Instruction/ maintenance manual of the product P5G41TD-M PRO Asus
Go to page of 60
Motherboard P5G41TD-M PRO.
ii E5153 First Edition V1 November 2009 Copyright © 2009 ASUST eK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, tr.
iii Contents Notices ......................................................................................................... vi Safety information ..................................................................................... vii About this guide .
iv Contents 1.1 1 Software support ........................................................................ 1-27 1.1 1.1 Installing an operating system ...................................... 1-27 1.1 1.2 Support DVD information .......................
v Contents 2.5.4 Anti Surge Support ........................................................ 2-15 2.5.5 APM Conguration ........................................................ 2-16 2.5.6 Hardware Monitor ...........................................
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • T o prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.
ix P5G41TD-M PRO specications summary (continued on the next page) CPU LGA775 socket for Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® dual-core / Celeron ® dual-core / Cel.
x P5G41TD-M PRO specications summary * Specications are subject to change without notice. ASUS unique features ASUS CrashFree BIOS 3 ASUS AI NET 2 ASUS Q-Fan ASUS EZ Flash 2 ASUS MyLogo 2 ASUS A.
ASUS P5G41TD-M PRO 1-1 Chapter 1 Product introduction Motherboard ASUS P5G41TD-M PRO motherboard Cables 2 x Serial A T A cables 1 x Ultra DMA 100/66/33 cable Accessories 1 x I/O shield Application DVD ASUS motherboard support DVD Documentation User Manual If any of the above items is damaged or missing, contact your retailer .
1-2 Chapter 1: Product introduction Intel ® G41 Chipset The Intel ® G41 Express Chipset is designed to support dual-channel DDR3 1333 (overclocking)/1066/800 architecture, 1333/1066/800 Front Side Bus (FSB), PCIe 1.1, and mutli-core CPUs. It especially includes Intel ® Fast memory bandwidth and reduces the latency of the memory accesses.
ASUS P5G41TD-M PRO 1-3 ASUS Express Gate Express Gate is an ASUS exclusive OS, which lets you instantly access the Internet and key applications before entering the Windows ® OS. • ASUS Express Gate supports installation on SA T A HDDs, USB HDDs and ash drives with at least 1.
1-4 Chapter 1: Product introduction 1.4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
ASUS P5G41TD-M PRO 1-5 1.5 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Ensure that you unplug the power cord before installing or removing the motherboard.
1-6 Chapter 1: Product introduction 1.5.3 Motherboard layout 1.5.4 Layout contents Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page 1. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) 1-22 8. Onboard LED (SB_PWR) 1-4 2. CPU and chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_FAN) 1-21 9.
ASUS P5G41TD-M PRO 1-7 1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium ® dual-core / Celeron ® dual-core / Celeron ® processors • Unplug all power cables before installing the CPU.
1-8 Chapter 1: Product introduction T o prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab.
ASUS P5G41TD-M PRO 1-9 6. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer .
1-10 Chapter 1: Product introduction 1.6.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel ® processor , the package includes the CPU fan and heatsink assembly .
ASUS P5G41TD-M PRO 1-1 1 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . 1.6.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1.
1-12 Chapter 1: Product introduction 1.7 System memory 1.7.1 Overview The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. The gure illustrates the location of the DDR3 DIMM sockets: Channel Sockets Channel A DIMM_A1 Channel B DIMM_B1 4.
ASUS P5G41TD-M PRO 1-13 1.7.2 Memory congurations Y ou may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. • A lways i nsta ll DIMM s wi th the same CAS lat ency . For o ptimum compati bili ty , it is reco mmended tha t you ob tain me mory mo dule s from the same ven dor .
1-14 Chapter 1: Product introduction DDR3-1333 MHz (O.C.) capability (continued on the next page) V endor Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) A* B* A-Data AD31333001GOU 1024MB SS A-Data AD30908C8D-151C E0906 - - • A-Data AD31333G001GOU 3072MB(Kit of 3) SS - - 8-8-8-24 1.
ASUS P5G41TD-M PRO 1-15 DDR3-1333 MHz (O.C.) capability SS - Single-sided / DS - Double - sided DIMM support: • A*: Supports one module inserted into any slot as Single-channel memory conguration.
1-16 Chapter 1: Product introduction 1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1.
ASUS P5G41TD-M PRO 1-17 1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards.
1-18 Chapter 1: Product introduction 1.9 Jumpers 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS P5G41TD-M PRO 1-19 1.10 Connectors 1.10.1 Rear panel connectors 1. PS/2 mouse port (green) . This port is for a PS/2 mouse. 2. Optical S/PDIF_OUT port. This port connects to an external audio output device via an optical S/PDIF cable. 3. VGA port.
1-20 Chapter 1: Product introduction 1 1. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 12. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.
ASUS P5G41TD-M PRO 1-21 2. CPU and chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector . Do not forget to connect the fan cables to the fan connectors.
1-22 Chapter 1: Product introduction 4. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS P5G41TD-M PRO 1-23 6. Serial A T A connectors (7-pin SA T A1-4) These connectors are for the Serial A T A signal cables for Serial A T A 3Gb/s hard disk and optical disk drives. The Serial A T A 3Gb/s is backward compatible with Serial A T A 1.5Gb/s specication.
1-24 Chapter 1: Product introduction 7. IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 100/66/33 signal cable. There are three connectors on each Ultra DMA 100/66/33 signal cable: blue, black, and gray .
ASUS P5G41TD-M PRO 1-25 8. System panel connector (20-8 pin P ANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector .
1-26 Chapter 1: Product introduction 9. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS P5G41TD-M PRO 1-27 1.1 1 Software support 1.1 1.1 Installing an operating system This motherboard supports Windows ® XP/Vista/7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.
1-28 Chapter 1: Product introduction.
ASUS P5G41TD-M PRO 2-1 Chapter 2 BIOS information Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future.
2-2 Chapter 2: BIOS information 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility . Before you start using this utility , download the latest BIOS le from the ASUS website at www .asus.
ASUS P5G41TD-M PRO 2-3 2.1.3 ASUS CrashFree BIOS The ASUS CrashFree BIOS is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can restore a corrupted BIOS le using the motherboard support DVD or a removable device that contains the updated BIOS le.
2-4 Chapter 2: BIOS information 2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or congure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program.
ASUS P5G41TD-M PRO 2-5 2.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguration. Advanced For changing the advanced system settings. Power For changing the advanced power management (APM) conguration.
2-6 Chapter 2: BIOS information Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2009, American, American Megatrends, Inc. BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit Suspend Mode [Auto] ACPI 2.
ASUS P5G41TD-M PRO 2-7 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 2.3.1 System Time [xx:xx:xx] Allows you to set the system time. 2.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
2-8 Chapter 2: BIOS information LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.
ASUS P5G41TD-M PRO 2-9 2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
2-10 Chapter 2: BIOS information FSB / CPU External Frequency Synchronization Front Side Bus CPU External Frequency FSB 1333 333 MHz FSB 1066 266 MHz FSB 800 200 MHz PCI Express Frequency [Auto] Allows you to select the PCI Express frequency .
ASUS P5G41TD-M PRO 2-1 1 2.4.2 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. CPU Ratio Setting [Auto] Sets the ration between CPU core clock and the FSB frequency . Conguration option: [Auto] C1E Support [Enabled] Allows you to enable or disable C1E Support.
2-12 Chapter 2: BIOS information 2.4.3 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. North Bridge Conguration Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of overlapped PCI memory above the total physical memory .
ASUS P5G41TD-M PRO 2-13 2.4.4 Onboard Devices Conguration Onboard Gigabit LAN [Enabled] Allows you to enable or disable the onboard Gigabit LAN controller . Conguration options: [Enabled] [Disabled] Onboard LAN Option ROM [Disabled] Allows you to enable or disable the boot ROM in the onboard LAN controller .
2-14 Chapter 2: BIOS information The Module V ersion and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None . USB Functions [Enabled] Allows you to disable or enable the USB functions. Conguration options: [Disabled] [Enabled] USB 2.
ASUS P5G41TD-M PRO 2-15 2.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options.
2-16 Chapter 2: BIOS information 2.5.5 APM Conguration Restore on AC Power Loss [Power Off] When set to [Power Off] , the system goes into off state after an AC power loss.
ASUS P5G41TD-M PRO 2-17 2.6.1 Boot Device Priority 1st ~ xxth Boot Device These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
2-18 Chapter 2: BIOS information AddOn ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Conguration options: [Force BIOS] [Keep Current] Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock.
ASUS P5G41TD-M PRO 2-19 After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items.
2-20 Chapter 2: BIOS information 2.7.1 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter> , a conrmation message appears. Use the left/right arrow key to select between [Y es ] or [No] , then press <Enter> to conrm your choice.
ASUS P5G41TD-M PRO 2-21 2.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit.
2-22 Chapter 2: BIOS information.
An important point after buying a device Asus P5G41TD-M PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus P5G41TD-M PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus P5G41TD-M PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus P5G41TD-M PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Asus P5G41TD-M PRO will certainly help you make a decision on the purchase.
If you already are a holder of Asus P5G41TD-M PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus P5G41TD-M PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Asus P5G41TD-M PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus P5G41TD-M PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
