Instruction/ maintenance manual of the product CT 34WX52 Panasonic
Go to page of 72
Wide Screen TV Operating Instructions Model No. English CT -30WX52 CT -34WX52 TQBC0385-1 A C T I O N 123 456 78 0 9 T V D T V CBL AUX D V D V C R D B S R C V R POWER CH CH VOL VOL PLAY R-TUNE PROG GUI.
2 W ARNING: 1) T o prevent electric shock, do not remove cover . No user serviceable parts inside. Refer servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug.
3 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to.
4 Dear Panasonic Customer FCC CAUTION: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this TV not expressly approved by Matsushita Electric Corporation of America could result in harmful interference and would void the user ’ s authority to operate this device.
5 T able of Contents Important Safety Instructions ....................................... 3 Installation ...................................................................... 6 Receiver Location ......................................................
6 The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, video cables should utilize 75 ohm coaxial shielded wire.
7 Remote Control Battery Installation Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Observe the following precautions: 1. Batteries should always be replaced as a pair .
8 Cable Connection Connecting the Aerial cable to the RF In T erminal S-VIDEO AUDIO COMPONENT VIDEO INPUT INPUT P B P R Y VIDEO R L TO AUDIO AMP R L 12 12 3 VIDEO PROG OUT ANT1 ANT2 SPLIT OUT Notes: (1) T o obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating plug are required.
9 Cable Connection Follow this diagram when connecting your television to a cable box only . Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the cable box (see page 66). Procedure 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
10 Cable Connection Follow this diagram when connecting your television to a VCR only . Note: The remote control must be programmed with supplied codes to operate the VCR (see page 64, 65). Procedure 1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
11 Procedure • Option A 1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 2. Begin the video. • Option B 1. Select ANT2 in the SET UP menu under Prog Chan. 2. T une the television to Channel 3 or 4, depending on your VCR.
12 Cable Connection Follow this diagram when connecting your television to both a VCR and a cable box. Note: T o use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu under Prog Chan (see page 23).
13 Notes: (1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals. Input 4 is located on the front of the unit. Select the desired VIDEO input position by pressing the TV/VIDEO button.
14 Cable Connection Digital TV - Set-T op Box (DTV -STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV T uner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y , P B , P R ) of the television.
15 S-VIDEO VIDEO L - AUDIO - R INPUT 4 ACTION TV/VIDEO VOLUME HPJ CHANNEL Cable Connection Program Out Connection (PROG OUT) T o use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television.
16 Illuminated Remote Control Location of Controls Power button Press to turn the TV ON or OFF (See page 18). Note: The TV ’ s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). R-TUNE button Switches to previously viewed channel or video mode.
17 A C T I O N 123 456 78 0 9 TV DTV CBL AUX DVD VCR DBS RCVR POWER CH CH VOL VOL PLA Y R-TUNE PROG GUIDE RECALL SAP P AGE EXIT PIP SPLIT MOVE SWAP STOP P AUSE REC PIP MAX FF PIP MIN REW BBE MENU FREE.
18 Power ON / OFF Note: Main plug types vary between countries. The power plug shown at left may , therefore, not be the type fitted to your set. Press the POWER switch on the TV to turn the set on. POWER-ON: Red When the set is on press the POWER switch on the TV to turn the set off.
19 S-VIDEO VIDEO L - AUDIO - R INPUT 4 ACTION TV/VIDEO VOLUME HPJ CHANNEL S-VIDEO VIDEO L - AUDIO - R INPUT 4 ACTION TV/VIDEO VOLUME HPJ CHANNEL VHF , UHF and CA TV Power switch Remote control sensor Operation can be done from the TV set. • Channel selectors • V olume adjusters Press to turn the TV on (See page 18).
20 MODE PROG CHAN OTHER ADJ. IDIOMA / LANGUE CC SET UP ENGLISH Roller Guide Menu Navigation 1 A C T I O N CH CH VOL VOL 2 A C T I O N CH CH VOL VOL 3 A C T I O N CH CH VOL VOL 4 A C T I O N CH CH VOL VOL 5 A C T I O N CH CH VOL VOL Press to display the roller guide menu.
21 OTHER ADJ1 OTHER ADJ2 VIDEO ADJ. NORMAL ON ON OFF COLOR TEMP NATURAL COLOR VIDEO NR 3D Y / C FILTER Roller Guide Menu Navigation SET UP LOCK TIMER LOCK SET BLOCK PROGRAMS : STATUS CHANGE CODE HOW LONG ? MODE CHANNEL U.
22 SET UP Operation SET UP 1 A C T I O N CH CH VOL VOL Press to display the roller guide menu. Press to rotate to SET UP . 2 Press to display SET UP . EXIT SET UP MODE PROG CHAN OTHER ADJ.
23 1 A C T I O N CH CH VOL VOL In SET UP menu press to select PROG CHAN. Press to enter submenu field. ANT1 ANT2 ANTENNA PROG CHAN OTHER ADJ. IDIOMA / LANGUE CC SET UP ANT1 AUTO PROGRAM MANUAL PROGRAM MODE CABLE SET UP Operation ANTENNA Selection T o select either ANT1 or ANT2.
24 MANUAL PROGRAM SET UP Operation T o manually add or delete channels. 1 A C T I O N CH CH VOL VOL In SET UP menu press to select PROG CHAN. Press to enter submenu field. A C T I O N CH CH VOL VOL 2 Press to display next menu. Press to select MANUAL PROGRAM.
25 SET UP Operation AUT O POWER Select SET to power up the TV at the same time as the cable box or other components or select OFF . CHAN BANNER AUTO POWER ON GEOMAGNETIC CORR PROG CHAN OTHER ADJ. IDIOMA / LANGUE CC SET UP OFF OFF 1 A C T I O N CH CH VOL VOL In SET UP menu press to select OTHER ADJ.
26 Closed Captions This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information.
27 cc MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. A C T I O N CH CH VOL VOL In the submenu field press to select cc MODE. Press to select from the following: OFF C1 C2 T1 C4 T3 T4 C3 T2 ON MUTE MODE PROG CHAN OTHER ADJ.
28 Geomagnetic correction (Adjusting skewing of images) GEOMAGNETIC CORR (CORRECTION) adjusts to erase the discoloration of the picture due to earth ’ s magnetic field in the area. This correction is made when moving the TV set or when image is slightly skewed.
29 PICTURE Adjustment 1 A C T I O N CH CH VOL VOL Press to display the roller guide menu. Press to rotate to PICTURE. 2 Press to display PICTURE menu. Press to select the main menu. PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ1 OTHER ADJ2 VIDEO ADJ.
30 COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL Item Function COLOR TINT BRIGHTNESS PICTURE Adjusts desired color intensity . Adjusts natural flesh tones. Adjusts dark areas of picture. SHARPNESS NORMAL Adjusts white areas of picture. Adjusts clarity of outline detail.
31 NORMAL W ARM COOL ON OFF ON OFF ON OFF PICTURE Adjustment COLOR TEMP (T emperature) / NA TURAL COLOR / VIDEO / NR / 3D Y/C FIL TER A C T I O N CH CH VOL VOL In OTHER ADJ1 submenu field press to select each submenu (COLOR TEMP / NA TURAL COLOR / VIDEO NR / 3D Y/C FIL TER).
32 PICTURE Adjustment VM (V elocity Modulation) A C T I O N CH CH VOL VOL In OTHER ADJ2 submenu field press to select VM. Press to select ON or OFF . ON OFF VM FREEZE OTHER ADJ1 OTHER ADJ2 VIDEO ADJ. ON COLOR MATRIX SD SPLIT A C T I O N CH CH VOL VOL In PICTURE menu press to select OTHER ADJ2.
33 PICTURE Adjustment VM FREEZE OTHER ADJ1 OTHER ADJ2 VIDEO ADJ. SPLIT COLOR MATRIX SD ON FREEZE A C T I O N CH CH VOL VOL In OTHER ADJ2 submenu field press to select FREEZE. Press to select SPLIT or PIP . SPLIT PIP A C T I O N CH CH VOL VOL In PICTURE menu press to select OTHER ADJ2.
34 A C T I O N CH CH VOL VOL EXIT LOCK CHANNEL SCAN 1 Press to display the roller guide menu. Press to rotate to CHANNELS. CHANNEL SCAN Let you select the channel scanning mode either F A V or ALL. CHANNEL SCAN F A V T o enter up to 16 favorite channels.
35 CHANNEL SCAN ENTER CHANNEL FAVORITE CHANNELS CAPTION FAVORITES FAV 15 2 5 8 10 15 18 25 CHANNEL SCAN ENTER CHANNEL TO ADD TO DELETE 2 5 8 10 18 25 CAPTION FAVORITES 15 FAV FAVORITE CHANNELS CHANNEL.
36 PRESET CAPTION MANUAL CAPTION INPUT LABEL CAPTION FAVORITES CRTOON CSPAN DISC DISNEY E ! ENCORE ESPN2 ESPNWS FAMILY FLIX FNC FOXSPT FOOD FX GOLF HBO2 PRESET CAPTION PRESS FOR MORE CHANNELS EXIT LOC.
37 PRESET CAPTION MANUAL CAPTION INPUT LABEL CAPTION FAVORITES INPUT LABEL COMPONENT1 COMPONENT2 VIDEO1 VIDEO2 VIDEO3 VIDEO4 TO MOVE CURSOR TO SELECT LABEL DTV STB 123 456 78 0 9 A C T I O N CH CH VOL.
38 MODE BASS TREBLE BALANCE NORMAL OTHER ADJ. SURROUND SPEAKERS AUDIO ADJ. MONO NO EXIT SET UP TIMER NORMAL PICTURE • STEREO - T wo channel Audio reception. • SAP - Second Audio Programming (typically used for bilingual audio). • MONO - Use when stereo signal is weak.
39 Audio Adjustment 1 Press to display the roller guide menu. Press to rotate to AUDIO. 2 Press to display AUDIO menu. Proceed to each adjustment item of the selected main menu.
40 AI SOUND BBE OTHER ADJ. SURROUND SPEAKERS AUDIO ADJ. ON ON AI SOUND BBE OTHER ADJ. SURROUND SPEAKERS AUDIO ADJ. ON ON MODE OTHER ADJ. SURROUND SPEAKERS AUDIO ADJ. ON AI SOUND / BBE Audio Adjustment AI SOUND Equalize overall volume levels across all channels.
41 Audio Adjustment SPEAKERS In AUDIO menu under SPEAKERS, select the desired SPEAKER mode. A C T I O N CH CH VOL VOL In AUDIO menu press to select SPEAKERS. Press to enter submenu field. 1 2 A C T I O N CH CH VOL VOL Press to select your desired mode.
42 Picture in Picture Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. Basic PIP Operation 1 Press the PIP button on the remote control to display the PIP Frame on screen.
43 PIP MIN REW PIP MAX FF Picture in Picture Operation Minimum MAX FREEZE Search Frames PIP Frames Freeze These features are used to size PIP Frame. Press PIP MIN REW or PIP MAX FF to size the PIP Frame. During PIP operation this feature is used to stop action in PIP frame.
44 Notes: (1) Sound from the left screen is output from the speakers on the TV set (and earphone jacks). (2) When the screen is split, signals of the left screen are output from the rear monitor output terminal. (3) The left and right screen are processed by individual circuits, and therefore, may have slight variation in sound and image quality .
45 CH10 SWAP CH CH 123 456 78 0 9 TV/VIDEO Changing the channels for the Split Screen PIP CH VCR CH Select channels for the Split Screen by pressing PIP CH VCR CH . Swapping left and right screens Press SWAP to switch the SPLIT SCREEN and MAIN PICTURE source.
46 ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT button The aspect mode changes each time the ASPECT button is pressed.
47 Confirming Confirm that registration with cable TV provider and connection of equipment are completed. T urn the CABLE BOX on and select the desired volume level. Press while pointing the remote control towards the CABLE BOX. Note: The remote control code number is set for Panasonic products.
48 A C T I O N CH CH VOL VOL Press twice to return to the roller guide. Press to exit roller guide. This returns the set to normal viewing. EXIT LOCK TIMER NORMAL PICTURE TIMER 1 A C T I O N CH CH VOL VOL Press to display the roller guide menu. Press to rotate to TIMER.
49 TIMER SLEEP 1 A C T I O N CH CH VOL VOL In TIMER menu press to select SLEEP . Press to enter submenu field. HOW LONG ? SLEEP TIMER1 TIMER2 CLOCK SET 30 TIMER 2 A C T I O N CH CH VOL VOL Press to select the desired sleep time. T o turn of f the timer select NO.
50 TIMER T imer1 and T imer2 In TIMER menu, select one or both timers to turn the television on and of f at selected times, on selected channels, and on selected days.TIME must be entered in CLOCK SET to operate the TIMER features. A C T I O N CH CH VOL VOL In TIMER menu press to select TIMER1 or TIMER2.
51 TIMER A C T I O N CH CH VOL VOL Press to select ENTER CHANNEL. Press to select channel. A C T I O N CH CH VOL VOL Press to select SET . Press to select YES.
52 LOCK Feature Select LOCK SET to prevent video games and VCR tapes from being viewed. 1 A C T I O N CH CH VOL VOL Press to display the roller guide menu. Press to rotate to LOCK. 2 A C T I O N CH CH VOL VOL Press to display LOCK menu. EXIT LOCK TIMER LOCK SET BLOCK PROGRAMS : STATUS CHANGE CODE HOW LONG ? MODE CHANNEL U.
53 EXIT LOCK TIMER A C T I O N CH CH VOL VOL Press twice to return to the roller guide. T o end Adjustment: Press to exit roller guide. This returns the set to normal viewing. NORMAL PICTURE OFF GAME A C T I O N CH CH VOL VOL A C T I O N CH CH VOL VOL A C T I O N CH CH VOL VOL In LOCK MODE press to select OFF .
54 A C T I O N CH CH VOL VOL CHANNEL A C T I O N CH CH VOL VOL In LOCK MODE press to select CHANNEL. 2 1 Press to select channel position. Press to select channels.
55 In the United States and Canada, the V -CHIP consists of two rating systems, which are MP AA (MOTION PICTURE) and TV P ARENT AL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent from broadcasting stations.
56 U.S. TV PROGRAMS This TV model features the “ V -Chip technology ” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. PIP will also be blocked automatically . A C T I O N CH CH VOL VOL In U.S. TV PROGRAMS press to highlight ST A TUS.
57 The V -Chip system that is used in this set is capable of blocking “ NR ” programs (non rated, not applicable and none) per FCC Rules Section15.
58 U.S. MOVIES This TV model features the “ V -Chip technology ” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion.
59 Canadian English The V -CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada. PIP will also be blocked automatically . A C T I O N CH CH VOL VOL In CANADIAN ENGLISH press to highlight ST A TUS.
60 Canadian French The V -CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. PIP will also be blocked automatically . A C T I O N CH CH VOL VOL In CANADIAN FRENCH press to highlight ST A TUS.
61 V -CHIP Menu OPERA TION PROGRAM RATING EXCEEDED ACCESS CODE PROGRAM RATING EXCEEDED ACCESS CODE PIP RATING EXCEEDED EXIT LOCK A C T I O N CH CH VOL VOL Press twice to return to the roller guide. T o end Adjustment: Press to exit roller guide. This returns the set to the normal viewing.
62 Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The Universal Remote Control can be programmed to operate many manufacturers ’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV , DTV CABLE or DBS.
63 Programming Without A Code (When the code is not known) This procedure searches all codes and is called the “ sequence method. ” 1 Confirm that the external component is plugged in and on.
64 Operating peripheral equipment using the remote control The remote control is capable of operating many brands of peripheral equipment. Refer to pages 62 and 63 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate.
65 Brand Code Panasonic Replay 100 Philips T ivo 101 Sony T ivo 102 VCR Codes for Personal V ideo Recorders Brand Code Denon 100 Ferguson 101 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips.
66 Brand Code Admiral 120 Aiwa 125, 126 Denon 134, 135, 136 Fisher 104 Garrard 1 13 Harman Kardon 1 15, 123 Jensen 129 JVC 132, 133 Kenwood 100, 108 Magnavox 127 Marantz 124 Mclntosh 1 16 Nakamichi 10.
67 Operating peripheral equipment using the remote control Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode TV , DTV , CABLE, DBS, VCR, DVD .
68 Operating peripheral equipment using the remote control DVD MODE AUX MODE KEY NAME VCR MODE RCVR MODE (DVD) (CD) (VCR2) (T APE) POWER POWER POWER POWER POWER POWER ------ TV MUTE TV MUTE RCVR MUTE .
69.
70 Cleaning The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. DO NOT bring into contact with insecticide or other volatile substances. DO NOT allow the unit to come into contact for extended periods with rubber or vinyl products.
71 Specifications Power Source AC 120 V , 60 Hz Power Consumption Average use : 170 W (Maximum Current 3.6 A) Stand-by condition : 0.2 W CRT 30-inch, 16 : 9 aspect ratio Screen Size 25.95 ” (659.1 mm) (W) × 14.59 ” (370.7 mm) (H) × 29.77 ” (756.
Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.
An important point after buying a device Panasonic CT 34WX52 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic CT 34WX52 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic CT 34WX52 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic CT 34WX52 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic CT 34WX52 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic CT 34WX52, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic CT 34WX52.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic CT 34WX52. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic CT 34WX52 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
