Instruction/ maintenance manual of the product TRL-DLS Asus
Go to page of 86
TRL-DLS Dual T ualatin™ Motherboard USER’S MANUAL.
2 ASUS TRL-DLS User’ s Manual DISCLAIMER/COPYRIGHTS Product Name: ASUS TRL-DLS Manual Revision: 1.03 E979 Release Date: May 2002 No part of this manual, including the products and software described.
ASUS TRL-DLS User’ s Manual 3 ASUS CONT ACT INFORMA TION ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 General Email: info@asus.
4 ASUS TRL-DLS User’ s Manual CONTENTS 1. INTRODUCTION ............................................................................. 7 1.1 How This Manual Is Or ganized .................................................. 7 1.2 Item Checklist ........
ASUS TRL-DLS User’ s Manual 5 CONTENTS 4.3 Main Menu ................................................................................ 42 4.3.1 Primary & Secondary Master/Slave .............................. 44 4.3.2 Keyboard Features ...........
6 ASUS TRL-DLS User’ s Manual FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: .
ASUS TRL-DLS User ’ s Manual 7 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEA TURES Production information and specifications 3. HARDW ARE SETUP Instructions on setting up the motherboard.
8 ASUS TRL-DLS User ’ s Manual 2. FEA TURES Specifications 2. FEA TURES 2.1 ASUS TRL-DLS Motherboard The ASUS TRL-DLS motherboard is designed for server systems that require flexible configurations.
ASUS TRL-DLS User ’ s Manual 9 2. FEA TURES 2. FEA TURES Optional Components • A T A-100 IDE Support: Comes with an onboard PCI Bus Master IDE controller with two connectors that support four IDE devices on two channels.
10 ASUS TRL-DLS User ’ s Manual 2. FEA TURES Performance 2. FEA TURES 2.1.2 Performance • Ultra Performance: Onboard Ultra160 dual channel SCSI controller with two connectors that support 30 Ultra160 SCSI devices in two channels.
ASUS TRL-DLS User ’ s Manual 11 2. FEA TURES 2. FEA TURES Intelligence 2.1.3 Intelligence • Fan Status Monitoring and Alarm: T o prevent system overheat and system damage, the CPU, power supply , and system fan speeds are monitored. All the fans are set to normal RPM range and alarm thresholds.
12 ASUS TRL-DLS User ’ s Manual 2. FEA TURES 2. FEA TURES MB Components 2.2 TRL-DLS Motherboard Components See opposite page for locations. Location Processor Support (2) Socket 370 for Pentium ® III T ualatin ™ /Coppermine Processors ...........
ASUS TRL-DLS User ’ s Manual 13 2. FEA TURES 2. FEA TURES Component Locations 2.2.1 Component Locations 2 3 4 5 6 8 7 15 14 13 12 9 10 17 18 16 19 20 11 1 21 22 27 26 23 25 24.
14 ASUS TRL-DLS User ’ s Manual 3. HARDW ARE SETUP 3.1 TRL-DLS Motherboard Layout Motherboard Layout 3. H/W SETUP NOTE: The SCSI and eRMC components are optional.
ASUS TRL-DLS User ’ s Manual 15 3. HARDW ARE SETUP Jumper 1) P1_66EN p. 16 PCI Slot Setting Expansion Slots 1) DIMMB1/2/3 p. 17 168-Pin System Memory Support DIMMA1/2/3 2) CPU p. 19 Central Processing Unit (CPU) 3) PCI66-1/2/3/4 p. 21 64-bit PCI Bus Expansion Slots PCI5, PCI6 p.
16 ASUS TRL-DLS User ’ s Manual 3. HARDW ARE SETUP Jumper 3. H/W SETUP 3.3 Hardware Setup Procedure Complete the following steps before using your computer: 1. Check motherboard settings 2. Install memory modules 3. Install the Central Pr ocessing Unit (CPU) 4.
ASUS TRL-DLS User ’ s Manual 17 3. HARDW ARE SETUP System Memory 3. H/W SETUP 3.5 System Memory This motherboard uses interleaved PC133 Dual Inline Memory Modules (DIMMs).
18 ASUS TRL-DLS User ’ s Manual 3. HARDW ARE SETUP Insert a DIMM into the DIMM socket as shown. Because the number of pins are different on either side of the breaks, the module only fits in one direction. SDRAM DIMMs have different pin contacts on each side.
ASUS TRL-DLS User ’ s Manual 19 3. HARDW ARE SETUP 3.6 Central Processing Unit (CPU) The motherboard comes with a dual Socket 370 for Intel Pentium III Coppermine (256KB L2 cache) and T ualatin (512KB L2 cache) CPUs running up to 1.53+GHz with 133MHz Front Side Bus (FSB).
20 ASUS TRL-DLS User ’ s Manual 3. HARDW ARE SETUP CPU Installation 3. H/W SETUP 3.6.1 Installing the CPU and T erminator Follow these steps to install a CPU. 1. Locate the ZIF socket on the motherboard. 2. Unlock the socket by pressing the lever sideways then lifting it up to a 90 ° -100 ° angle.
ASUS TRL-DLS User ’ s Manual 21 3. HARDW ARE SETUP 3.7 Expansion Slots W ARNING! Unplug the power supply when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards.
22 ASUS TRL-DLS User ’ s Manual 3. HARDW ARE SETUP The following table lists the default IRQ assignments for standard PC devices. Use this table when configuring your system and for resolving IRQ conflicts.
ASUS TRL-DLS User ’ s Manual 23 3. HARDW ARE SETUP Peer -to-Peer PCI Bus Configuration Diagram 3.7.3 PCI Configuration Diagram Expansion Cards 3. H/W SETUP Socket 370 RCC CNB20HE-SL MA Cntl MD 133MH.
24 ASUS TRL-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP 3.8 Connectors 1) IDE Connectors (40-1 pin PRIMAR Y/SECONDAR Y) These connectors support A T A-100 IDE hard disks. Use IDE ribbon cables to connect the master and slave devices to these connectors.
25 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 3) W ake-On-LAN Connector ( 3 -pin WOL_CON) This connector supports a LAN card with a W ake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card.
26 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 4) W ake-On-Ring Connector ( 2 -pin W O R ) This connector connects to internal modem cards with a W ake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card.
27 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 6) T wo 68-pin Ultra160 SCSI Connectors (CHA-WIDE, CHB-WIDE) This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the two channels. Each channel can support a maximum of 15 devices as specified by Ultra160 standards.
28 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 7) CPU and Chassis Fan Connectors (3-pin CPUF AN1/2, SYSF AN1/2) These connectors support cooling fans of 860mA (10.3 W atts) or less. Orient the fans so that the heat sink fins allow airflow to go across the onboard heat sink(s) instead of the expansion slots.
29 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 8) SMBus Connector (6-1 pin SMB) This connector allows you to connect SMBus (System Management Bus) devices. SMBus devices communicate by means of the SMBus with an SMBus host and/ or other SMBus devices.
30 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 10) A TX Power Connector (20/24-pin block A TXPWR, 8-pin CON12V) The 20/24-pin connector is for an A TX power supply with 20/24-pin power connector . The connector from the power supply is designed to fit this connector in only one orientation.
31 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 1 1. Serial Port 2 connector (10-1 pin COM2) This connector accommodates a second serial port using an optional serial port bracket. Connect the bracket cable to this connector then install the bracket into a slot opening at the back of the system chassis.
32 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors 13) USB Header (10-1 pin USBPOR T) If the USB ports at the back panel are inadequate, one USB header is available for two additional USB port connectors. Connect the USB header to a 2-port USB connector set and mount the bracket to an open slot in the chassis.
33 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Connectors • NIC Activity LED Lead (2-pin) This shows the status of the NIC through a panel-mounted LED. • Status LED (2-pin) This shows the system status as programmed through the ASUS ASIC.
34 3. HARDW ARE SETUP ASUS TRL-DLS User ’ s Manual 3. H/W SETUP Starting Up 3.9 Starting Up the First T ime 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are of f (in some systems, marked with ). 3.
ASUS TRL-DLS User ’ s Manual 35 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 4.1 Managing and Updating Y our BIOS 4.1.1 Upon First Use of the Computer System It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory W riter utility (AFLASH.
ASUS TRL-DLS User ’ s Manual 36 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Curr ent BIOS T o File screen appears. 6. T ype a filename and the path, for example, A:XXX-XX.
ASUS TRL-DLS User ’ s Manual 37 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 4.1.2 Updating BIOS Procedures 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONT ACT INFORMA TION on page 3 for details) and save to the boot floppy disk you created earlier .
ASUS TRL-DLS User ’ s Manual 38 4. BIOS SETUP 4. BIOS SETUP 7. The utility starts to program the new BIOS information into the Flash ROM. The boot block is updated automatically only when necessary . This minimizes the possibilities of boot problems in case of update failures.
ASUS TRL-DLS User ’ s Manual 39 4. BIOS SETUP 4. BIOS SETUP NOTE: Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only , and may not exactly match what you see on your screen.
ASUS TRL-DLS User ’ s Manual 40 4. BIOS SETUP 4. BIOS SETUP Program Information 4.2.1 BIOS Menu Bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features.
ASUS TRL-DLS User ’ s Manual 41 4. BIOS SETUP 4. BIOS SETUP Program Information General Help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1> or the <Alt> + <H> combination.
ASUS TRL-DLS User ’ s Manual 42 4. BIOS SETUP 4. BIOS SETUP Main Menu System Time [XX:XX:XX] Sets your system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59) .
ASUS TRL-DLS User ’ s Manual 43 4. BIOS SETUP 4. BIOS SETUP Master/Slave Devices Language [English (US)] This field displays the BIOS language version. Supervisor Password [Disabled] / User Password [Disabled] These fields allow you to set passwords.
ASUS TRL-DLS User ’ s Manual 44 4. BIOS SETUP 4. BIOS SETUP 4.3.1 Primary & Secondary Master/Slave Type [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu.
ASUS TRL-DLS User ’ s Manual 45 4. BIOS SETUP 4. BIOS SETUP [User Type HDD] Manually enter the number of cylinders, heads and sectors per track for the drive.
ASUS TRL-DLS User ’ s Manual 46 4. BIOS SETUP 4. BIOS SETUP Master/Slave Devices Translation Method [LBA] Select the hard disk drive type in this field. When Logical Block Addressing (LBA) is enabled, the 28-bit addressing of the hard drive is used without regard for cylinders, heads, or sectors.
ASUS TRL-DLS User ’ s Manual 47 4. BIOS SETUP 4. BIOS SETUP Keyboard Features PIO Mode [4] This option lets you set a PIO (Programmed Input/Output) mode for the IDE device.
ASUS TRL-DLS User ’ s Manual 48 4. BIOS SETUP 4. BIOS SETUP Advanced Menu 4.4 Advanced Menu Hotkey to Lock Keyboard [Disabled] This field allows you to activate the OS independent keyboard lock function using selected hot keys. Y ou must set a user password or a supervisor password before enabling the keyboard lock feature.
ASUS TRL-DLS User ’ s Manual 49 4. BIOS SETUP 4. BIOS SETUP Advanced Menu PS/2 Mouse Function Control [Auto] The default of [Auto] allows the system to detect a PS/2 mouse on startup. If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved for expansion cards only if a PS/2 mouse is not detected.
ASUS TRL-DLS User ’ s Manual 50 4. BIOS SETUP 4. BIOS SETUP Chip Configuration 4.4.1 Chip Configuration Video Memory Cache Mode [UC] USWC (uncacheable, speculative write combining) is a new cache technology for the video memory of the processor . It can greatly improve the display speed by caching the display data.
ASUS TRL-DLS User ’ s Manual 51 4. BIOS SETUP 4. BIOS SETUP I/O Device Config Floppy Disk Access Control [R/W] When set to [Read Only], this field protects files from being copied to floppy disks by allowing reads from the floppy disk drive but not writes.
ASUS TRL-DLS User ’ s Manual 52 4. BIOS SETUP 4. BIOS SETUP 4.4.3 PCI Configuration PCI Configuration Slot 1, Slot 2, Slot 3, Slot 4, Slot 5, Slot 6 IRQ [Auto] These fields set how IRQ use is determined for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ use.
ASUS TRL-DLS User ’ s Manual 53 4. BIOS SETUP 4. BIOS SETUP PCI Configuration Onboard SCSI BIOS [Auto] [Auto] allows the motherboard BIOS to detect whether you have a Adaptec SCSI controller . I f the SCSI controller is detected, the SCSI BIOS will be enabled.
ASUS TRL-DLS User ’ s Manual 54 4. BIOS SETUP 4. BIOS SETUP Shadow Configuration 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns of f the video display and shuts down the hard disk after a period of inactivity .
ASUS TRL-DLS User ’ s Manual 55 4. BIOS SETUP 4. BIOS SETUP Power Menu Video Off Option [Suspend -> Off ] This field determines when to activate the video of f feature for monitor power management. Configuration options: [Always On] [Suspend -> Off] Video Off Method [DPMS OFF] This field defines the video of f features.
ASUS TRL-DLS User ’ s Manual 56 4. BIOS SETUP 4. BIOS SETUP Power Menu AC PWR Loss Restart [Disabled] This allows you to set whether you want your system to reboot after the power has been interrupted. [Disabled] leaves your system of f. [Previous State] reverts your system to the same state before the power interruption.
ASUS TRL-DLS User ’ s Manual 57 4. BIOS SETUP 4. BIOS SETUP Power Up Control Automatic Power Up [Disabled] This allows an unattended or automatic system power up. Y ou may configure your system to power up at a certain time of the day by selecting [Everyday] or at a certain time and day by selecting [By Date].
ASUS TRL-DLS User ’ s Manual 58 4. BIOS SETUP 4. BIOS SETUP Power Up Control 4.5.2 Hardware Monitor MB Temperature [xxxC/xxxF] CPU1 Temperature [xxxC/xxxF] CPU2 Temperature [xxxC/xxxF] The onboard hardware monitor is able to detect the MB (motherboard) and CPU temperatures.
ASUS TRL-DLS User ’ s Manual 59 4. BIOS SETUP 4. BIOS SETUP Hardware Monitor Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices.
ASUS TRL-DLS User ’ s Manual 60 4. BIOS SETUP 4. BIOS SETUP Boot Menu Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Y es] is selected, interrupts may be reassigned by the OS.
ASUS TRL-DLS User ’ s Manual 61 4. BIOS SETUP 4. BIOS SETUP Boot Menu 4.7 Server Menu Remote Console [Disabled] This field allows the text mode VGA display to be sent out to VT100 terminal through COM1. This function is effective at BIOS POST and DOS environment.
ASUS TRL-DLS User ’ s Manual 62 4. BIOS SETUP 4. BIOS SETUP Exit Menu Exit Saving Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off.
ASUS TRL-DLS User ’ s Manual 63 4. BIOS SETUP 4. BIOS SETUP Exit Menu Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When this option is selected or if <F5> is pressed, a confirmation is requested.
ASUS TRL-DLS User ’ s Manual 64 4. BIOS SETUP 4. BIOS SETUP.
TRL-DLS Dual T ualatin ™ Motherboard 5. OS Driver Installation.
66 ASUS TRL-DLS User ’ s Manual Contents 5.1 Micr osoft ® W indows ® NT Server 4.0 .............................................. 67 I. Adaptec ® SCSI Driver Installation ............................................. 67 A. Preparing an Adaptec Driver Disk .
ASUS TRL-DLS User ’ s Manual 67 5. OS Driver Installation 5. Driver Installation 5.1 Microsoft ® W indows ® NT Server 4.0 I. Adaptec ® SCSI Driver Installation W indows NT 4.0 does not have the drivers for the Adaptec SCSI controller . Y ou must create a driver disk prior to W indows NT 4.
68 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation 5. When prompted, insert the floppy disk that you labeled “ Ultra160 FMS v1.1 1 for Micr osoft Windows NT 4.0 Setup Disk . ” 6. Press Enter and follow the succeeding screen instructions.
ASUS TRL-DLS User ’ s Manual 69 5. OS Driver Installation 5. Driver Installation B2. Boot Floppy Disk Installation 1. Start the W indows NT installation by booting from the Microsoft Setup floppy disk. 2. Press Enter when the W elcome to Setup screen appears.
70 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation C. Existing System Installation 1. Boot W indows NT system and log on as Administrator . 2. Click on the Start button. Select Settings — >Control Panel . 3. Double click on SCSI Adapters icon.
ASUS TRL-DLS User ’ s Manual 71 5. OS Driver Installation 5. Driver Installation II. Intel ® 82550 Network Driver Installation A. Preparing Intel 82550 LAN Driver Diskette If you need to use a floppy disk to install the on-board Intel 82550 network adapter drivers, use the dcreat.
72 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation 6. Click OK to finish and configure any protocols as prompted 7. Restart W indows NT when prompted. II. A TI ® Rage XL Display Driver Installation 1. Insert the ASUS TRL-DLS support CD into your CD-ROM drive.
ASUS TRL-DLS User ’ s Manual 73 5. OS Driver Installation 5. Driver Installation Win2000 Server 5.2 Microsoft ® W indows ® 2000 Server I. Adaptec ® SCSI Driver Installation The Microsoft W indows 2000 Server can autodetect the onboard AIC7899W SCSI controller on the TRL-DLS motherboard.
74 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation 1 1. In some cases, a message will state that this driver is not digitally signed.
ASUS TRL-DLS User ’ s Manual 75 5. OS Driver Installation 5. Driver Installation II. Intel ® 82550 Network Driver Installation A. Preparing Intel 82550 LAN Driver Diskette Use a floppy disk to install the onboard Intel 82550 network adapter drivers with the MAKEDISK.
76 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation Win2000 Server 10. The following screen appears when the driver update process is completed. Click Finish . W indows 2000 system prompts if you want to restart the system.
ASUS TRL-DLS User ’ s Manual 77 5. OS Driver Installation 5. Driver Installation Novell Netware 5.3 Microsoft ® W indows ® XP Professional W indows XP contains default driver to support Intel 82550 chipset, A TI Rage XL chipset, and Adaptec AIC7899W SCSI chipset.
78 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation Novell Netware 3. Select Ultra160 FMS 1.1 1 from the options that appear . Press Enter to display the following. 4. Select Novell Netwar e 3.1x, 4.xx and 5.xx . Press Enter .
ASUS TRL-DLS User ’ s Manual 79 5. OS Driver Installation 5. Driver Installation Novell Netware B. NetW are 5.X New Installations 1. Begin the file server installation according to the instructions in the file server installation chapter in the Novell NetW are Installation Manual.
80 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation Novell Netware 3. Highlight Disk and CD-ROM Drivers (e.g., IDEA T A). Press Enter and load an additional driver . Then press the INS key . The system always defaults to the A: path.
ASUS TRL-DLS User ’ s Manual 81 5. OS Driver Installation 5. Driver Installation Novell Netware where [operating system] is the OS for which you are creating the diskette, and [destination] is the drive letter and path (such as A:). If no destination is specified, the A: drive will be used.
82 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation Novell Netware Where: SLOT=x Specifies the NBI (NetW are Bus Interface) slot number . Substitute x with the valid value for the adapter . Y ou will be prompted with the slot number(s) of installed PRO/100+ adapters.
ASUS TRL-DLS User ’ s Manual 83 5. OS Driver Installation 5. Driver Installation SCO OpenServer 5.5 SCO OpenServer 5.0.x I. Adaptec ® SCSI Driver Installation SCO Open Server 5.0.x does not include the drivers for the Adaptec SCSI controller . Y ou must create a driver disk prior to SCO OpenServer installation.
84 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation SCO OpenServer 5. Select either “ SCO Unixware 2.1x ” or “ SCO Unixware 7.x ” or “ SCO OpenServer 5.0.x ” . Press Enter . 6. When prompted, insert the floppy disk that you labeled “ Ultra160 FMS v1.
ASUS TRL-DLS User ’ s Manual 85 5. OS Driver Installation 5. Driver Installation SCO OpenServer II. Intel ® 82550 Network Driver Installation SCO OpenServer 5.0.6 system can correctly recognize Intel 82550 network controller during installation. Y ou don ’ t need to load or modify the network driver for the onboard LAN device.
86 ASUS TRL-DLS User ’ s Manual 5. OS Driver Installation 5. Driver Installation RedHat Linux 5.6 Linux RedHat 7.x I. Adaptec ® SCSI Driver Installation The Linux RedHat 7.2 comes bundled with Adaptec AIC7899W Ultra SCSI driver . II. Intel ® 82550 Network Driver Installation Linux RedHat 7.
An important point after buying a device Asus TRL-DLS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus TRL-DLS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus TRL-DLS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus TRL-DLS you will learn all the available features of the product, as well as information on its operation. The information that you get Asus TRL-DLS will certainly help you make a decision on the purchase.
If you already are a holder of Asus TRL-DLS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus TRL-DLS.
However, one of the most important roles played by the user manual is to help in solving problems with Asus TRL-DLS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus TRL-DLS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
