Instruction/ maintenance manual of the product CQ-4330U Panasonic
Go to page of 30
Operating Instructions LOUD VOL SEL/SAT PUSH B ASS/TREB BA L/FADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR Heavy Duty Casse.
CQ-4330U 2 Safety Information W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE.
CQ-4330U 3 Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work.
CQ-4330U 4 Contents Safety Information (Part 15 of the FCC Rules) . . . . . . . . . . . . . . . . . . page 2 Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Use this product safely . .
CQ-4330U 5 LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR MUTE PWR V olume level (0 to 40) (default: 18) Power Tu rn the key in the ignition until the accessory indicator lights.
CQ-4330U 6 LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR SCAN Power and Sound Controls (Continued) Audio Modes (Bass/T reble/Balance/Fader) Push [SEL] to select the audio mode.
CQ-4330U 7 LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR TUNE SEEK CLK Clock Setting The 12-hour system is used for the clock. Initial T ime “SET” is displayed when the clock is not adjusted.
CQ-4330U 8 Alarm T ime Setting LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR ALM TUNE SEEK The 12-hour system is used for the clock.
Radio mode Press [MODE] to switch the operation mode as follows: CQ-4330U 9 Radio LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR B AND MODE SCAN TUNE SEEK Band Press [BAND] to change the band.
LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR B AND 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL .
CQ-4330U 11 LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL T uning in a W eather Band Station • Press [BAND] to select WB (Weather Band).
CQ-4330U 12 Cassette T ape Player LOUD OL SEL/SA T USH ASS/TREB L/FADER MUTE SCAN ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U DISP MODE Exposed T ape side Loading a Cassette Insert the cassette with the exposed tape side facing to the right.
LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR TUNE SEEK 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL CQ-4330U 13 Metal T ape Mode Press [1] (MTL) when playing metal or chromium dioxide (CrO2) tapes.
LOUD VOL SEL/SA T PUSH B ASS/TREB B AL/F ADER MUTE SCAN TUNE SEEK ILL 6 5 SKP 4 REP 3 TPS 2 NR 1 MTL DISC CD SCAN RPT RDM CQ-4330U CLK ALM APM DISP B AND MODE PWR MODE 2 NR 1 MTL TUNE SEEK CQ-4330U 14 CD Changer Control CD Changer mode While a disc magazine is inserted in the CD changer , press [MODE] to select CD changer mode.
CQ-4330U 15 Error Display Messages Disc is dirty , or is upside down. ➡ Select the next available compact disc. Check the disc. Disc has scratches. ➡ Select the next available compact disc. Check the disc. No operation by some cause. ➡ Eject the magazine.
CQ-4330U 16 XM Control Preparation: Connect the XM receiver (XM DIRECT MODEL:XM-RVR-D-OO1) to the Unit CQ-4330U. XM satellite radio is available on a chargable basis.
B AND Notes: CA T OFF: Ever y channel can be selected from every category. CA T ON: Only channels in the current categor y can be selected. Default: CA T OFF Manual Preset Memor y Up to 6 channels each can be saved in the XM1, XM2 and XM3 preset station memories.
CQ-4330U 18 Display Change Press and hold [MODE] (DISP) for more than 2 seconds. XM ID Confirmation • Push and hold the knob [SEL] for more than 2 seconds and then push again during 2 seconds. MODE (Press and hold) Channel name (Reading artist name) (Reading song title) Note: Display when there is no name/title or can not decode.
CQ-4330U 19 Preliminar y Steps Check and take steps as described in the tables below . If Y ou Suspect Something Wrong Immediately switch the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs.
CQ-4330U 20 Much noise in FM stereo and monaural broad- casts. Tr ouble The antenna ground lead is not connected properly . a Connect the antenna ground lead properly . The radio antenna is not extended enough. a Extend fully the radio antenna. Preset station is reset.
CQ-4330U 21 Speaker Connections Caution: Please follow the instructions given below . Failure to do so will cause damage to the unit and speakers. L R - - - - - - - - - - + + + + + + + + + + - + - + -.
CQ-4330U 22 Installation Guide ❐ This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product.
CQ-4330U 23 ❐ Preparation ❐ Installation Hardware Wa rning: If your vehicle is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and disconnection of the battery to install this product.
CQ-4330U 24 Installation (Continued) Cautions: • We strongly recommend that you wear gloves for installation work to protect yourself from injuries. • When bending the mounting tab of the mounting collar with a screwdriver , be careful not to injure your hands and fingers.
CQ-4330U 25 To Remove the Unit from the vehicle's dashboard Insert each Removal T ool i and pull. Note: Do not lose Removal T ools. They will be needed to remove the unit from the vehicle's dashboard.
CQ-4330U 26 Electrical Connections Cautions: • This wiring information is for experienced technical individual, for safety reason, please your dealer wire this connection. • This product is designed to operate with a 12 V DC, negative ground battery system.
CQ-4330U 27 Electrical Connections (Continued) Extension Cable for connecting the unit and the XM receiver . ŏ The Extension cable does not come along with the unit, if need, please consult your dealer .
CQ-4330U 28 Electrical Connections CQ-4330U CD changer connector (10P connector) CD Changer (CD-DP880, option) Extension Cable for connecting the unit and CD changer . ŏ The Extension cable does not come along with the unit, if need, please consult your dealer .
CQ-4330U 29 Specifications ❐ General Power Supply: 12 V DC (11 V-16 V) test V oltage 14.4 V , Negative ground Current consumption: Less than 2.5 A (tape mode, 0.
YFM284C419ZA T AMACO0304-0 Printed in T aiwan Panasonic Consumer Electronics Company , Division of Matsushita Electric Corporation of America One Panasonic Way , Secaucus, New Jersey 07094.
An important point after buying a device Panasonic CQ-4330U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic CQ-4330U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic CQ-4330U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic CQ-4330U you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic CQ-4330U will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic CQ-4330U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic CQ-4330U.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic CQ-4330U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic CQ-4330U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
