Instruction/ maintenance manual of the product P4P800S Asus
Go to page of 82
Motherboard P4P800S.
2 T1398 © 2003.
3.
4.
5 • • • • • • • • • • • •.
6 • • •.
7 ™ Jumper Free (Default) 23 Jumper Mode 12 P4P800S-TAYZ 10839 11036 60 99XX99XX99.
8.
9 ® ® ® ® ® ®.
10.
1-1.
1-2 ® ® ® ®.
1-3 ®.
1-4 • • • •.
1-5 18 28 25 21 22 23 24 19 20 26 27 6 4 3 5 8 2 12 17 16 15 14 1 7 13 10 11 9.
1-6 ® ®.
1-7.
1-8 P ANEL1 P4P800S ® CD1 AUX1 CPU_F AN1 FP_AUDIO1 GAME1 CLRTC1 CHA_F AN1 USB56 SB_PWR1 USBPW78 20.8cm( 8.2in) 30.5cm (12.0in) COM1 A TX12V1 Socket 478 USB78 S ATA 1 S ATA 2 USBPW56 MODEM1 WIFI USBPW.
1-9 P4P800S ® P4P800S Onboard LED SB_PWR1 ON Standby Power OFF Powered Off.
1-10.
1-11 ® ® ® ® ® ® ®.
1-12 ® ® ® ® ® ® 90 - 100.
1-13 P4P800S ® P4P800S 184-Pin DDR DIMM Sockets 80 Pins 104 Pins DIMM1 DIMM2.
1-14.
1-15.
1-16 ABCDE FG H.
1-17 P4P800S ® P4P800S Accelerated Graphics Port (AGP) Keyed for 1.5v.
1-18 P4P800S ® P4P800S Wi-Fi Slot WIFI.
1-19 P4P800S ® P4P800S USB Device W ake Up 3 2 2 1 +5V (Default) +5VSB USBPW78 USBPW56 3 2 2 1 +5V (Default) +5VSB USBPW12 USBPW34 P4P800S ® P4P800S Keyboard Power Setting (Default) +5V +5VSB KBPWR1.
1-20 P4P800S ® P4P800S Clear RTC RAM CLRTC1 Normal Clear CMOS (Default) 12 23.
1-21 P4P800S ® P4P800S Floppy Disk Drive Connector FLOPPY1 PIN 1 P4P800S ® P4P800S A TX Power Connectors A TXPWR1 Pin 1 +3.3VDC -12.0VDC COM PS_ON# COM COM COM -5.
1-22 P4P800S ® P4P800S SA T A Connectors S ATA 1 GND RSAT A_TXP1 RSAT A_TXN1 GND RSAT A_RXN1 RSAT A_RXP1 GND S ATA 2 GND RSAT A_TXP2 RSAT A_TXN2 GND RSAT A_RXN2 RSAT A_RXP2 GND • • •.
1-23.
1-24 P4P800S ® P4P800S IDE Connectors SEC_IDE1 PRI_IDE1 PIN 1 PIN 1.
1-25 P4P800S ® P4P800S Chassis Alarm Lead CHASSIS1 +5VSB_MB Chassis Signal GND (Default) P4P800S ® P4P800S 12-V olt Fan Connectors CPU_F AN1 CHA_F AN1 GND Rotation +12V GND Rotation +12V.
1-26 P4P800S ® P4P800S USB 2.0 Header USB56 USB+5V USB_P6- USB_P6+ GND NC USB+5V USB_P5- USB_P5+ GND 1 USB78 USB+5V USB_P8- USB_P8+ GND NC USB+5V USB_P7- USB_P7+ GND 1 P4P800S ® P4P800S Internal Aud.
1-27 P4P800S ® P4P800S Game Connector GAME1 +5V +5V J2B1 J2CX MIDI_OUT J2CY J2B2 MIDI_IN J1B1 J1CX GND GND J1CY J1B2 +5V P4P800S ® P4P800S Front Panel Audio Connector FP_AUDIO1 BLINE_OUT_L MIC2 Line.
1-28 • • • • • P4P800S ® P4P800S System Panel Connector * Requires an ATX power supply . PLED- PWR +5V Speaker Speaker Connector Power LED Ground Reset SW Ground Reset Ground Ground A TX Po.
2-1.
2-2.
2-3 A:>afudos /iP4P800S.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done Erasing flash .... done Writing flash .... 0x0008CC00 (9%) A:>afudos /iP4P800S.rom AMI Firmware Update Utility - Version 1.
2-4 A:>afudos /oMYBIOS03.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done A:> A:>afudos /oMYBIOS03.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc.
2-5 User recovery requested. Starting BIOS recovery... Checking for floppy... • • User recovery requested. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “P4P800S.rom”. Completed. Start flashing... Flashed successfully.
2-6 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “ P4P800S.rom ” . Completed. Start flashing... Bad BIOS checksum.
2-7 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file “ P4P800S.rom ” . Completed. Start flashing.
2-8.
2-9 System Time [11:10:19] System Date [Thu 03/27/2003] Legacy Diskette A [1.44M, 3.5 in] Primary IDE Master :[ST320413A] Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Seconda.
2-10 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Advanced Chipset settings WARNING: Setting wrong values in the sections below may cause system to malfunction.
2-11 System Time [11:10:19] System Date [Thu 03/27/2003] Legacy Diskette A [1.44M, 3.5 in] Primary IDE Master :[ST320413A] Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Second.
2-12 Device : Hard Disk Vendor : ST320413A Size : 20.0GB LBA Mode : Supported Block Mode : 16 Sectors PIO Mode : Supported Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring: Supported Select the type of device connected to the system.
2-13 IDE Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Onboard IDE Operate Mode [Enhanced Mode] Enhanced Mode Support On [P-ATA] IDE Detect Time O.
2-14.
2-15 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit AMI BIOS Version : 08.00.08 Build Date : 08/01/03 Processor Type : Intel(R) Pentium(R) 4 CPU 1.
2-16 JumperFree Configuration CPU Configuration Chipset Onboard Devices Configuration PCI PnP USB Configuration Instant Music Configuration Configure CPU.
2-17 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit AI Overclock Tuner [Manual] CPU External Frequency (MHz) [100] DRAM Frequency [Auto] AGP/PCI Frequency (MHz) .
2-18.
2-19 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Manufacturer : Intel(R) Brand String : Intel(R) Pentium(R) 4 CPU 1.
2-20.
2-21 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit OnBoard AC’97 Audio [Auto] OnBoard LAN [Enabled] OnBoard LAN Boot ROM [Disabled] Serial Port1 Address [3F8/.
2-22.
2-23 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Plug and Play OS [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] PCI IDE BusMaster [Enabled] Advanced PCI/PnP settings WARNING: Setting wrong values in the sections below may cause system to malfunction.
2-24 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Module Version : 2.22.4-5.3 USB Devices Enabled : None USB Function [8 USB Ports] Legacy USB Support [Auto] USB 2.0 Controller [Enabled] USB 2.0 Controller Mode [HiSpeed] USB Mass Storage Device Configuration USB Configuration Enables USB host controllers.
2-25 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit USB Mass Storage Reset Delay [20 Sec] No USB Mass Storage device detected Device #1 N/A Emulation Type [N/A] .
2-26 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Instant Music [Disabled] Instant Music Option Disable/Enable Instant Music feature.
2-27 Suspend Mode [Auto] Repost Video on S3 Resume [No] ACPI 2.0 Support [No] ACPI APIC Support [Enabled] BIOS -> AML ACPI table [Enabled] APM Configuration Hardware Monitor Configure CPU.
2-28 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Power Management/APM [Enabled] Video Power Down Mode [Suspend] Hard Disk Power Down Mode [Suspend] Suspend Ti.
2-29.
2-30 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit CPU Temperature [44 ° C/111 ° F] MB Temperature [36 ° C/96.5 ° F] CPU Fan Speed [2250RPM] Chassis Fan Speed [XXX RPM] VCORE Voltage [1.550V] 3.3V Voltage [3.
2-31 Boot Device Priority Removable Drives Boot Settings Configuration Security Specifies the Boot Device Priority sequence. Boot Settings Select Screen Select Item Enter Go to Sub-screen F1 General H.
2-32 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 1st Drive [1st FLOPPY DRIVE] 2nd Drive [PM-ST320413A] 3rd Drive [PS-ASUS CD-S340] Removable Drives Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu.
2-33.
2-34 Supervisor Password :Installed User Password :Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup] Boot Sector Viru.
2-35.
2-36 Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes. F10 key can be used for this operation.
2-37.
2-38.
3-1.
3-2.
3-3.
3-4.
3-5.
3-6 Esc F1 F2 F3 F4 F5 F6 F7 F8.
An important point after buying a device Asus P4P800S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus P4P800S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus P4P800S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus P4P800S you will learn all the available features of the product, as well as information on its operation. The information that you get Asus P4P800S will certainly help you make a decision on the purchase.
If you already are a holder of Asus P4P800S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus P4P800S.
However, one of the most important roles played by the user manual is to help in solving problems with Asus P4P800S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus P4P800S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
