark of International Busin ess Machines Corporation.
92 VQT1E 14 Others Others Menus Motion picture recording menus ∫ [BASIC] [SCENE MODE] ( l 53) [GUIDE LINES] ( l 51) [REC MODE] ( l 41) [REC ASPE CT] ( l 51) [CLOCK SET] ( l 34) ∫ [ADV ANCED] [D.
93 VQT1 E14 Other s Motion picture playback menus ∫ [PLA Y SETUP] [PLA Y MODE] ( l 62) [RESUME PLA Y] ( l 63) [LOCK SET] ( l 68) ∫ [SETUP] [DISPLA Y] ( l 94) [DA TE/TI ME] ( l 35) [DA TE FORMA T] ( l 35) [FORMA T CARD] ( l 70) [PO WER SA VE] ( l 94) [BEEP SOU ND] ( l 94) [POW ER L CD] ( l 36) [LCD SET] ( l 36) [TV A SPECT] ( l 72) [EXT .
94 VQT1E 14 Others ∫ [DISPLA Y] The screen indications are selected as shown in the illustration below . ∫ [POWER S A VE] [OFF]: The power s aving function is not activated. [5 MINUTES]: When about 5 minutes have p assed without any operation, this unit automatically turns of f to p revent the battery from running down.
95 VQT1 E14 Other s ∫ [DEMO M ODE] This item is us ed to start the unit demonstration. (Only when u sing the AC adaptor and the mode dial is at the or position) If you set this to [ ON] without inserting an SD car d, this unit is autom atical ly set to the demonstration mode for introducing its functions.
96 VQT1E 14 Others Indica tions ∫ Recording indications Indications Motion picture recording S till picture recording Remaining batte ry power R 1h30m Remaining time for recording 0h00m00s Elapsed recording time 15.
97 VQT1 E14 Other s ∫ Playba ck indicat ions ∫ Confirmatory indications Motion picture playbac k S t ill pi cture playback 1 Playback ; Pause 5 , / 6 , Fast forward/rewind 7 / 8 Last/first scene p.
Others 98 VQT1E 14 Messa ges CANNOT RECORD. Data writing to the SD card has failed. NO DA T A. There are no motion pic tures or still pictures recorded on the SD card. If this message appear s although data is recorded on the SD card, the condition of the card is probably not stable.
Other s 99 VQT1 E14 It is possible that t he system cannot complete writing of a file normally when, f or example, power is turned off for some reason during recording or editing. If faulty management information is found when the card is accessed, the following message may appear .
Others 100 VQT1E 14 Functions that cannot be used si mult aneously Some funct ions in this un it are disab led or cannot be selecte d due to the unit’ s specifications. The table below sh ows examples of f unctions restricted by vario us condi tions.
Other s 101 VQT1 E14 T roubleshoo ting Probl em Check points This unit ca nnot be turne d on. The st atus indicator flashes when the uni t is turned on wh ile using the batte ry . ≥ Is the battery fully charged? # Charge the battery us ing the AC adaptor .
Others 102 VQT1E 14 This unit ca nnot be opera ted th ough it is tur ned on . This unit do es not operate normally . ≥ The unit cannot be operated u nless you open th e LCD mon ito r .
Other s 103 VQT1 E14 Recor ding does not st art althoug h the power is su pplied to this u nit and th e SD card is correctly inserted. ≥ Has the SD card’ s writ e protect switch been set to LOCK? # No recording is possible while the write protect switch is set to LOCK.
Others 104 VQT1E 14 Auto focus funct ion doe s not work . ≥ Is manual fo cus mode selected? # Set the unit to auto focus mode by pressing the AUTO button.
Other s 105 VQT1 E14 Scenes or files cannot be del eted or edited. ≥ Are the scenes or the files locked? # Locked scenes or files cannot be deleted. Release the lock setting. ( l 68) ≥ It may not be possible to delete scenes that are displayed as [ ] on the thumbnail display .
Others 106 VQT1E 14 “PUSH THE RESET SWITCH.” i s displayed. ≥ The unit h as automatically detected an error . T o protect the data, remove the SD card and then press the RE SET button wit h a pointed object.
Other s 107 VQT1 E14 With a comp uter Probl em Check points Even if connected by the USB cable, this unit is not recognised by the computer . ≥ The USB function selection screen does not appear if the USB cable is connected while the menu screen is displayed.
108 VQT1E 14 Others Cautions for use (For Australia) In the event of abnormal operation (e.g. if the unit emit s smoke or an unusual smell), immediately stop operating the unit and consult the Panasonic Customer Care Cent re on 132600. ≥ The unit and car d become warm after long operation, but this is not a malfunction.
109 VQT1 E14 Other s Do not use benzine, pai nt thinner or alcohol for cleaning the unit. ≥ Before cleaning, detach the battery or pull out the AC cable from the AC outlet. ≥ The camera body may be discoloured and the surface finish may peel of f.
11 0 VQT1E 14 Others as a ski resort, the period during which you can record pictures is shortened. ≥ When you travel, do not forget to bring an AC adaptor (supplied) so that you can recharge the batteries at your destination. If you dro p the battery acci dent ally , check to see if the terminals are damaged .
111 VQT1 E14 Other s ≥ When the LCD monitor gets dirty , wipe it with a dry soft cloth. ≥ In a place w ith drastic temperature changes, condensation may form on the LCD monitor .
11 2 VQT1E 14 Others Explanation of terms Automatic white balance White balance adjustment recognises the colour of light and adjusts so the white colour will bec ome a purer white.
11 3 VQT1 E14 Other s ≥ Attempts to bring an object with higher contra st into focus. ≥ Focuses on the screen centre only . Due to these c haracteristics, auto fo cus does not work correctly in the following situations. Record pictures in the manual focus mode.
Others 11 4 VQT1E 14 Speci fications SD Vide o Camera Information for your safety Power sour c e: Powe r con sumpt ion: DC 4.8 V (When using AC adapt or) DC 3.
Other s 11 5 VQT1 E14 Motion picture s USB Card reade r function (EB/EP only), Card reader/wr iter function (GC/GN only) (No cop yright protection support) Hi-S peed USB (USB 2.0) compliant, USB terminal T ype miniB PictBridge-compliant Dim ensio ns (excluding the projecting parts) 31 mm ( W) k 63 mm (H) k 11 4 m m ( D ) Mass Approx.
Others 11 6 VQT1E 14 St ill pict ures AC adaptor Information for your safety Battery pack Information for your safety S pec ifications may change without prior notice.
Other s 11 7 VQT1 E14 ≥ The number of recordable pictures depends on whether [ ] and [ ] are used together and on the s ubject being recorded . ≥ The numbers shown in the t able are approximations.
11 8 VQT1E 14 Others Others Index ∫ Numerics 2-way hand st rap . . . . . . . . . . . . . . . 14 ∫ A AC adaptor . . . . . . . . . . . . . 20, 21, 1 10 Adobe Acrobat Read er . . . . . . . . . . 78 Apertu re . . . . . . . . . . . . . . . . . . . . . .
11 9 VQT1 E14 Other s ∫ S Scene mode . . . . . . . . . . . . . . . . . . . 53 SD Memory Card . . . . . . . . . . . . . . . 16 SD S peed Class . . . . . . . . . . . . . . . . 18 SDHC Memory Card . . . . . . . . . . . . 16 Self-ti mer recor ding . . .
VQT1E14 F0307Kk0 ( 8000 A ) E Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net VQT1E14(EB_GC_ENG).book 120 ページ ２ ００７年２月２８ 日 水曜日 午後２ 時.
An important point after buying a device Panasonic SDR-S10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic SDR-S10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic SDR-S10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic SDR-S10 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic SDR-S10 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic SDR-S10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic SDR-S10.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic SDR-S10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic SDR-S10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
