Instruction/ maintenance manual of the product SC-AK403 Panasonic
Go to page of 20
RQT6707-3P CD Stereo System Operating Instructions Model No. SC-AK610 SC-AK510 SC-AK410 SC-AK403 Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. SC-AK610 and SC-AK403 are available in the U.
Before using RQT6707 2 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. Unless otherwise indicated, illustrations in these operating instructions are of SC-AK510.
Before using RQT6707 3 Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below.
Before using RQT6707 4 Batteries The remote contr ol Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters directly in front of the unit. • Keep the transmission window and the unit’s sensor free from dust. • Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets.
Before using RQT6707 5 (R) (L) 2 AM loop antenna Stand the antenna up on its base. 1 FM indoor antenna Adhesive tape Affix where reception is best. 4 A C po wer supply cor d Note The included AC po wer supply cord is for use with this unit only . Do not use it with other equipment.
Before using RQT6707 6 1 AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC power supply. 2 Standby/on switch ( f f f f f /I, POWER) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
RQT6707 Recording operations Cassette deck operations 7 The radio: manual tuning Preparation: Press [TUNER BAND] to select “FM” or “AM”. Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin.
RQT6707 Cassette deck operations 8 1 Press [ c , OPEN/CLOSE] to open the tray. The unit comes on. 2 Set a CD in the tray. (Label must face upward.) To continue loading CDs in the other trays Press [1] – [5] to select the required tray and press [ c , OPEN/ CLOSE] to open the tray.
RQT6707 Recording operations Cassette deck operations 9 To listen to specific CDs and tracks (CD Play Mode function) Remote control only Preparation: Press [ : / J , CD] and then [ L , CLEAR].
RQT6707 Cassette deck operations 10 Total number of albums (on the current disc) Total number of tracks (on the current disc) File format indicator How discs with MP3/WMA diff er fr om CDs CD Play Mode function for MP3/WMA Remote control only Preparation: Press [ : / J , CD] and then [ L , CLEAR].
RQT6707 Recording operations Cassette deck operations 11 Album skip play During play or stop Push the joystick up/down ([ALBUM /CHARA] or [ALBUM /CHARA]) to select the desired album. Remote control: Press [ALBUM ( or )]. When selecting in the stop mode: Press [ : / J , CD] to start play.
RQT6707 Cassette deck operations 12 How discs with MP3/WMA differ from CDs 1 1 1 1 1 Push the joystick up/down ([ALBUM /CHARA] or [ALBUM /CHARA]) to select the required character. Each time you push the joystick up ([ALBUM /CHARA]), the characters change in the following order.
RQT6707 Recording operations Cassette deck operations 13 CD display for MP3/WMA Remote control only During play or pause Press [CD DISP] to select a desired CD display mode.
RQT6707 14 You can use either deck 1 or deck 2 for tape playback. Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. 1 Press [ : , TAPE].
RQT6707 15 To stop recording Press [ L , STOP]. If the tape finishes before the CD The CD continues playing. Press [ L , STOP] to stop it. To record on the other side of the tape Turn the tape over and press [ a REC]. Reducing noise when recording AM Remote control only Hold down [PLAY MODE] while recording.
Timer operations RQT6707 16 A demonstration of the display is shown if you have not set the clock. You can reduce the power consumed in standby mode by turning it off.
Timer operations RQT6707 Reference 17 To cancel the timer Press [SHIFT] + [ r PLAY/REC] to clear the timer indicator from the display. (The timer comes on at the set time everyday if the timer is on.) To change the settings (when the unit is on) To change the play/record times Do steps 1, 2, 3 and 5.
Timer operations RQT6707 18 T r oubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.
Timer operations RQT6707 Reference 19 Specifications AMPLIFIER SECTION SC-AK610 Power output THD 10%, both channels driven 55 Hz – 120 Hz (Low channel) 65 W per channel (12 Ω ) 120 Hz – 4 kHz (M.
20 Reference RQT6351 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc.
An important point after buying a device Panasonic SC-AK403 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic SC-AK403 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic SC-AK403 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic SC-AK403 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic SC-AK403 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic SC-AK403, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic SC-AK403.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic SC-AK403. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic SC-AK403 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
