Instruction/ maintenance manual of the product DMC-FP3 Panasonic
Go to page of 98
Operating Instructions for advanced features Digital Camera Model No. DMC-FP3 Before connecting, operating or adjusting this product, please read the instructions completely .
2 VQT2P49 VQT2P49 3 Quick start guide Contents The battery is not charged when the camera is shipped. Charge the battery and set the clock before use. When you do not use the card (optional), you can record or play back pictures on the built-in memory ( → 12).
2 VQT2P49 VQT2P49 3 Quick start guide Contents The battery is not charged when the camera is shipped. Charge the battery and set the clock before use. When you do not use the card (optional), you can record or play back pictures on the built-in memory ( → 12).
4 VQT2P49 VQT2P49 5 Before use Contents (Continued) ■ Fully peel off the strip of tape from the lens cover before using the camera. Strip of tape ■ Do a test shot first! Check first to see if you can take pictures and record sounds successfully . ■ We will not compensate for failed/ lost recording or for direct/indirect damage.
4 VQT2P49 VQT2P49 5 Before use Contents (Continued) ■ Fully peel off the strip of tape from the lens cover before using the camera. Strip of tape ■ Do a test shot first! Check first to see if you can take pictures and record sounds successfully . ■ We will not compensate for failed/ lost recording or for direct/indirect damage.
6 VQT2P49 VQT2P49 7 Names of parts Before use (Continued) Microphone ( → 51) ■ Lens • Do not leave the lens exposed to direct sunlight. ■ When using a tripod or unipod • Do not apply excessive force or tighten screws when they are crooked. (This may damage the camera, screw hole, or label.
6 VQT2P49 VQT2P49 7 Names of parts Before use (Continued) Microphone ( → 51) ■ Lens • Do not leave the lens exposed to direct sunlight. ■ When using a tripod or unipod • Do not apply excessive force or tighten screws when they are crooked. (This may damage the camera, screw hole, or label.
8 VQT2P49 VQT2P49 9 Charging battery Using theT ouch Panel Always charge before first use! (not sold pre-charged) ■ About batteries that you can use with this unit It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets.
8 VQT2P49 VQT2P49 9 Charging battery Using theT ouch Panel Always charge before first use! (not sold pre-charged) ■ About batteries that you can use with this unit It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets.
10 VQT2P49 VQT2P49 1 1 Inserting and removing the card (optional)/ the battery Charging battery (Continued) T urn the camera off and slide the release lever to [OPEN] before opening the lid [OPEN] [LOCK] Release lever Completely insert battery and card • Battery: Insert until the lever locks into place.
10 VQT2P49 VQT2P49 1 1 Inserting and removing the card (optional)/ the battery Charging battery (Continued) T urn the camera off and slide the release lever to [OPEN] before opening the lid [OPEN] [LOCK] Release lever Completely insert battery and card • Battery: Insert until the lever locks into place.
12 VQT2P49 VQT2P49 13 Setting the clock Inserting and removing the card (optional)/ the battery (Continued) Open the lens cover The power is turned on.
12 VQT2P49 VQT2P49 13 Setting the clock Inserting and removing the card (optional)/ the battery (Continued) Open the lens cover The power is turned on.
14 VQT2P49 VQT2P49 15 Setting the menu Setting the clock (Continued) There are a number of functions you can use and settings you can change from the various menus to help you get more use from your camera. ● Settings display may vary according to items.
14 VQT2P49 VQT2P49 15 Setting the menu Setting the clock (Continued) There are a number of functions you can use and settings you can change from the various menus to help you get more use from your camera. ● Settings display may vary according to items.
16 VQT2P49 VQT2P49 17 Setting the menu (Continued) T ouch a menu item • T ouch ▲▼ on the screen to change the page. Zoom lever can be used to change the page. • T ouch [EXIT] to return to the original screen. T ouch the settings you wish to change The setting is changed.
16 VQT2P49 VQT2P49 17 Setting the menu (Continued) T ouch a menu item • T ouch ▲▼ on the screen to change the page. Zoom lever can be used to change the page. • T ouch [EXIT] to return to the original screen. T ouch the settings you wish to change The setting is changed.
18 VQT2P49 VQT2P49 19 Using [SETUP] menu For details about the setting procedure in the [SETUP] menu. ( → 15) [CLOCK SET] Set the date and time. ( → 13) Set time, date, and display format. [WORLD TIME] Set the local time at travel destination. ( → 54) [DESTINA TION]: Set the local time at travel destination.
18 VQT2P49 VQT2P49 19 Using [SETUP] menu For details about the setting procedure in the [SETUP] menu. ( → 15) [CLOCK SET] Set the date and time. ( → 13) Set time, date, and display format. [WORLD TIME] Set the local time at travel destination. ( → 54) [DESTINA TION]: Set the local time at travel destination.
20 VQT2P49 VQT2P49 21 Using [SETUP] menu (Continued) For details about the setting procedure in the [SETUP] menu. ( → 15) [AUTO POWER OFF] The camera turns off automatically after a specified period of inactivity . [OFF] / [2 MIN.] / [5 MIN.] / [10 MIN.
20 VQT2P49 VQT2P49 21 Using [SETUP] menu (Continued) For details about the setting procedure in the [SETUP] menu. ( → 15) [AUTO POWER OFF] The camera turns off automatically after a specified period of inactivity . [OFF] / [2 MIN.] / [5 MIN.] / [10 MIN.
22 VQT2P49 VQT2P49 23 Using [SETUP] menu (Continued) For details about the setting procedure in the [SETUP] menu. ( → 15) [VIDEO OUT] ∗ Change the video output format when connected to a TV , etc. (Playback Mode only). [NTSC]/[P AL] • Operates when A V cable is connected.
22 VQT2P49 VQT2P49 23 Using [SETUP] menu (Continued) For details about the setting procedure in the [SETUP] menu. ( → 15) [VIDEO OUT] ∗ Change the video output format when connected to a TV , etc. (Playback Mode only). [NTSC]/[P AL] • Operates when A V cable is connected.
24 VQT2P49 VQT2P49 25 Please set the clock before recording. ( → 13) Sequence of Recording Open the lens cover The power is turned on. Select the desired Recording Mode and record ■ T o use settings automatically selected by the camera Press the button.
24 VQT2P49 VQT2P49 25 Please set the clock before recording. ( → 13) Sequence of Recording Open the lens cover The power is turned on. Select the desired Recording Mode and record ■ T o use settings automatically selected by the camera Press the button.
26 VQT2P49 VQT2P49 27 T aking pictures with automatic settings [INTELLIGENT AUTO] Mode Recording Mode: Open the lens cover The power is turned on. Select [INTELLIGENT AUT O] Mode • Press again to return to the previous Recording Mode.
26 VQT2P49 VQT2P49 27 T aking pictures with automatic settings [INTELLIGENT AUTO] Mode Recording Mode: Open the lens cover The power is turned on. Select [INTELLIGENT AUT O] Mode • Press again to return to the previous Recording Mode.
28 VQT2P49 VQT2P49 29 T aking pictures with your own settings [NORMAL PICTURE] Mode Recording Mode: ■ T o use zoom ( → 30) ■ T o use flash ( → 36) ■ T o adjust picture brightness ( → 41) .
28 VQT2P49 VQT2P49 29 T aking pictures with your own settings [NORMAL PICTURE] Mode Recording Mode: ■ T o use zoom ( → 30) ■ T o use flash ( → 36) ■ T o adjust picture brightness ( → 41) .
30 VQT2P49 VQT2P49 31 T aking pictures with zoom Recording Mode: Zoom In/Out Capture a wider area (wide-angle) Enlarge the subject (telephoto) W side (wide-angle): 1 x T side (telephoto): up to 4 x Focus range Zoom ratio (approx.) Zoom bar ● Adjust the focus after adjusting the zoom.
30 VQT2P49 VQT2P49 31 T aking pictures with zoom Recording Mode: Zoom In/Out Capture a wider area (wide-angle) Enlarge the subject (telephoto) W side (wide-angle): 1 x T side (telephoto): up to 4 x Focus range Zoom ratio (approx.) Zoom bar ● Adjust the focus after adjusting the zoom.
32 VQT2P49 VQT2P49 33 V iewing your pictures [NORMAL PLA Y] Playback Mode: Deleting pictures Playback Mode: Press the Playback button • Press again to enter the Recording Mode. Scroll through pictures File number Picture number/ T otal pictures Previous Next • Press the shutter button to switch to Recording Mode.
32 VQT2P49 VQT2P49 33 V iewing your pictures [NORMAL PLA Y] Playback Mode: Deleting pictures Playback Mode: Press the Playback button • Press again to enter the Recording Mode. Scroll through pictures File number Picture number/ T otal pictures Previous Next • Press the shutter button to switch to Recording Mode.
34 VQT2P49 VQT2P49 35 Changing recording information display T aking pictures with self-timer Recording Mode: Y ou can switch between various information shown on the LCD monitor , such as guide lines and recording information. ■ Guide lines • Reference for composition (e.
34 VQT2P49 VQT2P49 35 Changing recording information display T aking pictures with self-timer Recording Mode: Y ou can switch between various information shown on the LCD monitor , such as guide lines and recording information. ■ Guide lines • Reference for composition (e.
36 VQT2P49 VQT2P49 37 T aking pictures with flash Recording Mode: T ouch on the Quick menu ( → 17) • Y ou can also set by touching [FLASH] in the [REC] menu T ouch the type of flash • T ouch [EXIT] to return to the original screen. ● Stand at least 1 m (3.
36 VQT2P49 VQT2P49 37 T aking pictures with flash Recording Mode: T ouch on the Quick menu ( → 17) • Y ou can also set by touching [FLASH] in the [REC] menu T ouch the type of flash • T ouch [EXIT] to return to the original screen. ● Stand at least 1 m (3.
38 VQT2P49 VQT2P49 39 T aking close-up pictures Recording Mode: ● In [MACRO ZOOM], higher magnification results in lower picture quality . ● When zoomed macro is specified, Extended Optical Zoom is disabled. ● We recommend using a tripod, [SELFTIMER], or setting [FLASH] to [FORCED FLASH OFF].
38 VQT2P49 VQT2P49 39 T aking close-up pictures Recording Mode: ● In [MACRO ZOOM], higher magnification results in lower picture quality . ● When zoomed macro is specified, Extended Optical Zoom is disabled. ● We recommend using a tripod, [SELFTIMER], or setting [FLASH] to [FORCED FLASH OFF].
40 VQT2P49 VQT2P49 41 T aking pictures with exposure compensation Recording Mode: T aking pictures with the T ouched Area in Focus (T ouch AF Area Selection) Recording Mode: Corrects exposure when adequate exposure cannot be obtained (if difference between brightness of object and background, etc.
40 VQT2P49 VQT2P49 41 T aking pictures with exposure compensation Recording Mode: T aking pictures with the T ouched Area in Focus (T ouch AF Area Selection) Recording Mode: Corrects exposure when adequate exposure cannot be obtained (if difference between brightness of object and background, etc.
42 VQT2P49 VQT2P49 43 T aking pictures according to the scene [SCENE MODE] Recording Mode: Using flash in Scene Modes ( → 37) [PORTRAIT] Improves the skin tone of subjects for a healthier appearance in bright daylight conditions. T ips • Stand as close as possible to subject.
42 VQT2P49 VQT2P49 43 T aking pictures according to the scene [SCENE MODE] Recording Mode: Using flash in Scene Modes ( → 37) [PORTRAIT] Improves the skin tone of subjects for a healthier appearance in bright daylight conditions. T ips • Stand as close as possible to subject.
44 VQT2P49 VQT2P49 45 T aking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene ( → 42) Using flash in Scene Modes ( → 37) Scene Uses, Tips Notes [SELF PORTRAIT] T ake pictures of yourself.
44 VQT2P49 VQT2P49 45 T aking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene ( → 42) Using flash in Scene Modes ( → 37) Scene Uses, Tips Notes [SELF PORTRAIT] T ake pictures of yourself.
46 VQT2P49 VQT2P49 47 T aking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene ( → 42) Using flash in Scene Modes ( → 37) Scene Uses, Tips Notes [BABY] Uses weak flash to bring out skin colors. • T o record age and name ([BABY1] and [BABY2] can be set separately .
46 VQT2P49 VQT2P49 47 T aking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene ( → 42) Using flash in Scene Modes ( → 37) Scene Uses, Tips Notes [BABY] Uses weak flash to bring out skin colors. • T o record age and name ([BABY1] and [BABY2] can be set separately .
48 VQT2P49 VQT2P49 49 T aking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene ( → 42) Using flash in Scene Modes ( → 37) Scene Uses, Tips Notes [FLASH BURST] Enables continuous recording in dim locations.
48 VQT2P49 VQT2P49 49 T aking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene ( → 42) Using flash in Scene Modes ( → 37) Scene Uses, Tips Notes [FLASH BURST] Enables continuous recording in dim locations.
50 VQT2P49 VQT2P49 51 Registering commonly used scenes [MY SCENE MODE] Recording Mode: T aking motion pictures [MOTION PICTURE] Mode Recording Mode: ● For details on the preset scene, see the pages on Scene Mode. ( → 42) ● If recording settings are reset by [RESET] in the [SETUP] menu, the preset Scene Mode is cleared.
50 VQT2P49 VQT2P49 51 Registering commonly used scenes [MY SCENE MODE] Recording Mode: T aking motion pictures [MOTION PICTURE] Mode Recording Mode: ● For details on the preset scene, see the pages on Scene Mode. ( → 42) ● If recording settings are reset by [RESET] in the [SETUP] menu, the preset Scene Mode is cleared.
52 VQT2P49 VQT2P49 53 T aking motion pictures [MOTION PICTURE] Mode (Continued) Recording Mode: Useful features for travel Recording Mode: ∗ ∗ Recording only . (Cannot set.) [REC QUALITY] When recording motion picture, use a card rated with an SD speed class ∗ of ‘Class 6’ or higher .
52 VQT2P49 VQT2P49 53 T aking motion pictures [MOTION PICTURE] Mode (Continued) Recording Mode: Useful features for travel Recording Mode: ∗ ∗ Recording only . (Cannot set.) [REC QUALITY] When recording motion picture, use a card rated with an SD speed class ∗ of ‘Class 6’ or higher .
54 VQT2P49 VQT2P49 55 Useful features for travel (Continued) Recording Mode: ∗ ∗ Recording only . (Cannot set.) ● The number of days elapsed is displayed for approx. 5 sec. when switching from Playback to Recording Mode or when power is turned on.
54 VQT2P49 VQT2P49 55 Useful features for travel (Continued) Recording Mode: ∗ ∗ Recording only . (Cannot set.) ● The number of days elapsed is displayed for approx. 5 sec. when switching from Playback to Recording Mode or when power is turned on.
56 VQT2P49 VQT2P49 57 Using [REC] menu For details about the setting procedure in the [REC] menu ( → 15) For details about the setting procedure in the [REC] menu ( → 15) ‘Quick menu’ ( → 17) is useful to easily call up frequently-used menus.
56 VQT2P49 VQT2P49 57 Using [REC] menu For details about the setting procedure in the [REC] menu ( → 15) For details about the setting procedure in the [REC] menu ( → 15) ‘Quick menu’ ( → 17) is useful to easily call up frequently-used menus.
58 VQT2P49 VQT2P49 59 Using [REC] menu (Continued) For details about the setting procedure in the [REC] menu ( → 15) [AF MODE] Method of aligning focus can be changed according to position and number of subjects.
58 VQT2P49 VQT2P49 59 Using [REC] menu (Continued) For details about the setting procedure in the [REC] menu ( → 15) [AF MODE] Method of aligning focus can be changed according to position and number of subjects.
60 VQT2P49 VQT2P49 61 Using [REC] menu (Continued) For details about the setting procedure in the [REC] menu ( → 15) [EXPOSURE] For details about the setting ( → 41) [BURST] Enables a rapid succession of still pictures to be taken. Succession of still pictures taken while shutter button is held down.
60 VQT2P49 VQT2P49 61 Using [REC] menu (Continued) For details about the setting procedure in the [REC] menu ( → 15) [EXPOSURE] For details about the setting ( → 41) [BURST] Enables a rapid succession of still pictures to be taken. Succession of still pictures taken while shutter button is held down.
62 VQT2P49 VQT2P49 63 Using [REC] menu (Continued) Entering T ext [AF ASSIST LAMP] Illuminates lamp when dark to facilitate focus alignment. ■ Mode: Lamp: Effective distance: 1.5 m (4.92 feet) (Do not cover or look at lamp from close range) ■ Settings: [OFF] : Lamp off (taking pictures of animals in dark, etc.
62 VQT2P49 VQT2P49 63 Using [REC] menu (Continued) Entering T ext [AF ASSIST LAMP] Illuminates lamp when dark to facilitate focus alignment. ■ Mode: Lamp: Effective distance: 1.5 m (4.92 feet) (Do not cover or look at lamp from close range) ■ Settings: [OFF] : Lamp off (taking pictures of animals in dark, etc.
64 VQT2P49 VQT2P49 65 V iewing as list (Multi playback/Calendar playback) Playback Mode: W atching motion pictures Playback Mode: Y ou can view 9 (or 18) pictures at once (Multi playback), or view all pictures taken on a certain date (Calendar playback).
64 VQT2P49 VQT2P49 65 V iewing as list (Multi playback/Calendar playback) Playback Mode: W atching motion pictures Playback Mode: Y ou can view 9 (or 18) pictures at once (Multi playback), or view all pictures taken on a certain date (Calendar playback).
66 VQT2P49 VQT2P49 67 Different playback methods (Playback Mode) Playback Mode: Recorded pictures can be played back in a variety of ways. ■ [NORMAL PLA Y] ( → 32) ■ [SLIDE SHOW] ( → 67) ■ [.
66 VQT2P49 VQT2P49 67 Different playback methods (Playback Mode) Playback Mode: Recorded pictures can be played back in a variety of ways. ■ [NORMAL PLA Y] ( → 32) ■ [SLIDE SHOW] ( → 67) ■ [.
68 VQT2P49 VQT2P49 69 For details about the switching Playback Mode procedure ( → 66) Different playback methods (Playback Mode) (Continued) Playback Mode: [CA TEGORY PLA Y] Pictures can be classified automatically and viewed by category . Automatic classification starts when [CA TEGORY PLA Y] is selected from the Playback Mode selection menu.
68 VQT2P49 VQT2P49 69 For details about the switching Playback Mode procedure ( → 66) Different playback methods (Playback Mode) (Continued) Playback Mode: [CA TEGORY PLA Y] Pictures can be classified automatically and viewed by category . Automatic classification starts when [CA TEGORY PLA Y] is selected from the Playback Mode selection menu.
70 VQT2P49 VQT2P49 71 Using [PLA YBACK] menu Playback Mode: For details about the setting procedure in the [PLA YBACK] menu ( → 15) For details about the setting procedure in the [PLA YBACK] menu ( → 15) [TEXT ST AMP] Stamps the recording date or text you have registered in the [BABY] and [PET] Scene Modes or [TRA VEL DA TE] on still pictures.
70 VQT2P49 VQT2P49 71 Using [PLA YBACK] menu Playback Mode: For details about the setting procedure in the [PLA YBACK] menu ( → 15) For details about the setting procedure in the [PLA YBACK] menu ( → 15) [TEXT ST AMP] Stamps the recording date or text you have registered in the [BABY] and [PET] Scene Modes or [TRA VEL DA TE] on still pictures.
72 VQT2P49 VQT2P49 73 For details about the setting procedure in the [PLA YBACK] menu ( → 15) Using [PLA YBACK] menu (Continued) Playback Mode: ■ When the description is ON ( ) When the recording pixel level after resizing is touched, a description is displayed.
72 VQT2P49 VQT2P49 73 For details about the setting procedure in the [PLA YBACK] menu ( → 15) Using [PLA YBACK] menu (Continued) Playback Mode: ■ When the description is ON ( ) When the recording pixel level after resizing is touched, a description is displayed.
74 VQT2P49 VQT2P49 75 Using [PLA YBACK] menu (Continued) Playback Mode: For details about the setting procedure in the [PLA YBACK] menu ( → 15) [PRINT SET] Picture/picture no./date printing settings can be made for when printing with DPOF print- compatible shops or printers.
74 VQT2P49 VQT2P49 75 Using [PLA YBACK] menu (Continued) Playback Mode: For details about the setting procedure in the [PLA YBACK] menu ( → 15) [PRINT SET] Picture/picture no./date printing settings can be made for when printing with DPOF print- compatible shops or printers.
76 VQT2P49 VQT2P49 77 Using [PLA YBACK] menu (Continued) Playback Mode: For details about the setting procedure in the [PLA YBACK] menu ( → 15) [PROTECT] Set protection to disable picture deletion.
76 VQT2P49 VQT2P49 77 Using [PLA YBACK] menu (Continued) Playback Mode: For details about the setting procedure in the [PLA YBACK] menu ( → 15) [PROTECT] Set protection to disable picture deletion.
78 VQT2P49 VQT2P49 79 Using with your PC Some computers can read directly from the camera’s memory card. For details, see the manual for your computer .
78 VQT2P49 VQT2P49 79 Using with your PC Some computers can read directly from the camera’s memory card. For details, see the manual for your computer .
80 VQT2P49 VQT2P49 81 Some printers can print directly from the camera’s memory card. For details, see the manual for your printer . Printing ■ T o cancel print Press [MENU] ● Do not use any other USB connection cables except the supplied one. ● Disconnect USB connection cable after printing.
80 VQT2P49 VQT2P49 81 Some printers can print directly from the camera’s memory card. For details, see the manual for your printer . Printing ■ T o cancel print Press [MENU] ● Do not use any other USB connection cables except the supplied one. ● Disconnect USB connection cable after printing.
82 VQT2P49 VQT2P49 83 Printing (Continued) V iewing on TV screen Making print settings on camera (Make settings before selecting [PRINT ST ART]) Select item Select setting Item Settings [PRINT WITH DA TE] [OFF]/[ON] [NUM. OF PRINTS] Set number of pictures (up to 999 pictures) [P APER SIZE] (printer takes priority) [L/3.
82 VQT2P49 VQT2P49 83 Printing (Continued) V iewing on TV screen Making print settings on camera (Make settings before selecting [PRINT ST ART]) Select item Select setting Item Settings [PRINT WITH DA TE] [OFF]/[ON] [NUM. OF PRINTS] Set number of pictures (up to 999 pictures) [P APER SIZE] (printer takes priority) [L/3.
84 VQT2P49 VQT2P49 85 Press the [DISPLA Y] button to change display ( → 7, 34). List of LCD monitor displays In recording 1 Recording Mode ( → 24) Flash mode ( → 36) Optical Image Stabilizer ( .
84 VQT2P49 VQT2P49 85 Press the [DISPLA Y] button to change display ( → 7, 34). List of LCD monitor displays In recording 1 Recording Mode ( → 24) Flash mode ( → 36) Optical Image Stabilizer ( .
86 VQT2P49 VQT2P49 87 Meanings and required responses to major messages displayed on LCD monitor . Message displays [THIS MEMOR Y CARD CANNOT BE USED] ● A MultiMediaCard was inserted. → Not compatible with the camera. Use a compatible card. [THIS MEMOR Y CARD IS WRITE-PROTECTED] ● Unlock the write-protect switch on the card.
86 VQT2P49 VQT2P49 87 Meanings and required responses to major messages displayed on LCD monitor . Message displays [THIS MEMOR Y CARD CANNOT BE USED] ● A MultiMediaCard was inserted. → Not compatible with the camera. Use a compatible card. [THIS MEMOR Y CARD IS WRITE-PROTECTED] ● Unlock the write-protect switch on the card.
88 VQT2P49 VQT2P49 89 T ry checking these items ( → 88 - 93) first. (Restoring menu settings to default values may solve certain problems. T ry using [RESET] in [SETUP] menu in Recording Mode ( → 21).) Q&A T roubleshooting Battery , power Camera does not work even if power is turned on.
88 VQT2P49 VQT2P49 89 T ry checking these items ( → 88 - 93) first. (Restoring menu settings to default values may solve certain problems. T ry using [RESET] in [SETUP] menu in Recording Mode ( → 21).) Q&A T roubleshooting Battery , power Camera does not work even if power is turned on.
90 VQT2P49 VQT2P49 91 Q&A T roubleshooting (Continued) LCD monitor LCD monitor dims during motion picture recording. ● LCD monitor may dim if continuing motion picture recording for long periods. Monitor sometimes shuts off even though power is on.
90 VQT2P49 VQT2P49 91 Q&A T roubleshooting (Continued) LCD monitor LCD monitor dims during motion picture recording. ● LCD monitor may dim if continuing motion picture recording for long periods. Monitor sometimes shuts off even though power is on.
92 VQT2P49 VQT2P49 93 Q&A T roubleshooting (Continued) TV , computer , printer No pictures appears on TV . Pictures blurred or not colored. ● Not connected correctly . ( → 83) ● The television has not been switched to auxiliary input. ● The television does not support the type of card used.
92 VQT2P49 VQT2P49 93 Q&A T roubleshooting (Continued) TV , computer , printer No pictures appears on TV . Pictures blurred or not colored. ● Not connected correctly . ( → 83) ● The television has not been switched to auxiliary input. ● The television does not support the type of card used.
94 VQT2P49 VQT2P49 95 Usage cautions and notes When in use ● Camera may become warm if used for long periods of time, but this is not a fault. ● T o avoid jitter , use a tripod and place in a stable location.
94 VQT2P49 VQT2P49 95 Usage cautions and notes When in use ● Camera may become warm if used for long periods of time, but this is not a fault. ● T o avoid jitter , use a tripod and place in a stable location.
96 VQT2P49 VQT2P49 97 Recording picture/time capacity ● Figures given are estimates. May vary according to conditions, card type, and subject. ● Recording capacities/times displayed on LCD monitor may not be reduced regularly .
96 VQT2P49 VQT2P49 97 Recording picture/time capacity ● Figures given are estimates. May vary according to conditions, card type, and subject. ● Recording capacities/times displayed on LCD monitor may not be reduced regularly .
• SDXC Logo is a trademark of SD-3C, LLC. • QuickT ime and the QuickT ime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. • Other names, company names, and product names printed in these instructions are trademarks or registered trademarks of the companies concerned.
An important point after buying a device Panasonic DMC-FP3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic DMC-FP3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic DMC-FP3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic DMC-FP3 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic DMC-FP3 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic DMC-FP3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic DMC-FP3.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic DMC-FP3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic DMC-FP3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
