Instruction/ maintenance manual of the product HDC-SDT750PP Panasonic
Go to page of 176
until 2010/9/16 For USA and Puerto Rico assistance, please call: 1-800-21 1-P ANA(7262) or , contact us via the web at: http://www .panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www .panasonic.ca Operating Instructions High Definit ion V ideo Camera Model N o.
2 VQT3B1 8 Things Y ou Should Know Thank you for choosing Pan asonic! Y ou hav e purc hased one of th e most sophistic ated and reliable pr oducts o n the market to day . Used properl y , we’re sure it will bring you a nd your family years of enjo yment.
3 VQT3B18 THE F OLLO WING APPL IES ON L Y IN T HE U.S.A. THE FOLLOWING AP PLIES ONL Y IN CANADA. FCC Note: This equipme nt has been teste d and found to comply with the limits fo r a Class B digita l devic e, pursuant to Part 15 of the FCC Rules.
4 VQT3B1 8 ∫ Prod uct Identif icati on Marking Batteries 1 Batter y p ack (Li t h iu m ion battery p ack) ≥ Use the spec if ied unit to rechar ge the battery p ack. ≥ Do not use the bat tery pack with equipment othe r tha n the specified unit . ≥ Do not get dirt , sand, li quids, or other fore ign matter on the te rminals.
5 VQT3B18 <For USA-California only> This pro duct cont ains a CR Coin Ce ll Lithium B attery which co ntains Perc hlorate Mate rial – special han dling may apply . See www .dtsc. ca.gov/h azardouswaste /perchlorat e . A lithium ion/polymer battery t hat is recyclable powers the product you hav e purchased.
6 VQT3B1 8 IMPOR T ANT SAFETY INSTRUCTIONS Read these opera ting instruc ti ons carefully bef ore using the unit . Follow the sa fety instruct ions on the unit and the applicable safety inst ructions listed belo w . Keep these operating instructio ns handy for futur e referenc e.
7 VQT3B18 Prec aution s USE & LOCA TION ≥ TO A VOID SHOCK HAZ ARD ... Y ou r camera and po wer supply shoul d not be exposed to rain or moisture.
8 VQT3B1 8 ∫ Indemnity a bout recorded content Panason ic does n ot accept any responsibil ity for damag es directly or indirect ly due to any type of problems that result in loss of recording or edited content, and does not gua rantee any cont en t if recording or editing does not work prope rly .
9 VQT3B18 Preparatio n Basic Ad vanc ed Copy/Dub bing With a PC Other s Accessori es ......... .......... ........ ....... ..........1 1 Quic k Gu id e . ... ... ..... ... ... ... ..... ... ... ... ..... ... .1 2 Prep aration Befo re u sin g [1] Parts identifi cation and handli ng .
10 VQT3B1 8 Playing ba ck motion picture s/ still pi cture s by da te .... ......... ..... ... 94 Face Highlight Play back/ Hig hlight Pl ayba ck/ Intellig ent Scene Selection..... .. .. .. 95 Changin g the playb ack settings and p laying back th e slide show .
11 VQT3B18 Accessories Check the ac cessories before using this unit . Keep the ac c essories out of reac h of children to pre ve nt swallowing. Product numbers correc t as of Aug.
12 VQT3B1 8 Quick Guide ∫ Charging the ba ttery 1 Connect the A C cable to the AC adapt or and th e AC ou tlet. 2 Insert t he batt ery in to t he AC a dap to r by aligning t he arrows. ∫ Inserting the battery Install the ba ttery by in serting it in th e directi on shown in the figure .
13 VQT3B18 T o turn off the unit B The sta tus indicato r goes off . ∫ Selecting a mode Opera te the mode dial t o change t he mode to , or . ∫ How to use the touch scr een Y ou ca n op erat e by di re c t ly tou ch ing th e LCD monitor (tou ch screen) with your fin ger .
14 VQT3B1 8 ∫ Motion picture/S till picture playback 1) Chan ge the mode to . 2) T ouch t he play mode select icon A . 3) Se lect the [VIDEO/PI CTURE] you wish to pl ay back. ≥ T ouch [ENTER]. 4) T ouch the scen e or the s till pictur e to be play ed b ack.
15 VQT3B18 Pre paratio n Before u sing 1 Part s ident ification and handling 1 Spe aker 2 Power button [ ] ( l 25) 3 Inlet (cooling fan) ( l 30 ) 4 Intelligent auto/Manual button [iA/MANUAL] ( l 35, 86) 5 Op tical imag e stabiliz er b utto n [ O.I .S.
16 VQT3B1 8 25 LCD monitor (T ouch scre en) ( l 27) ≥ It can open up t o 90 o . ≥ It can ro tate up to 18 0 o A towards the lens or 90 o B tow ard s th e vie w fin de r .
17 VQT3B18 33 Shoe adaptor m ount ( l 166) 34 Shoe adap to r cover ( l 166) 35 Shoe adap tor rele ase l ever [SHOE ADAPTOR RE LEASE] ( l 166) 36 Photoshot button [ ] ( l 33) 37 Zoom lever [W/T] (In Mo.
18 VQT3B1 8 ∫ About the 3D Conv ersion Lens ( l 56 ) 1 Att ac hment screw 2 Protective gla ss (front) 3L e n s 4 Adjustment dial cover 5 V ertical position adjustm ent dial [] 6 V ertical alignme nt.
19 VQT3B18 Pre paratio n Setup 1 Power supply ∫ About batteries that you can use with this unit The battery th at can be used with thi s unit is VW-VBG130/VW- VBG260/VW- VBG6. ≥ The unit has a function for distinguishing b atteries which can be used safely .
20 VQT3B1 8 ≥ We reco mmend us ing Panasonic bat teries ( l 1 1, 21, 16 4). ≥ If you use ot her batter ies , we cannot guaran tee the quali ty of this produc t. ≥ Do not heat or ex po se to flame. ≥ Do not leave the ba ttery(ies) in an automobile expo sed to direct sunl ight for a long per iod of time with doo rs and windows closed.
21 VQT3B18 ∫ Chargin g/Recording ti me ≥ T emperature : 25 o C (77 o F)/humidity: 60%RH * The battery pack holder ki t VW-VH04 (optional) is necessary . ≥ These times are ap proximations. ≥ The indica ted cha rging tim e is fo r when the ba ttery ha s been di scharged c ompletel y .
22 VQT3B1 8 Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipme nt as it is designed only for this unit. Also, do not use the AC cable from other equipment w ith this unit.
23 VQT3B18 Pre paratio n Setup 2 Recording to a card Use SD cards confor ming to Class 4 or higher of the SD Sp ee d Class Rating* for motion pi ct ure record in g.
24 VQT3B1 8 Caution: Check tha t the a ccess lamp has gone off. 1 Open the LCD monitor . 2 Open the SD card/termi nal cover a nd insert (r emove) the SD card into (from ) the card slot. ≥ Face the label sid e B in the direction shown in the ill ustration and pres s it straight in as far as it will go.
25 VQT3B18 Pre paratio n Setup 3 T u rning the un it on/off Y ou can turn t he unit o n and of f usin g the power button , the LCD monitor or the vi ewfinder . Press the powe r button to turn on the unit. A The sta tus indicato r light s on. Opening th e LCD monitor or extendi ng the viewfi nder turns on the unit.
26 VQT3B1 8 Pre paratio n Setup 4 Selecting a mode Change the mode to recording or pl ayback. Operate the mode dial to change the mode to , or . Motion Picture Recording Mode ( l 31) Still Pi ct ur e Reco r ding Mo de ( l 33) Playba ck Mo de ( l 37, 90 ) ≥ Align with th e status indicat or A .
27 VQT3B18 Pre paratio n Setup 5 Adjusting LCD m onitor/ viewfinder Y ou ca n op erat e by di re c t ly tou ch ing th e LCD monitor (tou ch screen) with your fin ger . It is easier to us e th e stylus pen (sup plied) for det aile d operation or if it is hard to operate wit h your fingers.
28 VQT3B1 8 ∫ Adjusting the field of view It adjust s the fie l d of view to show the images o n the vie wfinder clearly . Adjust the foc us by rot ating the eyepiece corrector dial. ≥ Extend the v i ewfinder and clos e t he LCD monit or to turn on th e vie wfinde r.
29 VQT3B18 Pre paratio n Setup 6 Setting date a nd time When th e unit is turned on fo r the first time , a message aski ng you to set the da te and time will appear . Select [YES] an d perform steps 2 to 3 below to set the date a nd time. ¬ Change the mode to or .
30 VQT3B1 8 Basic Recording/ Playback 1 Before recording ∫ Basi c cam era p osit ioni ng 1 Hold the unit wit h bot h hands. 2 Put your ha nd through th e grip belt. 3 It is convenie nt to use the Sub- recording S tart/ S top button A when holding the unit at waist level.
31 VQT3B18 Basic Recording/ Playback 2 R ecor ding m otion pictures 1 Change the m ode to . 2 Open the L CD monitor or extend the viewfinder . 3 Press the recording st art/stop button to start re cord ing. B When yo u begin r ecording, ; changes to ¥ .
32 VQT3B1 8 ∫ Screen indica tions in the Motion Picture Recording Mode About th e comp atibility o f the recorded motion pic tures Plea se refer to pa ge 55 about 1080 /60p ≥ They are not comp atible with devices other t han those that suppo rt A VCHD.
33 VQT3B18 Basic Recording/ Playback 3 Recording still pictures 1 Change the m ode to . 2 Open the L CD monitor or extend the viewfinder . 3 Press the button h alfway .
34 VQT3B1 8 ∫ About the screen ind ications in Stil l Picture Recording : S till picture operation indicator ( l 139 ) ß : Flash ( l 65) ß j : Flash level ( l 65) : Red-eye r eduction ( l 65) : ME.
35 VQT3B18 Basic Recording/ Playback 4 Intelligent Auto Mode The followi ng mode s (appropriate for the conditio n ) are set just by pointi ng the unit to what you want t o record.
36 VQT3B1 8 ≥ Using a tripo d i s reco mmended in Night Portra it and Night Scener y Mode. ≥ Faces can not be de tected de pending on th e recordi ng condition s, such as when faces are of certa in sizes or at cert ain tilts or when di git al zoom is used.
37 VQT3B18 Basic Recording/ Playback 5 Motion picture/S till picture playback 1 Change the m ode to . 2 T ouch the play mode s elect icon B . 3 Select the [VI DEO/PICTURE] you wis h to play bac k. ≥ T ouch [ENTER]. 4 T ouch the scene or the still picture to be played bac k.
38 VQT3B1 8 5 Select the p layback ope ration by touch ing the operation i con. A Operation ic on ≥ T o uch / to d isplay/not -display t he opera tion icon. Motion pict ure p layback Sti ll picture pl ayback 1 / ; : Playb ack/Pause 6 : Rewi nd playback 5 : Fast forw ard playbac k ∫ : S to ps the playb ac k and shows the thumbnails.
39 VQT3B18 ∫ Change the th umbnail disp lay While the thumbnail is displ ayed, the thumbnail displ ay changes in the followin g order if the zoo m lever or adjust zoom buttons are operated to side or side.
40 VQT3B1 8 Basic Setup 1 Using the menu sc reen 1 Press the M ENU button. 2 T ouch the top menu A . 3 T ouch the submenu B . ≥ Next (p revious) p age can be d isplayed by touching / . 4 T ouch the desired item to e nter the setting. 5 T ouch [EXIT] or press the MENU button to e xit the menu setting.
41 VQT3B18 This allows qui ck setting of some of th e menus. 1 Press the Q.MENU button. The followi ng menus can be set. T ouch the desir ed menu. ≥ The items displayed d iffe r depending o n the position of the mode dial or settin gs. 2 T ouch the desired item to e nter the setting.
42 VQT3B1 8 Basic Setup 2 Using the Setup Men u ≥ The items displ ayed differ depending on the position or settings of the mode dial. Select the menu. The screen display can be chan ged to [OFF] (a por tion of informat ion displayed) or [ON] (all informati on displayed).
43 VQT3B18 ≥ When the home reg ion is set for th e first time, t he s creen for select ing ho me/travel destina tio n appears af ter setting t he home region succes sively . If the home region has already bee n set once, exec ute the menu opera tion for S tep 1.
44 VQT3B1 8 The unit is put into recording p ause approx. 1 second whe n the unit is turned on with the mode set to or . ≥ Depending on t he recording cond itions, st art time may be longer than 1 second. ≥ In the Quick power on mode, the zoo m magnificat ion becomes 1 k .
45 VQT3B18 Please ref er to page 49. The recordin g lamp lights up dur ing recording and f lashes when the unit rec eives a signal from the remote contr ol or when th e Self- timer is coun tin g down. When this is set to [OFF], it does n ot light d uring recordi ng.
46 VQT3B1 8 It adjust s the brigh tn ess of the vie w fin der . ≥ These settings will not af f ect the images actually recorded. 1 Exten d the viewfinder an d open the LCD monit or . 2T o u c h [ EVF SE T ]. ≥ The viewfi nd er turns on. 3 T o uch / to adjust t he setting.
47 VQT3B18 Please be aware that if a medi um is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. ( l 1 12, 124) ≥ When for m at ting is complet e, touch [EXI T ] to exit the message screen.
48 VQT3B1 8 This item is used to start t he unit demonstr ation. (Only when t he mode is at the or position) If [DEMO MODE ] is switched to [ON] an d you touch [EX IT ] when there is no SD card inserte d, the demonstrat ion automati ca lly start s. If any operat ion takes plac e, the demonstra tion is cance l ed.
49 VQT3B18 Basic Setup 3 Using with the rem ote control Select the menu. 1 Power on/off button [ ] Unit can b e tur ned on/off w hen the LCD monito r is opened or the viewfin der is extend ed. ≥ Unit cannot be turned on by the power on/ off button when 36 hours have passed after the unit is turned off.
50 VQT3B1 8 ∫ Remote control usable range A Remote control sensor Dista nce: Withi n approx . 5 m (16 feet) Angle: App rox. 10 o up and 15 o down, left, and right ≥ The re mote contr ol is inte nded for in door operation . Outdoors or und er strong light, the unit may not operate prope rly even within the usab le ranges.
51 VQT3B18 Advanced Recording (Advanced) 1 Zoom in/out function The maxi mum opti cal zoom rat io is 12 k . The def au l t se ttin g of the [ZO OM M ODE ] is [i.Zoo m 18 k ]. It can be extend ed to a maximum of 18 k during Mot ion Pictur e Re c ording Mode.
52 VQT3B1 8 Advanced Recording (Advanced) 2 Image S t ab ilizer Functi on Use the image st a bilizer to reduc e th e effect s of shake during re cording. This unit is equip ped with HYBRID O.I.S. HYBRID O.I. S. is a h ybrid of o ptical and electrical i mage st abilizer .
53 VQT3B18 In Mot ion Picture Rec ording Mode, you can f urther impro ve optical i mage sta bilization by touchin g a nd holdi ng O.I.S. LOCK i con. With thi s func tion, you can furt her reduce the eff ects of the sh ake that tend s to occur when us ing zoom.
54 VQT3B1 8 Advanced Recording (Advanced) 3 AF/AE tracking It is poss i ble t o set the foc us and exposure to the subject spec ified on the touc h screen. The focus and expo sure will keep following the s ubject automatically even if it moves. (Dynam ic tracking) ¬ Change the mode to or .
55 VQT3B18 Advanced Recording (Advanced) 4 1080/60p recording This is a 1080/ 60p (19 20 k 1080/60 progressi ve) recordin g mode th at can recor d in maximum quality*. * This means the hig hest quality for t his unit. ¬ Change the mode to . ≥ Please ref er t o page 156 fo r details abou t approximate re cordable time.
56 VQT3B1 8 Advanced Recording (Advanced) 5 Recording 3D video With the su ppli ed 3D Conversio n Lens attach ed, you ca n record life- like and powerful 3D video. T o view 3D v ideo, a televisi on that s upports 3D is req uired. ≥ In the unit , the r ecordable 3D video s are side-by- side format (2-s cr een structure).
57 VQT3B18 3 Tighte n the att achment screw of the 3D Conversion Le ns by rot ating to LOCK. ≥ Be carefu l not to overtig hten. If the 3D Conve rsion Lens is overtig htened, you may not be able to remove it from the unit. ≥ Attach the 3D Conversion Le ns securely so it will not tilt or move.
58 VQT3B1 8 5 Open the a djustment di al cover . ≥ When tur ning the adjustment d ials, h old the 3D Conversion Lens in the pa lm of y our hand from th e bottom a nd operat e with the fi ngers of your other han d without ap plying too much force from ab ove.
59 VQT3B18 9 (Aft er checking the ope ration des cription, to uch [NEXT].) Adjust the ve rtica l alignment adju stme nt di al to align the verti cal position of th e subject sh own duplicated. ≥ Aim the unit at a subject fr om a di stance of ap proximatel y 1.
60 VQT3B1 8 ≥ Use of a tripod is reco mmended for record ing wit h a stable pic ture. ≥ The recept ion range for the remot e control might be come narrow at the upp er s ide of the unit, so opera te from the lower side.
61 VQT3B18 ∫ Functions th at cannot be used during 3D recording When rec ording with the 3D Co nversion L ens, you cannot u se cert ain funct ions. *1 The zoom positio n is fixed, and t he zoom operation is dis abled. *2 The Optical Image S tabilizer and Optical I mage St abilizer Lock can be used.
62 VQT3B1 8 Advanced Recording (Advanced) 6 Recording functi ons of operation icon s Select the op eration icons to add differ ent effe cts to th e image s to be recorded. ¬ Change the mode to or . 1 T ouch to display the operation icons on the sc reen.
63 VQT3B18 When you st art rec o rdi ng, the image/ au dio gradual ly appears . (Fad e in) When you p ause re cording, the image /audio gradually disappear s.
64 VQT3B1 8 When a sm iling face is detected during motion picture re cording, the unit automatical ly records a stil l pictur e. The icon cha nges each time it is to uched. (ON) # (Face Recognition) # OFF : The unit records a still picture on detecting a smiling face.
65 VQT3B18 When the button is pres sed, the flash is ac tivated and th e pict ure will be record ed . Use the Built- in fl ash in orde r to re cord still p ictures in dar k places.
66 VQT3B1 8 This is for recording still pict ures using the tim er . Each time t he icon is selected, the indica tio n changes by one set t ing in the followi ng order: Ø 10 (Records af ter 10 second.
67 VQT3B18 Y ou can check i f th e image is lev e l w hile recordi ng or playin g back motion pictu r es and still pictures. The function can also be used to estimate the balance of the composition. It will switch every time the icon is touched. # # # Set ting cance led ≥ It is possi ble t o set from the quic k menu.
68 VQT3B1 8 Advanced Recording (Advanced) 7 Recording functi ons of menus When you r ecord image s in dif ferent situati ons, this mode automatic ally set s optimum shutter speeds a nd apert ures.
69 VQT3B18 ≥ (Fireworks) j The shutt er s peed is 1/30. j Image may get was hed out when recorded in bright surroundings . ≥ (Night s cenery/Night p ortrait) j The shutt er s peed is 1/2 or more in S till Picture Recording Mo de. j Using a tripo d i s re co mmended.
70 VQT3B1 8 A scene that moves slowly for long period of ti me is recorde d frame by fra me with an interv al, and is recorded as a short ti me moti on picture. A frame is record ed with a set recording interval. 30 frames will make up motion picture of 1 second.
71 VQT3B18 Use this funct ion to record an image with vivid color , like an image on a movie film. ≥ Change the mode to . ≥ Switch to Manual Mode. ( l 86) ≥ Set [ZOOM MODE ] to [Opt.Zoom 12 k ]. ( l 69) ≥ Set [REC MODE] to [HA] or [HG]. ( l 69) ≥ The shutt er s peed is 1/48 or more.
72 VQT3B1 8 ∫ Registerin g a face for fa ce recognition ≥ Up to a maximum of 6 peo ple can be regist ered. 1 Align th e person’s face with the guide. ≥ T ake a picture of the persons fac e fro m the front, ensuring that their hair does not hide the outli ne of their f ace, thei r eyes or their eyebrows.
73 VQT3B18 ∫ Changing the information of a registered person 1 Select the menu. 2 T o uch the desired item to ente r the setting. ≥ Up to 3 face shot s can be reg ister ed. T o additionall y reg ister or to ch ange/delet e t he regist er ed face sho ts, to uch or the fac e shot.
74 VQT3B1 8 When a regist ere d person is detect ed by face rec ogn ition during rec ording, the name register ed f or that person is dis pla yed. ≥ Change the mode to or . ≥ Displayed name will disappea r after a while. ≥ It is display ed according to t he reg istratio n orde r setting from t he first per so n.
75 VQT3B18 Y ou can rec ord bright pictur es even in dark places by slowing the shutt er speed. ≥ Change the mode to . ≥ Switch to Manual Mode. ( l 86) ≥ The shutt er speed is set to 1/ 30 or mor e depending on th e surrounding brig htness. ≥ This func tion cannot be us ed when using the 3D Conver sion Lens.
76 VQT3B1 8 Recording motion p ictures wi th mo re vivid colors, using x.v .Color ™ tec h no l o gy. ≥ Change the mode to . ≥ Switch to Manual Mode. ( l 86) ≥ For more realist ic colors, use an HDMI mini cable wit h a TV that support s the x.v .
77 VQT3B18 This will reduce the wind noise coming into th e built -in microp hones while maintain ing the realism. ≥ Change the mode to . ≥ Switch to Manual Mode.
78 VQT3B1 8 When record ing, the input lev el f rom the built-i n microphones and the external microph one terminal can be adj usted. ≥ Change the mode to . ≥ Switch to Manual Mode. ( l 86) 1 Select the menu. ≥ It is possible t o select the setti ng from the quick menu in Manual Mode.
79 VQT3B18 Change the lower setting of th e built -in microphone ac c ording to your choic e. ≥ Change the mode to . ≥ Switch to Manual Mode. ( l 86) ≥ Norma lly set to [ 0dB]. ≥ Select [+3 dB] or [+6dB ] t o get strong power feeling at bass level.
80 VQT3B1 8 Parts wher e white saturati on (color satur ation) is likely to occur (e xtremely brightly lit or sh iny parts) are disp layed with diagonal line s (zebra patte rn).
81 VQT3B18 A graph wit h brightnes s as horizont al axis and n umber of pixe ls at that brig htness as ver tical axis is disp lay ed. It is possi ble t o determine the expos ure of the whole image by look ing at the distribu tion in the grap h. Adjust the br ightness using [ IRIS].
82 VQT3B1 8 The hi gher the number of pixels, t he higher the clar ity of t he pictur e when pri nting. ≥ Change the mode to . ≥ The number of rec ording pixels t hat can be set changes depending on sele cted screen aspect rat io. ( l 83) ∫ Picture s ize and Ma ximum zoom ra t io * Extra optic al zoom cannot be us ed.
83 VQT3B18 Selecting t he picture qualit y . ≥ Change the mode to or . This allows y ou t o select the aspe ct ratio of the pi ct ur es to suit print i ng or the playback method. ≥ Change the mode to . ≥ This func tion’s def ault settin g is [3:2].
84 VQT3B1 8 Recording is don e continuous l y at th e rate of 60 still pictures per second. Use this funct ion to record an obje ct with fast movement . ≥ Change the mode to . 1 Select the menu. 2 Press th e b utton. ≥ flash es in red during reco rding.
85 VQT3B18 Illuminat i ng t he subject makes it eas ie r for the camera to f oc us when recording i n l ow l i ght conditi ons that make f ocusing dif ficult. ≥ Change the mode to . ≥ Switch to Manual Mode. ( l 86) ≥ The avai lable distan ce of the AF assist lamp is approx.
86 VQT3B1 8 Advanced Recording (Advanced) 8 Manual recording The operatio n sequence dif fers for the LCD monit or an d viewfinder . ¬ Change the mode to or .
87 VQT3B18 Automat ic whit e bala nce fun cti on ma y not repro duce natur al c olors d ependin g o n the sc enes or light ing conditi ons. If so, you ca n adjust the white balance ma nually . ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode.
88 VQT3B1 8 Shutter Speed: Adjust it when recordin g fast- mo vin g subjects. Iris: Adjust it when t he screen is to o brigh t or too dark. ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode. ( l 86) ≥ For how to perform the settings whe n using the viewfinder, refer to page 86 .
89 VQT3B18 Perform focu s ad jus tments using the multi manual ring. If auto foc using is diff icult due to the con ditions, then use Ma nua l Focus. ¬ Change the mode to or . ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode.
90 VQT3B1 8 Advanced Playback (Advanced) 1 Playback Operations For det ai ls on the basi c pla yback operatio ns, refer to p age 37. Motion picture playback usi ng operation icon Playback operation Playbac k di sp lay Operating s tep s Fast forward/ rewin d pl ayback During Play back To u c h 5 during play back to fast forward.
91 VQT3B18 A single fra me from the recorde d motion pict ure can be saved as a sti ll picture. Picture size of the still picture to be reco rded is (1920 k 1080). 1 Pause at the scene you want to sav e as a still pic ture during playback. ≥ It is convenie nt to use slow-motion playback and fr ame -by-frame play back.
92 VQT3B1 8 An image of one s c ene is displayed as a thumb nail at set sear ch condition. Sc ene can be played back from any midway point of the scene you wish to see. ≥ Operate the zoom lever or the adjust zoom bu ttons to side and c hange over the thumbnail display to Highlight&Time frame index.
93 VQT3B18 If playbac k of a sc ene was stoppe d half way , the playback can be resume d fr om where it was stoppe d. If playba ck o f a mot io n pict ure is st oppe d, appears on the t humbn ail vi ew of the stop ped scene. ≥ The memorized res ume position is cleared if you tu rn off the un it or change the mode .
94 VQT3B1 8 Advanced Playback (Advanced) 2 V arious playback functions The scene s or the still pictu r es recorded on the same day c an be played back in su ccession. 1 T ouch the date selec t icon. 2 T ouch the playback d ate. The scene s or t he s till pictures r ec orded on the date selec ted are displayed as thumbnails.
95 VQT3B18 A par t c an be extracted an d played back even when not set to normal play back. 1 T ouch . 2 T ouch the desired play back mode. 3 T ouch the desired item . ≥ When [F ACE HIGHLI GHT]/ [HIGHL IGHT] is sele cted * This appears only when [F ACE HIGHLIGHT ] is sel ected.
96 VQT3B1 8 ≥ Playing back of a ll the sc enes retu rns if t he unit is t urned of f or t he mode is changed. (Highlight playback) ≥ Highlight playb ack cannot be perf orme d wi th in terval-re corded motio n pictures. ( l 70) (Intelli gent scene select ion) ≥ Up to 9 section s can be skipped for a si ngle sce ne.
97 VQT3B18 ∫ Playback ti me setting T ouch the playback time. ≥ The playbac k time of [AUTO ] is a maximum of approx. 5 minutes. ≥ Playbac k time may become sho r te r than the se tting, or it may n ot even play back if the part recognized as clearly recorded i s short.
98 VQT3B1 8 1 T ouch . 2 T ouch the desired item . 3 (When [DA TE SE TUP] is selected) T ouch the playback d ate. (When [SLID E INTERV AL] is selected) T ouch the interval of pla yback for the slide show . (When [MUSIC SELECT] is selected) T ouch the desired soun d.
99 VQT3B18 Advanced Editing 1 Deleting scenes/s till pictures ¬ Change the mode to . ∫ Deleting multi ple scenes /still pictures from the thumbnail display 1 Press the button while the thumb nail view screen is displa yed. 2 T ouch [ALL SCENES] or [SELECT].
100 VQT3B1 8 ≥ Y ou can also delete scenes by pres sing the MENU button, selecting [EDIT SCE NE] # [DEL ETE] # [AL L SCENES ] or [SEL ECT]. ≥ Y ou can also delet e still pictur es by pressing the MENU button, selecting [PICT . SETUP] # [DEL ETE] # [AL L SCENES ] or [SEL ECT].
101 VQT3B18 T o delete an unne ce ssary portion of a scene, first di vide the scene and then delete the unnecess ary portion. ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/60 p] or [SD CARD]/[A V CHD]. ( l 37 ) 1 Select the m enu.
102 VQT3B1 8 Deletes fac e recognition informa tion from scen es in which faces were rec ognized. ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/60 p] or [SD CARD]/[A V CHD]. ( l 37) . 1 Select the m enu. 2 T ouch the desired sce nes with persona l information to be deleted.
103 VQT3B18 Advanced Editing 2 DPOF setting Y ou can write the dat a sele cting still pictures to be printed and the numb er of prints (DPOF data) ont o the SD ca rd. ¬ Change the mode to and touch the play mode select icon to select [SD CARD]/[PICTURE].
104 VQT3B1 8 Advanced With a TV 1 W atching Video/Pictures on yo ur TV ≥ Use the A V multi cable (supplied) or HDMI mini cab le (supplied/optional) and check the output settings. ( l 10 7) ≥ Use of the follo wing Panasonic HDMI mini cables i s reco mmended to con nec t the unit to the HDMI terminal.
105 VQT3B18 ≥ Check th at the plugs are inser ted as far as th ey go. ≥ Always use t he s upplied HDMI mini cabl e or a gen uine Panason ic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any ot her A V multi cables except th e supplied one.
106 VQT3B1 8 ∫ T o watch images on a re gular TV (4:3) or when both sides of the images do not appea r on the s cree n Change the menu setting to displa y the images cor rectly .
107 VQT3B18 Select the desired method of HDMI output. ≥ [AUTO] determin es the o utput res olution a utomatically based on informati on from t he connec te d TV . If the image s are not output on th e TV when the setting is [AUTO] , switch to the method [1080p] , [1080i] or [48 0p] which e nables the images to be dis played on your TV .
108 VQT3B1 8 Advanced With a TV 2 3D video playback Connect t he unit to a 3D compatib le televis i on and pl ay back scene s recorded in 3D t o enjoy life-li ke and powe rful 3D video. ¬ Change the mode to an d touch the play mode select icon to select [SD CARD]/[A VCHD].
109 VQT3B18 ≥ Y ou canno t play back 3D vide o on the LCD monitor of t he unit . When yo u play back scenes recorded in 3D on the LCD monitor , they will be played back in 2D.
11 0 VQT3B1 8 Advanced With a TV 3 Playback using VIER A Link ™ (HDA VI Control ™ ) ¬ Change the mode to . 1 Select the m enu. ≥ If you are not u sing VIE RA Link , set to [OF F]. 2 Connect t his unit to a Panas onic TV comp atible with VIERA Link with a HDMI mini cable.
111 VQT3B18 3 Operate w ith the remote control for the TV . 1) Press the button up, down, lef t or right to select a scene or still picture to be played back, and then p res s th e butt on in th e ce nter t o se t it. 2) Activate t he opera tion icons that ar e displayed on TV sc reen with the remot e control for the TV .
11 2 VQT3B1 8 Copy/Dubbin g With this unit/ other product s 1 Connecting a DVD burn er to copy to/pl ay back a disc Motion p ictures or still pictures recorded with this unit can be copied to a DVD disc by connecti ng a DVD burner (optio nal) to this unit usin g a Mini AB USB Connection Cabl e (supplied with DVD bur ner).
11 3 VQT3B18 1 Connect the AC a daptor (supplied w ith DVD burner) to the DVD burner . ≥ Y ou cannot supply power to the DVD burn er from thi s un it. 2 Connect t his unit to the AC ada ptor and change th e mode to . 3 Connect this unit to the DVD burner with the Mini AB USB Connection Cab le (supplied with DVD burner).
11 4 VQT3B1 8 ≥ Y ou cannot copy from multiple SD cards to 1 disc. (Y ou can additi onal ly copy only to a DVD-RAM.) ≥ Y ou cannot copy mot ion picture s toge ther wit h st ill pictur es or motion pict ure s in a dif ferent picture quali ty (A VCHD picture quality and conven tional normal p icture quality) to the same disc.
11 5 VQT3B18 ∫ About reco rding format s when copying motion pictu res [A VCHD] ([HA]/[HG]/[HX]/[HE]) : Copying sce nes of 1080/6 0p picture qu ali ty The scenes recor ded in 1080/60p by this unit will be copied after c onv erting to A VCHD picture qu ality .
11 6 VQT3B1 8 Approximate time for copying to a disc T o copy motion pi ctures to th e fu ll capacit y of a disc Disc type Copy time [A VCHD] [Sta ndard] ([XP]) [St and ar d ] ([S P]) DVD-RAM Approx. 50 min to 1 h 20 min Approx. 1h3 0m i n t o 2h3 0m i n Approx.
11 7 VQT3B18 ≥ The disc t hat was copied to can be played back by connecting this unit and a DVD burner . ≥ Do not turn of f this unit or the DVD burne r or disconnect t he Mini AB USB Connection Cable while copy ing. Also, do no t shake this unit or the DVD burner .
11 8 VQT3B1 8 ≥ Only discs that ha ve been copied by connecting this unit to the DVD burner or created wi th HD Writer AE 2.6T can be played back. A Mini AB USB Connectio n Cable (s upplied with DVD bu rner) 1 Connect this u nit to the DVD burner to pre pare for playback.
11 9 VQT3B18 ≥ Connect this unit to t he DVD burner and then touch [PLA Y DISC]. ( l 11 3 ) ∫ Formatting dis cs This is for initializing DVD-RAM, DVD- R W and +RW discs. Please b e awa re that if a disc is fo r matted, then all the dat a re corded on the disc w il l be erased.
120 VQT3B1 8 Copy/Dubbin g With this unit/ other product s 2 Dubbin g with a Blu-ray disc recorder , vide o, etc. ∫ Dubbing directl y from inserted SD ca rd ∫ Dubbing with a USB cable ≥ Use the AC adap tor to free you f rom worrying about t he battery runn ing down .
121 VQT3B18 2 T ouch [RECORDER] on the screen of this unit. ≥ When you se lec t an option other than [RECORDER], reconnect t he USB cable. ≥ When using th e batt ery , the LCD monitor tu rns of f after abou t 5 secon ds. T ouch the scr een to turn th e LCD monitor on.
122 VQT3B1 8 Images pla yed back on this un it c an be dubbed onto a DVD rec order or video dev ice. ≥ Images are dubbed in standard quality . ≥ Use the AC adap tor to free you f rom worrying about t he battery runn ing down . 1 Connect t his unit to a v ideo device an d then change the mode to .
123 VQT3B18 ∫ Dubbing s cenes record ed in 3D Copying unal tered as 3D video When [3D PL A YBACK] is [3D], th e 3D video is recorde d in side-by-si de format. ≥ If the dub bed v ideo does not ch ange to 3D video , mak e the necessar y settings on th e TV .
124 VQT3B1 8 With a PC Before u sing 1 What you c an do with a PC HD W riter AE 2.6T Y ou can copy the motion /st ill picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards u sing HD Writer AE 2.6T, t he software installed in t he supplied CD-RO M.
125 VQT3B18 Avail able function Dat a type Software r equired Copying data to a PC ≥ Scenes recorded in 3D will be copi ed unaltered as 3D video. Moti on pict ure and still pict ure CD-ROM (supplied): HD Writer AE 2.6T When writing sc enes recorded in 3D to a Blu-ra y disc, DVD or SD card, a bla ck frame is displayed around the thumbnail .
126 VQT3B1 8 ≥ Motion pictures that have been recorded on a nother device cannot be written to the software supplied with this unit. T o write m otion picture data recorded with the Panasonic High Definition Video Camera sold prev iously , use the HD Writer supplied with the unit.
127 VQT3B18 Before ope ning the CD-ROM pa ckage, please rea d the foll owing . Y ou (“ L i c e ns ee” ) ar e gr a nte d a l i c en s e fo r the Sof t ware defined in t his End User License Agre ement (“Agreement ”) on conditi on that you a gree to th e terms and conditi ons of this Agre ement.
128 VQT3B1 8 With a PC Before u sing 2 Operating en vironment ≥ Even if the sys tem requirement s mentioned in thes e operating instru ctions are ful fill ed, some PCs canno t be used. ≥ A CD-ROM drive is necessary to install the su pplied softw are ap plications.
129 VQT3B18 ≥ Supplied CD-ROM is ava ilable for Windows only . ≥ Input is not supported in languages ot her than English , Ge rman, French and Simplif ied Chinese.
130 VQT3B1 8 ∫ Operating e nvironment for the card rea der function (m ass storage) ≥ The USB equip ment operates with th e driver installe d as stand ard in the OS.
131 VQT3B18 With a PC Setup 1 Inst allation When installing the software, log on to your comput er as the Administrator or with a user name wi th equivale nt auth orization. (I f you do not h ave author ization to do thi s, consult y our manager .) ≥ Before st arting the installat ion, close all appl ications th at are running.
132 VQT3B1 8 5 Select whe re the applic ation is to be inst alled, then click [Next]. 6 Select [Y es] or [No] to create shortcu t. ≥ A message regar ding the pla yback in t he envi ronment used may be di splayed depe nding on the performance of the PC us ed.
133 VQT3B18 With a PC Setup 2 Connecting to a PC ≥ Connect t his unit to the PC af ter the sof tware applicat ions are install ed. ≥ Remove the supp lied CD-ROM from your PC.
134 VQT3B1 8 ≥ Do not use any ot her USB cables exce pt the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ When the unit is connected to a PC, it cannot be turned off. Disco nnect the US B cable , befo re tu rning t his un it off.
135 VQT3B18 When the unit is connecte d to a PC, it is recogniz ed as an external driv e. ≥ Removable disk (Exampl e: ) is display ed in [Compu ter]. Example fo l der structure o f an SD car d: The following dat a will be recorded. 1 Up to 999 still p ictures in JPEG format ( [S1000001.
136 VQT3B1 8 With a PC Using with a PC 1 S t arting HD Writer AE 2 .6T ≥ When using HD Write r AE 2.6T on Win dows XP, log on to your computer as A dmin istrato r (or with a login name eq ually autho rized). If you log on with a login name othe r than Administ rat or , you cann ot us e the applicat ion s.
137 VQT3B18 With a PC Using with a PC 2 If u sing Mac ≥ HD Writer AE 2.6T is not available for Mac. ≥ iMovie’09 supp orted. For det ails about iMovie ’09, please cont a ct Apple Inc.
138 VQT3B1 8 Oth ers Indicat ions 1 Indicatio ns ∫ Recording indi cations Motion Pi c ture Recording Mode S till Picture Recordin g Mode Remaining battery power ( l 22) 1h30m Remaining battery time .
139 VQT3B18 AF assist la mp ( l 85) Zoom Microphon e ( l 77 ) Focus Microph one ( l 77) S tereo Microph one ( l 77) Wind Noise Canceler ( l 77 ) // Bass Setting ( l 79) / Smile Shot ( l 64) Microphone.
140 VQT3B1 8 ∫ Playback i ndications ∫ Indication o f connection to other device s ∫ Confirmato ry indications ∫ Confirmato ry indications when a DVD burner is connected 1 / ; / 5 // 6 // 7 / 8 / 9 / : / D / E / ;1 / 2; Display during pl ayback ( l 37, 90 ) / Operati on icon is displayed/ not di splayed.
141 VQT3B18 Oth ers Indicat ions 2 Messages Major conf irmat ion/error mes sages to be indic ated on the screen in t ext. CHECK CARD. This card is not c omp atible or it can not be recognized by th e unit. If this message appears even thoug h motion pi ctures and still pictures are recorded on an SD card, th e ca rd may be unstable .
142 VQT3B1 8 If faulty management informat ion is foun d, t he messages may app ear and a repai r is performed. (Repairing may take time depen ding on the error .) ≥ The ab ove message is displayed when abn ormal manage ment inf ormation is detected when the scenes ar e displayed in thumbna il.
143 VQT3B18 Oth ers T rou bleshootin g Problem Check points This unit cannot be tur ned on . This unit does not stay on long enough. Battery runs dow n quickly . ≥ Charge the bat ter y again to ensure i t is suf ficiently charged. ( l 19) ≥ In cold plac es, the batt ery using time beco mes shor ter .
144 VQT3B1 8 Problem Check points This unit cannot be operated though it is tur ned on . This unit does no t operate normally . ≥ Remove the bat tery or AC adap tor , wait about 1 minute and then r ec onnect the bat tery or AC adaptor . Then about 1 minute later , turn on the unit again.
145 VQT3B18 Color balance of image s i s stra nge when re co r d ing in a plac e su ch as a gymnasium. ≥ In a place with mul tiple light sources , such as a gymnasium or a hal l, set t he whit e b alance set ting t o (Indoor mode 2). If you cannot rec ord clearly with the (Indoor mode 2), s et it to (Manual adjustmen t mode).
146 VQT3B1 8 Color or bri ghtness of the im age c hang es, o r you may see horizontal bars in t he image . The LCD moni tor flickers indoors. ≥ Color or brightnes s of the image may chan ge, or you may s e e ho r i z o nta l bars i n th e i m ag e wh e n th e object is recorded unde r fluorescent light, me rcury light or sodiu m li ght , etc.
147 VQT3B18 VIERA Link does not work. [Settin g on th is unit ] ≥ Connect with a HDMI mi ni cable. ( l 11 0 ) ≥ Press the MENU but ton, then touch [ SETUP] # [VIE RA Link] # [ON].
148 VQT3B1 8 ∫ If scenes do not change smoothly when played bac k on another device The images may be still for several seconds at the joins between the scenes if the foll owing operation s are performed when mul tiple scenes hav e been continuo usly played back us ing another un it.
149 VQT3B18 Oth ers Cautions for use The unit an d the SD card become war m during use . This is not a malfunct ion. Keep this unit as fa r away as possible from electromagne tic equipment (such as microw ave ovens, TVs, vi deo games etc.
150 VQT3B1 8 Do not use the unit for surveillan ce purposes or othe r business uses . ≥ This unit was des i gne d for consumer intermitt ent use. It was no t intended for continu ous use, o r for any industrial or commercial appli cation resulting in prolong ed us e.
151 VQT3B18 ≥ If the te mpera ture of the battery is extremel y high or extremely low , charging may take time or the batter y may not be charged. ≥ If the charg ing lamp keeps flashing, make sure t hat the terminals of the battery or the AC adaptor are not ex posed to d irt, foreign object s or dust, then rec onnect them properly .
152 VQT3B1 8 About 3D r ecording Att ach the 3D Conversion Lens secu rely . It mu st not be us ed wi th an insec ure attac hmen t. Do not use the 3D Conversi on Lens without adjusting it first. ≥ It will not be possib le to record 3D video correctly , and this may le ad to tire dness or discomfort.
153 VQT3B18 When disposing of or giving away the SD car d, n ot e t h at : ≥ Formatting and deletion of this unit or computer only changes the file management information an d does not complete ly delete the dat a in the SD card.
154 VQT3B1 8 Aft er you have set up the face recognition function, perso nal information will be hel d in this unit and inc l u ded in recorded im ages . ≥ When th e uni t is ser viced , or give n awa y/ disposed of , the personal inf ormati on should be del eted in the intere sts of prot ecti ng pe rsona l info rma tion.
155 VQT3B18 Oth ers About co pyright ∫ Carefully obser ve copy right laws Whatever y ou have reco rde d and c re ated can be use d for your p ersonal entertainment only . Under copyright laws, other ma terials cannot be used without obtaining permission fro m the holders of the copy rights.
156 VQT3B1 8 Oth ers Recording m odes/approxim ate recordable time ≥ SD cards are only mentioned with thei r main memory size. The state d times are th e approxima te re cordable times for continuous recor ding.
157 VQT3B18 Oth ers Approximat e number of reco rdable pictures ≥ SD cards are only ment ioned with thei r main memory size. The st ated number is the approxima te nu mber of recordable pictures.
158 VQT3B1 8 (In Motion Picture Re cording Mode) ≥ The number of recordable picture s depends on whether a nd are used together and on the subject being recorde d.
159 VQT3B18 Oth ers Specifications High Definition Video Camera Inform a tio n fo r you r safe ty Signal system: 1080/60p , 1080/60i Recordin g forma t: 1080/60p : Original format HA/HG/HX/HE: A VCHD format compl iant Ima ge se n s o r : 1/4.
160 VQT3B1 8 Zoom: 12 k Optic al Zoo m , 18 k i.Zoom, 30 k /700 k Digital Zoom Monitor: 3 z wide LCD mon itor (Approx . 230 K dots) Viewfin der : 0.27 z wide EVF (Ap prox .
161 VQT3B18 HDMI mini connector audio output level: Dolby Digit al /Linear PCM MIC input: j 70 dBV (Mic sensiti vity j 50 dB equivalent, 0 dB=1 V /Pa, 1 kHz) (S t ereo mini ja ck) USB: Reader/writ er function SD card: Read /W rite (No copyright prot ec tion support ) Hi-S peed USB (USB 2.
162 VQT3B1 8 ∫ 3D Conversion Lens Dimensions: 78 mm (W) k 59 mm (H) k 97 mm (D) [3.07 q (W) k 2.32 q (H) k 3.82 q (D ) ] Mass (Wei ght): Approx. 195 g (Appro x. 0.429 lbs.) Lens (when att ached to the unit) : F3.2 (f = 2.5 mm) 35 mm equivalen t: 58 mm Minimum record ing distanc e: Approx.
163 VQT3B18 ∫ Stil l pictures Recording m edia: SD Memory Card (F A T12 and F A T16 system complia nt) SDHC Memory Card (F A T32 system compliant) SDXC Memory Card (exF A T system compliant) Refe r to pag e 23 fo r de tail s on SD car d s us able in thi s un i t.
164 VQT3B1 8 Oth ers Optional accesso ries *1 The supplied DC cables c annot be used on th is unit. *2 Please refer t o p age 21, concer ning the batt er y charging ti me and available rec ord ing time. *3 When using the VW-WE08H, set t he zoom to W (wide) side.
165 VQT3B18 NOTE: Accessories and/or model numbers may va ry by country . Please consul t your loc al dealer . Product numbers correct as of Aug. 2010.
166 VQT3B1 8 ∫ Att aching the batte ry pack holder kit T o use the VW-VBG6 for this unit, the battery p ack holder kit/ VW-VH04 (optional) is required . 1 Inser t the D C cabl e i nt o thi s un i t. 2 Insert the battery in the ba ttery holder . ≥ Do not let the DC cable ge t c aught in between th e LCD monitor when closed .
167 VQT3B18 ∫ Att aching the conv ersion lens/ filter kit Att ach the wide convers i on lens (VW-W4607H; optional), t he wide end conver si on lens (VW-WE08H; op tional), ND filter or MC protec tor of the Filter kit (VW-LF46N; opt ional) in front of the lens.
168 VQT3B1 8 In CANADA, plea se contact your loc al Pa nasonic deale r for more information on Accessori es. Accessory Order Form (For USA and Puerto Rico Customers) TO OBT AIN ANY OF OUR ACCESSORIES .
169 VQT3B18 Limited W arranty (ONL Y FO R U.S. A. AND PUERTO RICO) Panasonic Consumer Electronics Company, Division of Panasonic Corp oration of North A merica One Panasonic Way, Secaucus, Ne w Jersey.
170 VQT3B1 8 THERE ARE NO EXPRESS WA RRANTIES EXC EPT AS LISTED UNDER “LIMITED WARRANTY COVERA GE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENT AL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WA RRANTY.
171 VQT3B18 W arranty (F or Canadian Cus tomers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc.
172 VQT3B1 8 Useful Info rmation (Only For Latin American Coun tries) Customer Service Customer Service Directory Obtain product information and operative assistant; localize the closer distributor or Service Center; buy spare parts and accessories by our web site to Latin American: http://www .
173 VQT3B18 Index ∫ Numerics 1080/60p recording . . . . . . . . . . . . . . . 55 3D Conversi on Lens . . . . 18, 56 , 6 0, 1 5 1 3D playback/viewing . . . . . . . . . 108, 152 3D recordin g . . . . . . . . . . . . . . . . 5 6, 15 2 5.1 chan nel . . .
174 VQT3B1 8 Lens c ap . . . . . . . . . . . . . . . . . . . . . . 167 Lens h ood . . . . . . . . . . . . . . . . . . . . . . 30 Limite d Warr anty (Canada ) . . . . . . . . 171 Limite d Warr anty (USA and Puert o Ric o) . . . . . . . . . . . 169 Luminance .
175 VQT3B18 HDC-SDT750&TMT750-P-VQT 3B18_mst.book 17 5 ページ ２０１０年 ８月２０日 金曜日 午後３時５ ３分.
VQT3B18 F0810MZ0 ( 2000 ) Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic W ay , Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P © Panasonic Corporation 2010 Printed in Japan HDC-SDT750&TMT750-P-VQT 3B18_mst.
An important point after buying a device Panasonic HDC-SDT750PP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic HDC-SDT750PP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic HDC-SDT750PP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic HDC-SDT750PP you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic HDC-SDT750PP will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic HDC-SDT750PP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic HDC-SDT750PP.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic HDC-SDT750PP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic HDC-SDT750PP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
