Instruction/ maintenance manual of the product PCF2 Panasonic
Go to page of 5
MODEL: Miniature Camera PCF2, PCV2, PCF6, PCV6, PCF6W, PCV6W PRODUCT INSTRUCTIONS STANDARD INSTALLATION PROCEDURE CONTENTS INCLUDE: (1) Dome base (1) Dome (1) Dome liner (1) Camera swivel plate (1) Ca.
- 2 - DOME REPLACEMENT 1. Rotate the liner inside the dome, so that when the dome is secured to the base, the camera lens is in the center of the viewing slot of the liner . NOTE : It may be helpful to install the dome without the liner the first time.
- 3 - 6.0" 5.0" 1.0" 5.0" Dia. 6.0" Dia. PCF2, PCV2 Dimensions CAUTION: T o prevent fire or shock hazard, the UL-Listed wire VW-1, style 1007, should be used for the cable for 24 V AC input terminals. Wiring Chart-Cable Distance This Chart is based on a 12VDC power supply with the maximum Amp draw at .
- 4 - STANDARD INSTALLATION PROCEDURE, MV6W CONTENTS INCLUDE: (1) Wall mount Bracket (1) Dome base (1) Dome (1) Dome liner (1) Camera swivel plate (1) Camera mount with camera, lens, and PC Board (1) Camera adjustment arm (1) Camera adjustment template (2) 4-40 x 1/4" screws (1) 8-32 x 3/8" screw INSTALLATION 1 .
- 5 - SAFETY PRECAUTIONS IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference.
An important point after buying a device Panasonic PCF2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic PCF2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic PCF2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic PCF2 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic PCF2 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic PCF2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic PCF2.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic PCF2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic PCF2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
