Instruction/ maintenance manual of the product PT-DW730EL Panasonic
Go to page of 108
Thank you for purchasing this Panasonic product. ■ This manual is common to all the models regardless of suffixes of the Model No. z S: Silver model, the standard zoom lens supplied LS: Silver model.
Read this rst! 2 - ENGLISH Important Information Read this rst! Information W ARNING: THIS APP ARA TUS MUST BE EAR THED. W ARNING: T opreventdamagewhichmayresultinreorshockhazard,donotexposethisappliancetorain or moisture.
Read this rst! ENGLISH - 3 Important Information IMPORT ANT : THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY , PLEASE READ THE FOLLOWING TEXT CAREFULL Y . This appliance is supplie d with a moulded three pin mains plu g for your safety and convenience.
Read this rst! 4 - ENGLISH Important Information W ARNING: PO WE R The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately .
Read this rst! ENGLISH - 5 Important Information W ARNING: Do not cover the air inlet port or the air outlet port. Doingsowillcausetheprojectortooverheat,whichcancausereordamagetotheprojector . z Do not place the projector in narrow , badly ventilated places such as closets or bookshelves.
Read this rst! 6 - ENGLISH Important Information CAUTION: PO WE R When disconnecting the power cord, be sure to hold the power plug and power connector . Ifthepowercorditselfispulled,theleadwillbecomedamaged,andre,short-circuitsorseriouselectric shocks will result.
Read this rst! ENGLISH - 7 Important Information CAUTION: O N U S E/ I N ST AL LA T I ON Do not put your weight on this projector . Y ou could fall or the projector could break, and injury will result. z Be especially careful not to let young children stand or sit on the projector .
Read this rst! 8 - ENGLISH Important Information T rademarks • Microsoft ® and its logos, Windows ® , Windows ® XP , Windows Vista ® , Windows ® 7, and Internet Explorer ® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
ENGLISH - 9 Quick Steps Quick Steps For details, see the corresponding pages. 1. Set up your projector . ( page 21) 2. Attach the projection lens. ( page 29) 3. Connect w ith other de vices. ( page 30) 4. C onnect the power cord. ( page 32) 5.
Contents 10 - ENGLISH Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Important Information Re ad th is rst ! ............................................ 2 P rec au ti on s fo r U se................
Contents ENGLISH - 1 1 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix [AU T O S IG NA L] .............................................. 57 [AU T O S ETU P] ..............................................
Precautions for Use 12 - ENGLISH Important Information Precautions for Use Cautions when transporting z Projection lens is susceptible to effects due to vibration or impact. Make sure to remove the lens when transporting. z When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts.
Precautions for Use ENGLISH - 13 Important Information ■ Do not use the projector tilted right or left. Using the projector at a vertical angle that exceeds 15 ° may reduce product life or result in malfunction. ■ When installing and using the projector at an angle that exceeds 30 ° vertically , set [COOLING CONDITION] ( page 62).
Precautions for Use 14 - ENGLISH Important Information Security T ake safety measures against following incidents. z Personal information being leaked via this product z Unauthorized operation of this product by a malicious third party z Interfering or stopping of this product by a malicious third party T ake suf cient security measures.
Precautions for Use ENGLISH - 15 Important Information Cautions on use ■ In order to get the picture quality Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.
Precautions for Use 16 - ENGLISH Important Information Accessories Make sure that the following accessories are provided with your projector . Numbers in the brackets ( ) show the number of accessories.
About Y our Projector ENGLISH - 17 Preparation About Y our Projector Remote control ■ T op (1) Remote control indicator Flashes by pressing any buttons. (2) ST ANDBY ( ) button Sets the projector to the standby mode when the <MAIN POWER> switch on the projector is set to <ON>.
About Y our Projector 18 - ENGLISH Preparation Projector body ■ Front (1) (2) (3) (4) (5) (6) (7) (8) (6) ■ R e a r (9) (10) (11) (12) (1) Power indicator <ST ANDBY (RED)/ON (GREEN)> Displays the status of the power . (2) Lamp indicator <LAMP1> Displays the status of the lamp 1.
About Y our Projector ENGLISH - 19 Preparation ■ Control panel (9) (10) (11) (12) (13) (1) (2) (3) (4) (5) (6) (7) (8) (1) ST ANDBY ( ) button Sets the projector to the standby mode when the <MAIN POWER> switch on the projector is set to <ON>.
Using Remote control 20 - ENGLISH Preparation Using Remote control Inserting and removing the batteries 1) Open the cover . (i) (ii) 2) Insert the batteries and close the cover (insert the side rst). z When remove the batteries, perform the steps in the reverse order .
Setting up ENGLISH - 21 Getting Started Setting up Projection method Y ou can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment.
Setting up 22 - ENGLISH Getting Started Screen size and throw distance Install the projector referring to the following gures and table describing projection distances. Image size and image position can be adjusted in accordance with the screen size and screen position.
Setting up ENGLISH - 23 Getting Started ■ Projection distance per projection lens (for PT -DW730E) z When the screen aspect ratio is 16:10 (unit: m) (All measurements below are approximate and may differ slightly from the actual measurements.
Setting up 24 - ENGLISH Getting Started z When the screen aspect ratio is 4:3 (unit: m) (All measurements below are approximate and may differ slightly from the actual measurements.
Setting up ENGLISH - 25 Getting Started ■ Projection distance per projection lens (for PT -DX800E) z When the screen aspect ratio is 4:3 (unit: m) (All measurements below are approximate and may differ slightly from the actual measurements.
Setting up 26 - ENGLISH Getting Started ■ Projection distance calculation formula per projection lens (for PT -DW730E) Lens type Aspect ratio Projection distance (L) formula Standard zoom lens – 16:10 Min. (L W) L = 1.5669 x SD (m) – 0.0746 Max.
Setting up ENGLISH - 27 Getting Started ■ Projection distance calculation formula per projection lens (for PT -DX800E) Lens type Aspect ratio Projection distance (L) formula Standard zoom lens – 4:3 Min. (L W) L = 1.4567 x SD (m) – 0.0746 Max. (L T) L = 2.
Removing/attaching the projection lens 28 - ENGLISH Getting Started Removing/attaching the projection lens Perform the following steps when removing/attaching the standard zoom lens or the optional lens. Move the lens to the home position before replacing or removing the lens.
Removing/attaching the projection lens ENGLISH - 29 Getting Started Attaching the projection lens 1) Remove the projection lens cover , align the guide of the projection lens to the guide groove on the projector , and then insert the projection lens. Groove Guide Projection lens 2) T urn the projection lens clockwise until it clicks.
Connections 30 - ENGLISH Getting Started Before connecting to the projector z Read carefully the instruction manual for the device to be connected. z T urning off the power switch of the devices before connecting cables.
Connections ENGLISH - 31 Getting Started Connecting example: A V equipment VCR (TBC built-in) DVD player with HDMI terminal (HDCP) or Attention z Always use one of the following when connecting a VCR.
Powering ON/OFF 32 - ENGLISH Basic Operation Powering ON/OFF Connecting the power cord Be sure to insert the supplied power cord securely to its base to prevent it from coming off. Con rm that the <MAIN POWER> switch is at the <OFF> side, before connecting the power cord.
Powering ON/OFF ENGLISH - 33 Basic Operation Power indicator The power indicator informs you of the power status. Check the status of the power indicator <ST ANDBY (RED)/ ON (GREEN)> before operating the projector .
Powering ON/OFF 34 - ENGLISH Basic Operation Powering up the projector When using the optional projection lens, attach the pr oje ct ion l ens b efo re tu rni ng on t he pow er . ( pa ge 29 ) Remove the lens cover beforehand. 1) Connect the power plug to the outlet.
Powering ON/OFF ENGLISH - 35 Basic Operation Powering off the projector 1) Press the ST ANDBY < > button. 2) Press the ◀▶ buttons to select [OK], and press the <ENTER> button.
Projecting 36 - ENGLISH Basic Operation Check the connections of the external devices, attachment of the projection lens ( page 29), and connection of the pow er cord ( page 32 ), and tu rn on the power ( page 34) to start the proje ction.
Projecting ENGLISH - 37 Basic Operation Adjustment range by the lens position shift (optical shift) Perform the lens position shift within the adjustment range. The focus may change when the lens position is shifted out of the adjustment range. This is because the movement of the lens is restricted to protect the optical parts.
Basic operations using the remote control 38 - ENGLISH Basic Operation Basic operations using the remote control Using the SHUTTER function If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image temporarily .
Basic operations using the remote control ENGLISH - 39 Basic Operation Using the automatic setup function The automatic setup function can be used to automatically adjust the resolution, clock phase, .
Basic operations using the remote control 40 - ENGLISH Basic Operation Changing the picture aspect ratio Y ou can toggle through aspect ratios to select the one that is appropriate for the input signal. button Press the <ASPECT> button on the remote control.
Menu Navigation ENGLISH - 41 Settings Menu Navigation Navigating through the menu ■ Operating procedure button 1) Press the <MENU> button on the remote control or the control panel.
Menu Navigation 42 - ENGLISH Settings Note z Y ou cannot reset all the settings to the factory default at a time. z T o reset all the settings adjusted in the sub-menu item to the factory default at a time, perform initialization from the [PROJECTOR SETUP] menu [INITIALIZE] ( page 66).
Menu Navigation ENGLISH - 43 Settings ■ [DISPLA Y LANGUAGE] Details ( page 54) ■ [DISPLA Y OPTION] Sub-menu item Factory default Page [COLOR MA TCHING] [OFF] 55 [COLOR CORRECTION] [OFF] 56 [CO.
[PICTURE] menu 44 - ENGLISH Settings Select [PICTURE] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. z After selecting the item, press ▲▼◀▶ to set.
[PICTURE] menu ENGLISH - 45 Settings [COLOR] Y ou can adjust the color saturation of the projected image. 1) Press ▲▼ to select [COLOR]. 2) Press ◀▶ or the <ENTER> button. z The [COLOR] individual adjustment screen is displayed. 3) Press ◀▶ to adjust the level.
[PICTURE] menu 46 - ENGLISH Settings [WHITE GAIN] Y ou can adjust the brightness of the white part of the projected image. 1) Press ▲▼ to select [WHITE GAIN]. 2) Press ◀▶ or the <ENTER> button. z The [WHITE GAIN] individual adjustment screen is displayed.
[PICTURE] menu ENGLISH - 47 Settings [AI] Y ou can project the optimal image with contrast by controlling the gradation in accordance with the image. 1) Press ▲▼ to select [AI]. 2) Press ◀▶ or the <ENTER> button. z The [AI] individual adjustment screen is displayed.
[POSITION] menu 48 - ENGLISH Settings Select [POSITION] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. z After selecting the item, press ▲▼◀▶ to set.
[POSITION] menu ENGLISH - 49 Settings ■ [16 : 9] When standard signals *1 are input, the pictures are displayed with the aspect ratio converted to 16:9. When wide-screen signals *2 are input, the pictures are displayed without changing the aspect ratio.
[POSITION] menu 50 - ENGLISH Settings [CLOCK PHASE] Y ou can adjust to achieve an optimal image when there is a ickering image or smeared outlines. 1) Press ▲▼ to select [CLOCK PHASE]. 2) Press ◀▶ or the <ENTER> button. z The [CLOCK PHASE] individual adjustment screen is displayed.
[ADV ANCED MENU] ENGLISH - 51 Settings Select [ADV ANCED MENU] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. z After selecting the item, press ▲▼◀▶ to set.
[ADV ANCED MENU] 52 - ENGLISH Settings [INPUT RESOLUTION] Y ou can adjust to achieve an optimal image when there is a ickering image or smeared outlines. 1) Press ▲▼ to select [INPUT RESOLUTION]. 2) Press the <ENTER> button. z The [INPUT RESOLUTION] screen is displayed.
[ADV ANCED MENU] ENGLISH - 53 Settings 8) Press ◀▶ to switch [ON]. z A marker for image position adjustment is displayed. The green line is the start point of edge blending adjusted with [ST AR T] in Step 6) . The red line is the edge blending end point adjusted with [WIDTH] in Step 6) .
[DISPLA Y LANGUAGE] menu 54 - ENGLISH Settings Select [DISPLA Y LANGUAGE] from the main menu, and display the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. z Press ▲▼ to select the language, and press the <ENTER> button to set.
[DISPLA Y OPTION] menu ENGLISH - 55 Settings Select [DISPLA Y OPTION] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) r ega rd in g the o pe ra ti on of t he m enu screen. z After selecting the item, press ▲▼◀▶ to set.
[DISPLA Y OPTION] menu 56 - ENGLISH Settings ■ Adjusting the color matching using a colorimeter [RED], [GREEN], [BLUE], [CY AN], [MAGENT A], [YELLOW], and [WHITE] can be set to preferred colors using the colorimeter that can measure the chromaticity coordinates and luminance.
[DISPLA Y OPTION] menu ENGLISH - 57 Settings [SCREEN SETTING] Y ou can set the screen size. Y ou can correct to the optimal image position matching to the set screen when the aspect ratio of the projected image is changed. Set in accordance with the screen used.
[DISPLA Y OPTION] menu 58 - ENGLISH Settings ■ When selecting [DEF AUL T] or [WIDE] in Step 3) 4) Press the <ENTER> button. z Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When the adjustment is complete, the system returns to the [AUTO SETUP] screen.
[DISPLA Y OPTION] menu ENGLISH - 59 Settings ■ [OSD DESIGN] Y ou can set the color of the menu screen (OSD). z The setting will change as follows each time you press the button. [1]: Y ellow [2]: Blue [6]: Brown [3]: White [5]: Pink [4]: Green ■ [OSD MEMOR Y] Y ou can be set whether to maintain the cursor position of the menu screen (OSD).
[DISPLA Y OPTION] menu 60 - ENGLISH Settings [ST ARTUP LOGO] Y ou can set the logo display when the power is turned on. 1) Press ▲▼ to select [ST ARTUP LOGO]. 2) Press ◀▶ t o swit ch [ST ARTUP LOGO]. z The setting will change as follows each time you press the button.
[PROJECT OR SETUP] menu ENGLISH - 61 Settings [PROJECT OR SETUP] menu Select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen.
[PROJECT OR SETUP] menu 62 - ENGLISH Settings 3) When the con rmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note z The speed of the fan is raised and the operation sound will become louder when this is set to [ON].
[PROJECT OR SETUP] menu ENGLISH - 63 Settings [LAMP RELA Y] The degradation of the lamp due to continuous usage can be reduced by automatically switching the lamp to be turned on when using the projector continuously for 22 hours or more. 1) Press ▲▼ to select [LAMP RELA Y].
[PROJECT OR SETUP] menu 64 - ENGLISH Settings [REMOTE2 MODE] Y ou can set the <REMOTE 2 IN> terminal. 1) Press ▲▼ to select [REMO TE2 MODE]. 2) Press ◀▶ to switch [REMOTE2 MODE]. z The setting will change as follows each time you press the button.
[PROJECT OR SETUP] menu ENGLISH - 65 Settings [NO SIGNAL SHUT -OFF] Y ou can set the power of the projector automatically to standby if there is no input signal by the speci ed time. 1) Press ▲▼ to se lect [N O SIGNAL SHUT - OFF]. 2) Press ◀▶ to switch [NO SIGNAL SHUT -OFF].
[PROJECT OR SETUP] menu 66 - ENGLISH Settings [LOAD ALL USER DA T A] Y ou can load the various setting values saved as a backup in the built-in memory of the projector . 1) Press ▲▼ to select [LOAD ALL USER DA T A]. 2) Press the <ENTER> button.
[TEST P A TTERN] menu ENGLISH - 67 Settings [TEST P A TTERN] menu Select [TEST P A TTERN] from the main menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. z Press ◀▶ to switch.
[SIGNAL LIST] menu 68 - ENGLISH Settings Select [SIGNAL LIST] from the main menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. ■ Registered signal status z The name can be set for each sub memory ( page 69).
[SIGNAL LIST] menu ENGLISH - 69 Settings Managing the sub memory list The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source.
[SECURITY] menu 70 - ENGLISH Settings [SECURITY] menu Select [SECURITY] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen.
[SECURITY] menu ENGLISH - 71 Settings Note z The logo is displayed on the whole screen in the normal projection condition when [DEF AUL T LOGO] is set. Since the menu screen is displayed, it is not possible to see the whole image even if the logo display is canceled by pressing the <MENU> button.
[SECURITY] menu 72 - ENGLISH Settings ■ [REMOTE CONTROLLER] z Y ou can set the limitation on the control from the remote control. [ENABLE] Enables the button operation from the remote control. [DISABLE] Disables the button operation from the remote control.
[NETWORK] menu ENGLISH - 73 Settings [NETWORK] menu Select [NETWORK] from the main menu, and select the item from the sub-menu. Refer to “ Navigating through the menu ” ( pa ge 4 1) re ga rd in g the o pe ra ti on of t he me nu screen. z After selecting the item, press ▲▼◀▶ to set.
[NETWORK] menu 74 - ENGLISH Settings Network connections The projector has a network function, and the following operations are available from the computer using the Web browser control.
[NETWORK] menu ENGLISH - 75 Settings Accessing from the W eb browser 1) Start up the Web browser on the computer . 2) Enter the IP address set on the projector into the URL entry eld of the W eb browser .
[NETWORK] menu 76 - ENGLISH Settings ■ Item description (1) (2) (3) (4) (5) (1) Page switch tab Click the tab to switch between pages. (2) [Status] The status of the projector is displayed by clicking this item. (3) [Projector control] The [Projector control] page is displayed by clicking this item.
[NETWORK] menu ENGLISH - 77 Settings ■ Error information page When [Error (Detail)] is displayed on the [Projector status] screen, click it to display the error details. z The projector may go into the standby status to protect the projector depending on the contents of the error .
[NETWORK] menu 78 - ENGLISH Settings ■ [Network status] page Click [Status] [Network status]. The current network setting status is displayed. ■ [Access error log] page Click [Status] [Access error log].
[NETWORK] menu ENGLISH - 79 Settings ■ [Basic control] page Click [Projector control] [Basic control]. (1) (2) (3) (4) (6) (5) (1) [POWER] ([ON]/[ST ANDBY]) Switches between on/off of the power . (2) [SHUTTER] ([ON]/[OFF]) Switches between use or not use of the shutter function.
[NETWORK] menu 80 - ENGLISH Settings ■ [Network con g] page Click [Detailed set up] [Network con g]. z The [CAUTION!] screen is displayed by clicking [Network con g]. z The current settings are displayed by pressing the [Next] button.
[NETWORK] menu ENGLISH - 81 Settings ■ [Ping test] page Y ou can check whether the network is connected to the E-mail server , POP server , DNS server , etc. Click [Detailed set up] [Ping test]. (1) (2) (3) (4) (1) [Input IP address] Enter the IP address of the server to be tested.
[NETWORK] menu 82 - ENGLISH Settings ■ [E-mail set up] page An E-mail message can be sent to the E-mail address setup in advance (up to two addresses) when the problem occurred or the usage time of the lamp reached the speci ed value. Click [Detailed set up] [E-mail set up].
[NETWORK] menu ENGLISH - 83 Settings ■ [E-mail set up] page (continued) (1) (2) (3) (1) [E-MAIL ADDRESS 2] Enter the E-mail address to be sent when two E-mail addresses are to be used.
[NETWORK] menu 84 - ENGLISH Settings ■ [Authentication set up] page Y ou can set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail message.
[NETWORK] menu ENGLISH - 85 Settings ■ Contents of mail sent z Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. z Example of the E-mail sent for an error The following E-mail is sent when an error has occurred.
[NETWORK] menu 86 - ENGLISH Settings ■ [Change password] page Click [Change password]. (1) (2) (3) (1) [Administrator] Select this when you change the [Administrator] setting. (2) [User] Select this when the [User] setting. (3) [Next] Displays the screen to change the password setting.
LAMP/TEMP/FIL TER Indicators ENGLISH - 87 Maintenance LAMP/TEMP/FIL TER Indicators Managing the indicated problems If a problem should occur inside the projector , the lamp indicators <LAMP1>/<LAMP2>, the temperature indicator <TEMP>, and the lter indicator <FIL TER> will inform you.
LAMP/TEMP/FIL TER Indicators 88 - ENGLISH Maintenance ■ T emperature indicator <TEMP> Lamp indication Lighting in red Blinking in red (once) Blinking in red (3 times) Status W arm-up status Internal temperature is high. (W ARNING) Internal temperature is high.
Maintenance/Replacement ENGLISH - 89 Maintenance Maintenance/Replacement Before maintaining/replacing the unit z Make sure to turn off the power before maintaining or replacing the unit. （ pages 32, 35) z When turning off the power , make sure to follow the procedures in “Powering off the projector” ( page 35).
Maintenance/Replacement 90 - ENGLISH Maintenance 4) Attach the air lter unit to the projector . z The air l ter u nit ha s ver tical disti nction s.
Maintenance/Replacement ENGLISH - 91 Maintenance ■ Lamp unit The lamp unit is a consumable component. Check the usage duration in the [PROJECTOR SETUP] menu [ST A TUS] ( page 64) and perform regular replacement. It is recommended that you request a quali ed technician to replace the lamp unit.
Maintenance/Replacement 92 - ENGLISH Maintenance ■ Replacing the lamp unit Attention z When the projector is mounted on the ceiling, do not put your face near the lamp unit. z Securely attach the lamp unit and lamp unit cover . z If the lamp unit is not installed properly , remove it and then install it again.
T roubleshooting ENGLISH - 93 Maintenance T roubleshooting Review the following points. For details, see the corresponding pages. Problems Points to be checked Reference page Power does not turn on.
T roubleshooting 94 - ENGLISH Maintenance Problems Points to be checked Reference page Picture from a computer does not appear . z Is the cable too long? (Use a cable that is 10 m or shorter .
T echnical Information ENGLISH - 95 Appendix PJLink protocol The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer .
T echnical Information 96 - ENGLISH Appendix Control commands via LAN ■ When WEB Control administrator rights password is set (Protect mode) z Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector .
T echnical Information ENGLISH - 97 Appendix ■ When WEB Control administrator rights password is not set (Non-protect mode) z Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector .
T echnical Information 98 - ENGLISH Appendix Serial terminal The <SERIAL IN>/<SERIAL OUT> terminals on the side of the projector conform with RS-232C so that the projector can be connected to and controlled from a computer .
T echnical Information ENGLISH - 99 Appendix ■ Basic format T ransmission from the computer starts with STX, then the ID, command, parameter , and ETX are sent in this order .
T echnical Information 100 - ENGLISH Appendix REMOTE 2 IN terminal It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control signals cannot reach. Use the <REMOTE 2 IN> terminal on the side of the projector to connect to the control panel.
T echnical Information ENGLISH - 101 Appendix T wo window display combination list (PT -DW730E only) Input A Input B RGB1 Still image RGB1 Movie RGB2 Still image RGB2 Movie VIDEO S-VIDEO DVI Still ima.
T echnical Information 102 - ENGLISH Appendix List of compatible signals The following table speci es the types of signals compatible with the projectors. Mode Resolution (Dots) Scanning frequency Dot clock frequency (MHz) Picture quality *3 Plug and play *6 Format *7 Horizontal (kHz) V ertical (Hz) RGB2 DVI-D EDID1 DVI-D EDID2 NTSC/NTSC4.
T echnical Information ENGLISH - 103 Appendix Mode Resolution (Dots) Scanning frequency Dot clock frequency (MHz) Picture quality *3 Plug and play *6 Format *7 Horizontal (kHz) V ertical (Hz) RGB2 DVI-D EDID1 DVI-D EDID2 MXGA 1 152 x 864 64.0 71.2 94.
Speci cations 104 - ENGLISH Appendix The following table describes the speci cations of the projector . Model No. PT -DW730E PT -DW730EL PT -DX800E PT -DX800EL Power supply AC 220 V - 240 V 50 Hz/60 Hz Power consumption 760 W (When [ST ANDBY MODE] is set to [ECO]: 0.
Speci cations ENGLISH - 105 Appendix Model No. PT -DW730E PT -DW730EL PT -DX800E PT -DX800EL T erminals RGB2 IN 1 set, high-density D-Sub 15 p (female) [RGB SIGNAL] 0.
Dimensions 106 - ENGLISH Appendix Dimensions z When installing the projector to a ceiling, be sure to use the speci ed ceiling mount bracket (ET -PKD56H: for high ceilings, ET -PKD55S: for low ceilings). z When installing the projector , attach the drop-prevention kit supplied with the ceiling mount bracket to the projector .
Index ENGLISH - 107 Appendix Index A Accessories ……………………………………… 16 AC IN terminal ……………………………… 18, 32 Adjustable feet ……………………….
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
An important point after buying a device Panasonic PT-DW730EL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PT-DW730EL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PT-DW730EL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PT-DW730EL you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PT-DW730EL will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PT-DW730EL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PT-DW730EL.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PT-DW730EL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PT-DW730EL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
