Instruction/ maintenance manual of the product KX-TCD430AL Panasonic
Go to page of 32
This unit is Caller ID compatib le. To display the caller’s phone number, you must subscrib e to Caller ID service. Charge the batteries for about 7 hours before initial use. Please read these Operating Instructions be fore using the unit and save them for future reference.
2 Table of Contents Preparation Accessory information . . . . . . . . . . . . . . . 3 Important information . . . . . . . . . . . . . . . . 4 Location of controls . . . . . . . . . . . . . . . . . 7 Connections . . . . . . . . . . . . . . . . . . . . .
3 Preparation Preparat ion Accessory information Thank you for pu rchasing a ne w Panasonic di gital cordless phone. Dear Purchaser, You have acquired a product made in co mp liance with the digital enhanced cordless telecommunications (DECT) standard.
4 Preparation Important information General L Use only the power supply included with this product, noted on page 3. L Do not connect the AC adaptor to any AC outlet other than a standard 220–240 V AC outlet. L This product is u nable to make cal ls when: − The portable handset batteries need recharging or have failed.
5 Preparation Instructions to custo mer Installation Attached to this telephone is an approval label. Th is label is evi dence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.
6 Preparation If you are satisfied with the operation of your telephone service after pl ugging in your Permitted Attachment, your installation is completed.
7 Preparation Location of controls Handset A Receiver B Display C {k} (Phonebo ok) D {C} (T alk) E Navigator L{e}{v} : To search for the desired item in the setting menu, caller information or phoneboo k. L{>} : To select the desired item or move the cursor to the right.
8 Preparation Connections Note: L If the handset is no t charged, you canno t make or answer calls. L Never install te lephone wiring du ring a lightning storm. L The AC adaptor must remain connected at all times. (It is normal for the adap tor to feel warm during use.
9 Preparation 0 5 4 flashes. Note: L If the handset is turn ed off, it will be turned on automatically whe n it is placed on the base unit. Battery life After your Panasonic batteries are fully charge.
10 Preparation Wall mounting Note: L Make sure the screws are securely fastened to the wall. L Use the following wall te mplate to position the screws before drilli ng. Setting the time and date Important: L Confirm that the AC adapto r is connected .
11 Telephone Telephone Making calls 1 Lift the handset and dial the phone number. L To correct a digit, press { C } , then enter the correct number. 2 Press {C} . 3 When finished talking, press {ih} or place the handset on the base uni t. To adjust the receiver volume You can select the desi red receiver volume from level 1 to 3.
12 Telephone displayed. To turn off key lock, press {j} for about 2 seconds. Note: L Emergency calls cannot be ma de until key lock is turned off. L Key lock is turned off when the handset is turned off. R button (to use the recall featur e) { R } is used to access optional telephone services.
13 Telephone Phonebook Storing phone numbers and names Up to 20 phone numbers can be stored in the phonebook for quick access. 1 Press {j} 2 times. 2 Enter a phone number (24 digits max.). L Each number stored in the phoneboo k will be given an i ndex number (01–20).
14 Telephone Making calls using the phonebook Before using this feature, store the desire d phone numbers and names into the phonebook (page 13). 1 Press {k} .
15 Telephone Caller ID service Important: L This unit is Caller ID compatible. To display the calle r’s phone number, yo u must subscribe to Call er ID service. After subscribing to Caller ID, this unit will display caller information. How Caller ID is displayed The unit will display the calli ng party’s phone number after the first ring.
16 Telephone Example: *1 Shown when this call has alre ady been viewed or answered. 3 Press {C} to call back the displayed party. Note: L When no calls have been received , the display will show “ NO ITEM ”. Editing a caller’s phone number before calling back 1 Press {e} or {v} repeatedly to display the desired entry, then press {>} .
17 Useful Telephone Settings Useful T eleph one Settin gs Guide to handset settings For your reference, a chart of all items which can be c ustomis ed for the handset is printed below. Details of each item can be found on the corresponding page s. To enter the 2nd menu, first press {>} .
18 Useful Telephone Settings Handset settings Time alarm An alarm will sound for 3 minutes at the set time once or daily. “ ONCE ”: The alarm will ring only once. “ REPEAT DAILY ”: The alarm will ring at the set time ev eryday. “ OFF ”: Turns this feature off.
19 Useful Telephone Settings 4 Press {v} repeatedly to display the desired item, then press {>} . 5 Press {v} repeatedly to select the desired setting from “ RING TYPE 1 ” to “ RING TYPE 20 ”, then press {>} .
20 Useful Telephone Settings 2 Press {v} repeatedly to display “ SETTING HS ”, then press {>} . 3 Press {v} repeatedly to display “ DISPLAY OPT ”, then press {>} . 4 Press {v} repeatedly to display “ TALK MODE ”, then press {>} . 5 Press {v} repeatedly to select the desired setting, then press {>} .
21 Useful Telephone Settings 3 Press {v} repeatedly to display “ CALL OPT ”, then press {>} . 4 Press {v} repeatedly to display “ SET DIRECT ”, then press {>} . 5 Press {v} repeatedly to select “ ON ” or “ OFF ”, then press {>} .
22 Useful Telephone Settings Guide to base unit settings For your reference, a chart of all items whi ch can be cust omised f or the bas e unit is printed below. Details of each item can be found on the corresponding pages. *1 If you cancel a hand set, the base unit will “forget” the handset registration.
23 Useful Telephone Settings 7 Select the desired setting by pressing { 1 } for 700 ms or { 2 } for 100 ms. 8 Press {>} , then press {ih} . Setting pause length 1 Press {j} . 2 Press {v} repeatedly to display “ SETTING BS ”, then press {>} .
24 Useful Telephone Settings 6 Press { C } . 7 Press {>} , then press {ih} . Storing emergency numbers This feature determines which phone numbers may be dialled whil e the call bar feature is turned on. A total of 4 emerge ncy numbers (memory locati ons 1–4) can be stored.
25 Multi-unit Operation Multi-unit Operation Operating additional units Additional handsets Up to 6 handsets can be registered to a single base unit. Additional handsets will give you the freedom to , for example, have an intercom call with another handset whi le a third handset is on an outside call.
26 Multi-unit Operation L If you changed PIN, e nter it (page 22). 8 Press {>} . L When the handset has been registered successfully, a confirmation tone will sound, and w will stop flashing. Note: L If all registered handsets start ri nging in step 5, press {x} to stop, then start again from step 1.
27 Multi-unit Operation Setting all or selected handsets to ring You can select one of 3 methods to determine how the handsets ri ng for incoming calls. − “ 1 ”: All handsets will ring. − “ 2 ”: Selected handset(s) will ring. − “ 3 ”: Selected handset(s) will ring, then all handsets will ring.
28 Multi-unit Operation Intercom between handsets You can make i ntercom calls between 2 handsets in the same radio cell. Example: When handset 1 cal ls handset 2 1 Handset 1: Press { INT } and { 2 } (desired handset number). 2 Handset 2: Press {C} to answer.
29 Useful Information Useful Infor mation Troubleshooting If you still have difficulties a fter following the instructions in this se ction, disconne ct the AC adaptor and turn of f the handset, then reconnect the AC ad aptor and turn on the handset. 0w4 is flashing.
30 Useful Information redialled. Redial the number manually. The handset beeps intermittently and/or 0 7 4 flashes. L Fully charge the b atteries (page 8). I fully charged the batteries, but 0 7 4 still flashes. L Clean the charge contacts and charge again (page 8).
31 Index Index Index A Additional base units: 25 Additional handsets: 25 All handsets to ring: 27 Selected handsets to ring: 27 Answering calls: 12 Auto talk: 12 B Base unit Cancelling: 26 Guide to se.
For your future reference Attach or keep original receipt to assist with any repair under warranty. Note: L In the event of pro blems, you shoul d contact y our equipment supplier in the first instance.
An important point after buying a device Panasonic KX-TCD430AL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic KX-TCD430AL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic KX-TCD430AL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic KX-TCD430AL you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic KX-TCD430AL will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic KX-TCD430AL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic KX-TCD430AL.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic KX-TCD430AL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic KX-TCD430AL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
