Instruction/ maintenance manual of the product PV-DC1000 Panasonic
Go to page of 32
R PV -DC1000 For assistance, call 1-800-272-7033. Please read these instructions thoroughly before operating this product. Digital Camera Operating Instructions.
2 Thank you and congratulations on your purchase of this state of the art Panasonic Digital Camera. This product has been manufactured and tested to Panasonic’s highest standards to give you the best in performance and reliability. Save this operating instruction manual as an operating and information guide.
3 Information Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 T able of Contents Things Y ou Should Know ..................................................................................................... 2 Information ..........................................................................................
5 Index of Controls Rear View Strap Attachment Ring See page 3. LCD Viewfinder See page 10. OSD Button See pages 10, 11, 17. MODE Button See page 12. POWER Switch (PLAY•OFF•REC) While pressing the center button, slide the POWER switch to REC or PLAY.
6 Index of Controls Digital Camera Station (Front View) 1 Slide the Battery Compartment lid in the direction of the arrow and swing it open. 2 Install the Battery Pack with the arrow mark at the bottom and facing the rear of the Digital Camera. 3 Swing the Battery Compartment lid down and slide it shut.
7 Power Supply Charging the Battery Pack (PV-BPN10 only) Install the Battery Pack (see page 6.) Charge the Battery Pack fully before operation. 1 Connect DC OUT on the AC Adaptor to DC IN on the Digital Camera Station until it locks with a click. 2 Plug the AC Adaptor into an AC outlet.
8 Power Supply Battery Pack Notes Caution: • Charge only with specified charger. • The Battery can be charged within a temperature range of 32 ° F (0 ° C) and 104 ° F (40 ° C). • The Battery Pack may be warm after charging or just after use.
9 Power Supply AC Adaptor 1 Connect DC OUT on the AC Adaptor to DC IN on the Digital Camera Station until it locks with a click. 2 Insert the Digital Camera into the Digital Camera Station until it locks. 3 Plug the AC Adaptor into an AC outlet. The POWER Lamp lights up.
10 Adjusting LCD V iewfinder Brightness 1 Set the POWER switch to REC or PLAY. 2 Press OSD repeatedly until the BRIGHT adjustment screen appears. 3 Press (+) or (−) to change the bright- ness of the LCD Viewfinder; (+) for brighter, (−) for darker.
11 On Screen Display (OSD) The indications displayed on the LCD screen will tell you the operation status of the Digital Camera. REC Mode Playback Mode 2, 3 1 10FINE LEFT REC LIGHT Function Status Image Pages left in memory and Image Resolution selected; SF (Super Fine), FINE (Fine), or NOR (Normal).
12 Capturing Images 1 2 3 1 Set the POWER switch to REC. Make sure you slide the POWER switch fully to the REC position. 2 Press MODE to select the image resolution mode; SF (Super Fine)/FINE (Fine) (640X480 pixels), or NOR (Normal) (320X240 pixels).
13 1 Set the POWER switch to REC. 2 Set the NORMAL/MACRO switch to MACRO. 3 Bring the Digital Camera up to the subject [as close as approximately 3.1 inches (8cm) away].
14 Playing Back Captured Images 1 Manual Playback 1 Set the POWER switch to PLAY. 2 Press (+) or (−) repeatedly, [(+) for ascending order, and (−) for descending order ] to change the displayed image on the LCD Viewfinder. • The image page number and resolution mode are displayed at the bottom of the screen.
15 Playing Back Captured Images 1 2, 3 Auto Playback 3 Press (+) or (−) again to cancel Auto Playback mode. • “AUTO PLAY STOP” will be displayed. P20 FINE AUTO PLAY STOP 1 Set the POWER switch to PLAY. 2 Hold down (+) or (−) more than three seconds [(+) for ascending order, and (−) for descending order.
16 T o Delete Specific Images 4 Press DEL to select YES when the image page you want to delete is displayed. • It takes 3 to 6 seconds to delete the image. • Image page numbers are adjusted automatically as images are deleted. • To delete other specific image pages, please repeat steps 2–4.
17 T o Delete All Image Pages 4 Press DEL to select YES in the DELETE ALL menu. • “PLEASE WAIT” will be displayed on screen (approx. 90 seconds) as all images are deleted from memory.
18 V iewing Images on Y our TV Screen 4 1 1 Insert the Digital Camera into the Digital Camera Station until it locks. 2 Connect the Digital Camera Station to your TV using the Video cable (supplied) as shown. 3 Turn on your TV and select its video input mode.
19 4 1 T ransferring Y our Images (VCR) 1 Insert the Digital Camera into the Digital Camera Station until it locks. 2 Connect the Digital Camera Station to your VCR using the Video cable (supplied) as shown. 3 Turn on your VCR and select its line input mode.
20 T ransferring Y our Images (Windows) System Requirements: • IBM PC/AT or compatible. • MS-Windows 3.1 or Windows 95. • 386SX CPU or higher. (486 recom- mended.) • RAM: 8MB on-board memory. • 10MB available hard disk space. • 256 Color monitor or full color recom- mended (24bit per pixel or 16.
21 T ransferring Y our Images (Windows) 4 1 Connection PC Connect- ing Cable for Windows (Supplied) Serial RS-232C (D-Sub 9-pin) 2 3 Running the Application 5 For Windows 95, select Programs/ PalmCam/PalmCam from the Windows 95 Start Menu. For Windows 3.
22 T ransferring Y our Images (Macintosh) System Requirements: • System 7.1 or later. • 68030 CPU or higher, or Power Macintosh. • 4MB of RAM. (8MB recommended.) • 10MB available hard disk space. • 256 Color monitor or full color recom- mended (24bit per pixel or 16.
23 T ransferring Y our Images (Macintosh) Connection Running the Application 5 Double click the PalmCam icon. 6 Please read the Help file to operate the application. Note: • For extended periods of use, it is recommended to use the AC Adaptor for a power source.
24 Digital Camera Accessory System Accessory # Figure Description Price PV-BPN10/1B Battery Pack $24.95 PV-H100 System Soft Case $24.95 (It carries the Digital Camera and all its supplied accessories.) For ordering instructions, see the Accessory Order Form page.
25 Digital Camera Accessory Order Form Please photocopy this form when placing an order. 2. Items Ordered 1. Model # TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF THE FOLLOWING: VI.
26 Before Requesting Service If you have a problem with your Digital Camera, it may be something you can correct yourself. Check the list below for symptoms and corrections. Symptom Correction Cannot charge the Battery Pack. • Make sure the rechargeable Ni-Cd Battery Pack is inserted.
27 Specifications CCD 1/4 inch (6.35 mm) 350,000 Progressive Scan CCD Lens f=5.7 mm (equivalent to a 55 mm lens on a 35 mm still camera.)/F3.8 Focus Fixed Focus with Macro Position Focusing Area Normal: 27.56 inch (0.7m)– ∞ /Macro: 3.15 inch (8cm) (approx) Iris F3.
28 W arranty Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Consumer E.
29 Servicenter Directory As of April ’97 EAST(PCE) 2221 Cabot Boulevard West Suite A Langhorne, PA 19047 Phone (215) 741-0676 Fax (215) 750-6492 Covers: CT, DE, ME, MD, MA, NH, NJ, NY, PA, RI, VT, V.
30 Index A AC Adaptor 2, 5, 7, 9 Accessory (optional) 24, 25 Auto Playback 15 Auto Power Off 12 B Battery Pack 2, 6, 7, 8, 24 Battery Remaining Indication 1 1 Brightness (LCD Viewfinder) 10 C Capturin.
31.
Printed in Japan LSQT0042 C 1997 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave.
An important point after buying a device Panasonic PV-DC1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PV-DC1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PV-DC1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PV-DC1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PV-DC1000 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PV-DC1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PV-DC1000.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PV-DC1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PV-DC1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
