Instruction/ maintenance manual of the product ER1511 Panasonic
Go to page of 10
Operating Instructions A C/Rechargeable Prof essional Hair Clipper Model No . ER1511 Before oper ating this unit, please read these instructions completely and save them for future use .
2 Thank you f or choosing a P anasonic Hair Clipper . Please read all instructions before use. Important Before use This clipper is designed for prof essional use to trim hair and beards. Charge it for 8 hours bef ore use f or the first time in order to activate the b uilt‑in rechargeable batteries.
3 knowledge, unless they ha ve been giv en supervision or instruction concer ning use of the appliance by a person responsib le for their saf ety . Children should be supervised to ensure that they do not play with the appliance . Nev er tamper with moving par ts.
4 Charge Charging the hair c lipper 1 1 Connect the power cor d to the charging stand. 2 2 Slide the power s witch to “0·CHARGE”. 3 3 Plug in the A C adaptor into a household outlet and place the clipper on the c harging stand. Charge status ( ) lamp glows and charging starts.
5 About the LED display While charging After charging is completed 10 minutes after charging is completed HIGH MID LOW HIGH MID LOW HIGH MID LOW glows. “HIGH”, “MID” or “LOW” blinks. • blinks once ev ery second. blinks once e very 2 seconds.
6 Cut Using the hair clipper T ur n the dial clockwise or countercloc kwise to adjust the moving blade bac k and forth to get the desired height. Adjustable in 5 stages from 0.8 mm to 2.0 mm in 0.3 mm steps without attachments. The actual cut length may be longer than the set length.
7 Care Blade maintenance Removing and mounting the b lade Removing the blade 1. Hold the clipper with the switch facing upward and push the blade with y our thumb while catching the blade in y our other hand. Be sure to turn off the power before y ou remov e the blade.
8 Cleaning the blade 1. Brush off any hairs fr om the clipper and from ar ound the blade. 2. Remove the blade and brush off the hairs from the blade edge. 3. Brush the hairs out from between the stationary blade and the moving b lade while pressing down on the cleaning le ver to raise the moving blade.
9 Removing the b uilt‑in rechargeable batteries 1. Remov e the blades 1 and f our screws 2 . 2. Remov e the spring 3 , the under cover 4 , and the b lade holder 5 . 3. Remov e the dial 6 and open the housing 7 , and then take out two batteries 8 . Disconnect the clipper from a household outlet.
F EN Printed in Japan ER971015111H Y0710‑0 Panasonic Electric Works Co., Ltd. http://panasonic.net.
An important point after buying a device Panasonic ER1511 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic ER1511 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic ER1511 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic ER1511 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic ER1511 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic ER1511, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic ER1511.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic ER1511. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic ER1511 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
