Instruction/ maintenance manual of the product KX-TC1486 Panasonic
Go to page of 44
The unit is Caller ID compatible. To display the caller’s name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico Charge the battery for 15 hours before initial use.
∑ Handset Cover (p. 8) Order No. PQYNTC1486B one Accessories (included) For extra orders, call 1-800-332-5368. For hearing or speech impaired TTY users, call 1-866-605-1277. ∑ AC Adaptor (p. 7) Order No. PQWATC1461M1 one ∑ Telephone Line Cord (p.
For assistance, please call: 1-800-211-PANA(7262) For Best Performance 3 Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for 15 hours before initial use (p.
Advanced Operation Phone Book ............................ 20 Storing Names and Numbers ............................... 20 Finding Stored Items .............. 22 Dialing .................................... 22 Editing .................................
Location of Controls “ 5 Preparation For assistance, please call: 1-800-211-PANA(7262) Base unit Charge Contacts (p. 9) IN USE/CHARGE Indicator (p. 8, 25) [HANDSET LOCATOR] (p.
“ Location of Controls 6 Handset Antenna [P A USE/REDIAL] (p . 11, 26) Charge Contacts (p . 9) [ /FLASH] (p. 11, 12, 26) [A UT O/PROGRAM] (p . 18, 20, 22) [MUTE/CLEAR] (p . 12, 19, 24) [OFF] (p . 11, 15) RINGER Selector (p . 9) [ ] (T ONE) (p. 25) [CH/FUNCTION] (Channel) (p .
Settings “ 7 Preparation For assistance, please call: 1-800-211-PANA(7262) Connections.
“ Settings 8 Battery Charge Place the handset on the base unit and charge for 15 hours before initial use. ≥ The IN USE/CHARGE indicator lights and a beep sounds. OR IN USE/CHARGE Indicator Installing the Battery in the Handset Install the battery and close the handset cover, locking it into place.
9 Preparation For assistance, please call: 1-800-211-PANA(7262) Battery information After your Panasonic battery is fully charged, you can expect the following performance: ≥ A fully charged battery.
Programmable Functions 10 Display Language You can select ENGLISH, SPANISH or FRENCH as the display language. Your phone comes from the factory set to ENGLISH. If you want to select the other language, program as follows: 1 Press [CH/FUNCTION] . ≥ The current setting is displayed.
Making Calls “ 11 Basic Operation For assistance, please call: 1-800-211-PANA(7262) 1 Press . ≥ After a few seconds, the display will show the receiver volume. 2 Dial a telephone number. ≥ The dialed number is displayed. 3 To hang up, press [OFF] or place the handset on the base unit.
To select the receiver volume Press or while talking. ≥ Each time you press or , the volume level will change by 4 levels. [ ] [ ] [ ] [ ] Answering Calls “ Making calls 12 When a call is received, the handset rings and the IN USE/CHARGE indicator on the base unit flashes quickly.
For assistance, please call: 1-800-211-PANA(7262) 13 Basic Operation The display shows the caller ’ s name, phone number and the date and time received after the fi rst ring.
“ Caller ID Service 14 To check the number of new calls If you have received 10 new calls, the display will show the following: NEW CALL 10 ≥ Caller information cannot be displayed in the following cases: ≥ — If the caller dialed from an area which does not provide a Caller ID service, the display will show “ OUT OF AREA ” .
Using the Caller List “ 15 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Viewing the Caller List To check who has called, follow the steps below. Make sure the unit is in the standby mode. 1 Lift the handset off the base unit and press or to enter the Caller List.
“ Using the Caller List 16 Ex. When you search from the most recent call: Lift the handset off the base unit and press . [ ] ≥ If there is no name information for a caller, the display will only show the phone number. To return to the previous caller, press .
17 Basic Operation For assistance, please call: 1-800-211-PANA(7262) “ Editing the Caller ’ s Phone Number The unit can edit a phone number into one of 3 patterns. Make sure the unit is in the standby mode. 1 Lift the handset off the base unit and press or to enter the Caller List.
“ Using the Caller List 18 Storing Caller Information in the Phone Book You can store numbers that are in the Caller List in the phone book. Make sure the unit is in the standby mode. 1 Lift the handset off the base unit and press or to enter the Caller List.
19 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Erasing Caller Information After checking the Caller List, you can erase some or all of the entries. Make sure the unit is in the standby mode. To erase a speci fi c caller from the Caller List 1 Lift the handset off the base unit and press or to enter the Caller List.
Phone Book 20 You can store up to 10 names and phone numbers in the phone book. Using the phone book, you can make a call by selecting a name on the handset display. Storing Names and Numbers Make sure the unit is in the standby mode. 1 Press [AUTO/PROGRAM] .
For assistance, please call: 1-800-211-PANA(7262) “ 21 Advanced Operation For example, to enter “TOM”: 1 Press [8] . 2 Press [6] three times, then wait for 3 seconds. 3 Press [6] . ≥ If you enter a blank, press [1] . ≥ To show the cursor, press after entering a character.
Finding Stored Items Make sure the unit is in the standby mode. 1 Press [AUTO/PROGRAM] . 2 Press or . ≥ The first item or last item is displayed. 3 Scroll to the desired item by using or . ≥ You can find the items using the memory station numbers ( [0] to [9] ) directly in step 2.
“ 23 Advanced Operation For assistance, please call: 1-800-211-PANA(7262) Editing Make sure the unit is in the standby mode. 1 Press [AUTO/PROGRAM] . 2 Press or . ≥ The first item or last item is displayed. 3 Scroll to the phone book item you want to change by using or , and press [EDIT] .
“ Phone Book 24 Erasing Make sure the unit is in the standby mode. To erase a speci fi c caller from the Phone book 1 Press [AUTO/PROGRAM] . 2 Press or . ≥ The first item or last item is displayed. 3 Scroll to the phone book item you want to erase by using or .
Special Features “ 25 Advanced Operation For assistance, please call: 1-800-211-PANA(7262) Handset Locator You can locate the handset or page the handset user with beep tones from the base unit. 1 Press [HANDSET LOCATOR] . ≥ The IN USE/CHARGE indicator flashes.
Call Waiting Caller ID display If you subscribe to both Caller ID and Call Waiting with Caller ID services (CWID), when a second call is received while talking, the second caller ’ s information will be displayed.
For assistance, please call: 1-800-211-PANA(7262) 27 Useful Information Belt Clip You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Headset Jack When an optional headset is connected to the handset, make sure to use the headset to talk with the caller.
28 Wall Mounting This unit can be mounted on a wall phone plate. 1 Push the lower side of the hook ( 1 ) and pull down the hook until it locks ( 2 ), so the tab holds the handset . 3 Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow ( 1 and 2 ).
29 Useful Information For assistance, please call: 1-800-211-PANA(7262) 5 To charge the battery: Fit the handset hole in the tab ( 1 ) and fi x the charge contacts ( 2 ). ≥ Make sure to place the handset with the keypad facing down. ≥ The IN USE/CHARGE indicator lights.
30 If “ RECHARGE ” and “” are displayed after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic PQWBTC1461M (P-P504) battery.
Troubleshooting “ 31 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem The unit does not work. An alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset does not ring. The handset display is blank.
32 “ Troubleshooting Problem You cannot store a name and phone number in the phone book. While programming or searching, the handset starts to ring and stops the program/search. The handset does not display the caller ’ s name and/or phone number.
33 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem You cannot redial by pressing [PAUSE/REDIAL] . “ RECHARGE ” and “” are displayed or the handset beeps intermittently. While talking, the call is disconnected. You charged the battery fully, but “ RECHARGE ” and “” are still displayed.
34 Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit.
For assistance, please call: 1-800-211-PANA(7262) 35 Useful Information CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re.
36 FCC and Other Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identi fi er in the format US:AAA-----.
37 Useful Information For assistance, please call: 1-800-211-PANA(7262) “ WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and brie fl y explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings.
“ FCC and Other Information 38 ≥ Environment — do not place the unit in a room where the temperature is less than 5 o C (41 o F) or greater than 40 o C (104 o F). Allow 10 cm (4 q ) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
39 Useful Information For assistance, please call: 1-800-211-PANA(7262) Specifications ∫ Base Unit Power Supply: AC Adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 3.1 W Maximum: Approx. 4 W Frequency: 902.1 MHz – 904.05 MHz Dimensions (H k k W k k D): Approx.
40 Index A Accessories .................................. 2 Answering calls ........................... 12 Automatic Security Code Setting ...................................... 25 B Backlit LCD ................................. 12 Base Unit location .
41 ✄ P ANASONIC CONSUMER ELECTRONICS COMP ANY , DIVISION OF MA TSUSHIT A ELECTRIC CORPORA TION OF AMERICA One P anasonic W ay Secaucus, New Jerse y 07094 P ANASONIC SALES COMP ANY , DIVISION OF MA TSUSHIT A ELECTRIC OF PUERT O RICO , INC., A ve . 65 de Infanteria, Km.
42 Some states do not allow the e xclusion or limitation of incidental or consequential damages, or limitations on how long an implied warr anty lasts, so the exclusions ma y not apply to you. This Limited Warranty giv es you specific legal rights and you ma y also have other rights which vary from state to state.
43 For product service ≥ Visit our website at: http://www.panasonic.com/support ≥ Contact us via the web at: http://www.panasonic.com/contactinfo ≥ Call us at: 1-800-211-PANA(7262) or 1-800-833-9626 When you ship the product ≥ Carefully pack your unit, preferably in the original carton.
PQQX14062ZA F1203-0 D Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanter í a, Km.
An important point after buying a device Panasonic KX-TC1486 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic KX-TC1486 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic KX-TC1486 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic KX-TC1486 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic KX-TC1486 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic KX-TC1486, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic KX-TC1486.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic KX-TC1486. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic KX-TC1486 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
