Instruction/ maintenance manual of the product KX-TC2000ALF Panasonic
Go to page of 8
PLEASE READ BEFORE USE AND SA VE. Cordless Phone Operating Instructions Model No. KX-TC2000ALB KX-TC2000ALF/KX-TC2000ALS KX-TC2000AL W/KX-TC2000NZB KX-TC2000NZF/KX-TC2000NZW Charge the battery for about 15 hours before initial use.
1-C Settings 1-A Accessories 1-B Location of Controls Handset Base unit Handset Hook (6-C) Charge Contacts (6-A) IN USE/CHARGE Indicator (1-C, 5-A) Antenna (1-C) (HANDSET!LOCATOR) Button (5-A) ABC 2 1.
(TALK) and Indicator (CH) (LOUD) (REDIAL) To redial the last number dialled Press (TALK) (REDIAL) . To select the handset receiver volume Press (LOUD) while talking. • Each time you press the button, the volume level will change from LOW (preset) to HIGH.
You can store up to 10 phone numbers. The dialling buttons ( (0) to (9) ) function as memory stations. The TALK indicator light must be off before programming. TALK Indicator Memory Station Numbers (AUTO) (PAUSE) (PROGRAM) If you misdial Press (PROGRAM) to end storing.
Memory Station Numbers (AUTO) (TALK) and Indicator 1 Press (TALK) . • The TALK indicator lights. 2 Press (AUTO) . • The TALK indicator flashes. 3 Press the memory station number ( (0) to (9) ). • The stored number is dialled. (DIRECT) (TALK) and Indicator 1 Press (TALK) .
(AUTO) (RECALL) (PAUSE) (PROGRAM) (TALK) and Indicator IN USE/CHARGE Indicator (HANDSET!LOCATOR) 5-A Handset Locator You can locate the handset or page the handset user with beep tones. 1 Press (HANDSET!LOCATOR) on the base unit. • The IN USE/CHARGE indicator flashes and the handset beeps for 1 minute.
6-A Battery Recharge When the RECHARGE indicator flashes or the unit beeps intermittently, place the handset on the base unit for about 15 hours to recharge the battery. 6-B Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio waves.
6-E Safety Instructions Take special care to follow the safety suggestions listed below. 6-D T roubleshooting Problem The unit does not work. An alarm tone sounds when you press (TALK) . Static, sound cuts in/out, fades. Interference from other electrical units.
An important point after buying a device Panasonic KX-TC2000ALF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic KX-TC2000ALF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic KX-TC2000ALF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic KX-TC2000ALF you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic KX-TC2000ALF will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic KX-TC2000ALF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic KX-TC2000ALF.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic KX-TC2000ALF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic KX-TC2000ALF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
