Instruction/ maintenance manual of the product CF-19CDBAXVM Panasonic
Go to page of 84
ORDER NO. CPD0612203A1 Notebook Computer CF-19CDBAXVM © 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law. This is the Service Manual for the following areas. M …for U.S.A.
1.
2.
3.
CONTENTS 1. Spe c ifications 1-1 2. Names and Fun c tions of Parts 2-1 3. Block Diagram 3-1 4. Diagno s is P r ocedure 4-1 5. Power-On Self Te s t (Boot Che c k) 5-1 6. List of Error Codes <On l y when the port replicator is connected> 6-1 7. Self Diagnosis Test 7-1 8.
Main Specifications Model No. CF-19CHBAXBM CF-19CDBAXVM CPU Intel ® Core™ Duo Processor U2400 (1.06 GHz , 2 MB *1 L2 cache, 533 MHz FSB) Chipset Intel ® 945GM Memory *1*2 512 MB (4096 MB Max.) Video Memory *1*3 UMA (128 MB Max.) Hard Disk Drive *4 80 GB Display Method 10.
Operating System Microsoft ® Windows ® XP Professional Service Pack 2 with Advanced Security T echnologies (NTFS File System) Microsoft ® Windows ® XP T ablet PC Edition 2005 (NTFS File System) Ut.
A: Wireless LAN Antenna <Only for model with wireless LAN> Reference Manual “Wireless LAN” B: Bluetooth Antenna <Only for model with Bluetooth> Reference Manual “Bluetooth” C: Styl.
Left side Rear side Bottom A: DC-IN Jack B: USB Port Reference Manual “USB Devices” C: IEEE 1394 Interface Connector Reference Manual “IEEE 1394 Devices” D: Modem Port Reference Manual “Mode.
3 Block Diagram PR-P S/2 ( KB& Mous e ) Y onah UL V Dual core int l e Supe r I/O SIO1 0N 26 8 SMSC EC/KBC (M306K A ) Li-Ion Ba tt ery Pa ck Intel® Core™ Duo mobile proce s sor U2400 (Ultra Low V o ltage 1.06GHz) L1 ca che : Int e r na l 6 4 K b y t e s ea ch core L 2 c a c h e: In tern al 2M by tes 1.
4 Diagnosis Procedure 4.1. Basic Procedures 4-1.
4.2. T roubleshooting Please t ake note of t he follow ing two p oints w ith regard to t roublesho oting: 1. Know-how of diagnosis upon occurre nce of heavy troubl es, e.g. Set c ann ot be turned ON , Set fails to start , No display on screen , etc. 2.
5 Power-On Self T est (Boot Check) Outline of POST The set has a boot check function called POST (Power-On Self T est) in it. The condition of the main body is diagnosed by checki ng beep sound or error code. S tart .............T est begins automatically when power switch is set to ON.
The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured.
T roubleshooting 02D0 System cache error - Cache disabled Contact Panasonic T echnical Support. 02F0: CPU ID: CPU socket number for Multi-Processor error . 02F4: EISA CMOS not writable ServerBIOS2 test error: Cannot write to EISA CMOS. 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.
7 Self Diagnosis T est As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the enhancing test by the module of the main body building in are possible.
-Only the de vice which can be inspected on the entire screen is displa yed. -The item does not appear when the de vice of wireless LAN etc. is not ph ysically connected. -The mov ement of the item must use an arrow ke y or a flat pad. -As f or the de vice under the diagnosis, b lue and yello w are alternately display ed at the left of the icon.
1. 2. 3. 4. 5. T ur ned on the computer . "F2" is pushed on the screen while "Press<F2>to enter Setup" is displa yed of "P anasonic". Push "F10", and on the screen of "Is the change in the setting preser v ed and do end?"and then "Y es" is selected, and "Enter" is pushed.
7.1. T est Item and Division of trouble CPU / SYSTEM T est item Stanard Enhancing Content of standard test Content of enhancing test Place with possibili- ty of breakdown CPU is shifted to protected m.
Test Item Standard Enhanced Content of Standard Test Content of Extend Test The place with possibility of breakdown Touch Screen It is confirmed not to find abnormality in the USB connection of Touch Screen. This test cannot find abnormality of Touch Screen.
8 Wiring Connection Diagram CN1 CN2 INVERTER PCB BACK LIGHT CN901 CN900 CN17 CN5 CN16 CN604 JK601 JK600 CN1 CN600 CN27 CN901 CN18 CN8 KEYBOARD I/F PCB I/O PCB ANT PCB SD PCB MODEM PCB TS PS2 PCB EXTER.
9-1 9 Disassemb ly/Reassem bly Note: Power off the c omputer . Do not shut down to the Suspend or hibernation m ode. Do not add peripherals while the compute r is in the Suspend or hib ernation mode ; abnormal ope ration may res ult. 9.1. Disassembly I nstructions 9.
9-2 4. Lif t the far s ide of the Keyboard a nd slide it to b ackward, and then turn the Key board ove r frontward. 5. Remov e the 3 Screw s <N1>. 6. Remov e the KBD C onnector Co ver . 7. Disco nnect the Cable f rom Conn ector (CN1 8). 8. Remov e the Keyb oard.
9-3 9.1.6. Removing the DU Lid Unit 1. Remove the 7 Scre ws <K14-9 >. 2. Remove the DU Li d Angle an d DU L id. Scr ews <K14 -9> : DXQ T2+D2 5FNL 9.1.7. Removing the HSD P A PCB and Bluetooth PCB 1. Remove the Cab le Holder C ushion. 2. Discon nect the 2 Antenna Cab les (brown, black).
9-4 9.1.9. Removing t he Main PCB, Wirele ss Module, SD PCB, Antenna PCB and Modem PCB Note: This proc edure is not neces sary if t he compu ter is not equipped with Wi reless Modu le or Mod em PCB. 1. Disconnect the 2 LCD Cables. (CN8,CN17) 2. Remov e the gr ay , black and white Antenna Cables.
9-5 14. Remove the 2 Scre ws <N19>, and remov e the DI MM Holder . 15. Remove the T ape. 16. Discon nect the 3 Cables from the 3 Connecto rs. (CN9,CN14,CN23) 17.
9-6 9.1.13. Removing Pad PCB and SW P CB 1. Disco nnect the 2 Cable s from the 2 Conne ctors (CN805,CN807). 2. Remov e the 4 Screw s <N1>. 3. Remove t he Pad PCB. 4. Remov e the Operati on Sheet a nd the SW PC B. Screws <N1> : DFHE5025XA 9.
9-7 9.1.15. Remov ing the LCD Re ar Case 1. Remove th e 8 Screws < N7> on th e front sid e of Displ ay unit. 2. Remove the 8 Scre ws <N7> o n the b ack side of Displa y unit. 3. Remove 2 Antenna Covers and T ablet Latc h Cover . 4. Remove the 10 Sc rews <N15>.
9-8 9.1.19. Removing the Ea ch Cover 1. Remov e the 14 Screw s <N6>. 2. Remov e the Modem /LAN LID R ubber , LAN LID R ubber , USB LID Rubb er , DC IN LID Ru bber , Serial LI D Rubber , RGB LID Rubb er , Audio LID R ubber and USB Back Rubb er . 3.
9-9 9.2. Reassembly I nstructions 9.2.1. Attentio n when CF-19 serie s is rep aired • Please e xecute w riting BIO S ID when you exc hange the Main B oard. • Part s (Sheet an d rubber) et c. rela ted variou s the Cond uctive C loth and Heat S preader cannot be recycled.
9-10 n Assembly of LCD Back Dampe r (Application M odel : Digitizer M odel) n Assembly of Inverter PCB PCB PCB Screw the Board together Attch to the side surface of the Frame. Match to the end of the Frame within 0 to 0.5 mm at the far side. 0 0.5mm 0 0.
9-1 1 n Assembly of Inverter PCB (Applica ble Model : T ouch Scree n Model) Inverter Ass’y Inverter Ass’y 0 4mm 0 0.5mm A 0 3mm Connector PWB FPC 12 Confirm the direction of the Inverter board when attaching. 30 35mm Inverter Ass’y LCD Back Dumper LCD Ass’y 0 1mm Inverter Mil Sheet The gap side is front.
9-12 n Assembly of Inverter PCB (Applic ation Model : Digitizer Mo del) n Assembly of T ouch Screen ( Applicable Model : T ouc h Screen Model) Inverter Ass’y LCD Back Dumper Conductive Tape Avoid running over . Attach the surface to the LCD Front. Apply the load 20 to 30N (2.
9-13 n Assembly of Glass (Appli cable Mode l : Digitizer Model ) 9.2.3. Assembling the WW AN Main Antenna PCB, LAN-Main BT Ant e nna PCB, LAN AUX Antenna PCB, WW AN AUX Antenna PCB and Pe n holder 1. Fix th e Pen Holder using the 2 Screws. <K 10-1-13> 2.
9-14 n Line Proces sing of Antenna Cable 9.2.4. Setting up the LCD Hinge 1. Wind the Cable c oming ou t of the LC D Unit c ounterclo ck- wise to the LCD Hinge. 2. Set the Lock Pla te and the Hinge T op Cover , and rotate the LCD Hinge to turn the Display Unit to front 3.
9-15 n Assembly of LCD Hing e n Line Process ing of Antenna Ca ble and LCD Cab le If you arrange the Cable in the area, you do not need to use the fixing jig.
9-16 9.2.5. Asse mbling the Antenna Cover , the T ablet Latch Cover and the LCD Re ar Case 1. Fix t he LCD R ear Case us ing the 1 0 Screws <N 15> and the 2 Scre ws. <N16> 2. Atta ch th e A n ten na Cov ers an d the T ablet Latch Cov er t o the Disp lay Unit.
9-17 n Assembly of LCD Rear Case (Applicable Mode l : T ouch Sc reen Model) n Assembly of LCD Rear Case (Appli cable Mode l : Digitizer Model ) 0 1mm 0 1mm 0 1mm 0 0.5mm 0.5mm 0.5mm Attach it between marking lines. 0 to 1 mm from one of the lines. Marking line 0.
9-18 n Assembly of T ablet Latch Cover and Antenn a Cover 10 Places 16 Places Do not forget fixing with screws. Tablet Lacth Cover Antenna Cover Antenna Cushion L Screw Screw Screw Screw Press and hold it against the cabinet, and fix it using the Screw.
9-19 9.2.6. Setting the Display Uni t 1. Fix th e Display U nit using the 2 Scre ws <N9>. 2. Close t he Disp lay Uni t and turn the compu ter over , then fix the Dis play Unit us ing the 4 S crews <N18>. 3. T urn the comp uter over a nd fix the LCD Hinge Cover usi ng the 2 S crews <N 1>.
9-20 n Assembly of Display Unit LCD UNIT A Note Avoid any stress on the Cable. Safety Working Details of "A" Screw Screw Screw Screw Screw Screw Screw Screw Order of fixing Close the LCD hooking the Hinge on the Top Case, and then fold back.
9-21 9.2.7. Setting the Pad PCB and SW PCB 1. Attac h both th e SW PCB and th e Operatio n Sheet to the Cabinet . 2. Connec t the 3 Ca bles to t he 3 Con nectors. (CN800,C N805,CN807 ) 3. Fix th e Pad PCB usin g the 4 Screw s. <N1> Note: T ighten the Screws in the numbered order (No1 t o No4 ).
9-22 n Assembly of the Pad PCB and SW PCB n Putting o f the TP Bottom T ap e 9.2.8. Setting the lef t LED PCB and right LED PCB 1. Connec t the Ca ble to the Connector . (C N806) 2. Fix t he left LED PCB. 3. Connec t the Ca ble to the Connector . (C N801) 4.
9-23 n Assembly of the lef t LED PCB and right LED PCB 9.2.9. Setting the Power SW PCB 1. Connec t the Cab le to the Co nnector . (CN9 ) 2. Fix the Powe r SW PCB us ing the Sc rew .
9-24 9.2.10. Setting the I/ O PCB As s'y 1. Fix t he I/O PCB us ing the 2 Screws. <N 9> 2. Fix t he I/O PCB us ing the 4 Screws. <N 2> Screws<N 2> : DFHE50 58ZB Screws<N9> : DRSB2+5 FKL 9.2.1 1. Setting the Mai n PCB, Wireles s M odule, SD PCB, DU PCB, Antenna PCB and Modem PCB 1.
9-25 4. Fix th e Modem PCB using the 2 Screws <N 19>. 5. Fix th e Wireless M odule us ing the 2 Screws <N1 9>. 6. Fix th e DIMM Hold er using t he 2 Screws <N19>. 7. Attac h the Cable to the C onnector (CN3) an d attach the Coin Battery .
9-26 14. Fix t he DU PCB and the Pla te using the 2 screw s <N3>. 15. Fix the DU PCB As s'y and Antenna PCB u sing the 3 screws <N9 > and the 2 screws <N3 > . 16. Connec t the wh ite, blac k and gray Cables. 17. T urn the compu ter over , ope n the Display Un it, and th en connec t the 2 LCD Cables.
9-27 n Assembly of Main PCB Connect to the MDC connector. Modem Cable Modem T ape Fold the Tape in half. 0 1mm 0 1mm Basteraid Process in the order of 1 2 3 4. MDC Basteraid 0 1mm 0 1mm Cover the Screw head Fold back Coin Battery Preparation Wrap Sub material (19mm width x 3 cm) MODEM PCB Set Fix the Screw (#5) from the back side.
9-28 Back side Match to the edge of the Board. 0 to 1mm Match to the Connector. 0 to 1 mm Fold back and attach it Insulation Tape 0 0.5mm DIMM Sheet DIMM Sheet Remove the DIMM and attach the Sheet. Set the DIMM after attaching the Sheet. Match to the silk 0 0.
9-29 n Assembly of Main Uni t DU PCB ASSY Main PCB Ass’y Insert it before setting the Main Board. Audio FPC Ass’y Apply the lubricant (sub material) on the HDD Connector for about 1 second. (Note for spraying around when applying.) Audio FPC Ass’y Avoid running the Cable over the Connector.
9-30 9.2.12. Setting the Audio PCB 1. Connec t the Ca ble to the Connector . (C N901) 2. Fix t he Audio PCB u sing the 3 Screws. <N 9> Note: T ighten th e Screws in the numbe red order (No1 to No3). Screws <N9> : DRSB2+ 5FKL Screw Screw SD Blind Sheet Battery FPC Ass’y Ensure that both top and bottom are hooked.
9-31 9.2.13. Setting the HSDP A PCB and Bluetooth PCB 1. Fix th e Plate and Bluetooth PCB using the 2 Screws <N19>. 2. Connec t the Cab le to the Co nnector . (CN1 ) 3. Connec t the Cab le to the Co nnecto r . (CN604) 4. Fix th e Plate and the Board u sing the 4 Screws <N 19>.
9-32 n Line Proces sing of Antenna Cable of Main Unit Step 1 Step 2 Step 3 Step 4 Cable Cable Process 1/3 Place brown/blue/gray cables at left and white/black cables downward. After connecting the white antenna cable, connect it into the Holder as illustrated.
9-33 9.2.14. Assembli ng the DU Lid Unit 1. Fix th e DU Lid Angle and the DU Li d using t he 7 Screws . <K14-9> Scr ews <K14 -9> : DXQ T2+D2 5FNL Cable Holder Cushion Cable Step 14 Step 12 Step 13 Cable Process 3/3 Connect the brown antenna cable.
9-34 9.2.15. Setting the Rea r Cabinet 1. Fix t he Rear Ca binet on th e Comp uter using the 13 Screws. <N10> 2. Cl ose the L id Cover s. Note: T ighten th e Screws in the numbe red order (No1 to No13 ). Screws <N10> : DRHM0061ZA n Cautions for Se tting the Rear Cab inet 9.
9-35 9.2.17. Setting the T ouch Pad and Keyboard 1. Connec t the C abl e to the C on nec tor ( CN8 00), and att ach the T ouch Pad to th e comput er . 2. Set the Click Butto n Plate. 3. Attac h the new T P T ape over th e T ouch Pad. 4. At tach the Pal m Rest Ass'y o n the compu ter .
9-36 ■ Putting of the Sheet ■ Cautions for Setting the Keybo ard LCD Cushion Sheet LCD Cushion Sheet KB CNT Hole Cushion Gasket E KBD Waterproof Sheet C Palmrest Waterproof Sheet L TP T ape Palmrest Waterproof Sheet R Click Button Plate 0 0.5mm 0 0.
9-37 n Putting of the Pa lm Rest ASSY n Putting of the KBD T ap e Windows Logo Label Intel Label Energy Star Label Palmrest Assy 6 8mm 3 5mm 5 7mm 6 8mm 4 6mm Remove the Release Paper, and then attach the Palmrest Assy. Remove the two-sided tape on the back side and attach it.
9-38 9.2.18. Setting the Bat tery Pack and the HDD P ack 1. Set the HDD in the HDD Case and fix it using the 2 Screws. <N13> 2. Open the HDD Cover and set the HDD Pack.
9-39 n Assembl y of the HDD ASSY Heater Ass’y Heater Assy Note for the Heater top end location Two-sided Tape Come the bottom over by 0 to 0.5 mm. Attach on the inside of 1 Details for attachment of.
9-40 9.2.19. Assembling th e Each Co ver 1. Fix the Battery LID Ass'y , th e HDD LID Ass'y , and the PCMCIA LID Ass'y usin g the 6 Sc rews.
CF-19C D BAX V M 10 Exploded View E24 K1 10 K82 N1 K39 K1 15 K1 14 K 111 K1 16 E32 K34 N1 N1 K83 K1 10 N9 N9 N9 K31 K30 K9 K60 K80 K80-8 K80-4 N13 K80-5 K80-6 K80-1 K80-1 1 K80-10 K80-9 E23 K80-8 K80-.
CF-19C D BAX V M K12-14-1 1 B A K12-14-9 A K12-14-9 A K12-14-10 K12-16 K12-16 K12-16 K12-16 K12-3-4 K12-14-4 N1 K90 K12-14-1 1 K12-14-1 K12-14-5 K12-14-3 K12-14-1 K12-14-7 K1 12 K12-6 K12-14 K12-3 K12.
CF-19C D BAX V M N9 N2 K105 K125 K99 K123 K141 K38 E3 N9 K143 N4 K22 E31 K43 K42 K35 E14 K48 K98 K44 K88 K91 K87 N19 K86 K135 E35 K137 N9 N9 N1 N19 N19 K89 K89 E27 E29 E30 N19 E26 K43 K132 N1 K36 .
CF-19C D BAX V M K14-8 K14-7 K14-7 K14-8 N10 K16 K16 K16 K14 K16 N10 N10 N10 N10 K25 K26 K28 K85 K32 K32 N6 N10 N6 N6 K27 K18 K21 K23 N10 K55 K14-1-2 K14-1 K14-1-1 K14-8 K14-8 N6 N6 K1 N10 K14-5 K14-3 K14-9 K14-9 K14-9 K14-4 K14-6 K14-2 N6 K20 K17 K54 K84 K24 K19 K28 K54 A A A A A A A A A A A A A A A A A Screw tightening torque 0.
C F -1 9 C D B A X VM E36 K61 K62 K61 K10-1-13 K10-1-1 1 K10-1-9 K10-3 K10-2 N1 K10-1-7 K10- 1-3 K10-1-3 K10-1-5 K10 -1-5 K10-1-6 K10-1-7 K10-1-4 K10-1-4 K10-1-6 N1 K29 K6 K79 K79 K58 K58 K67 N17 N17 .
C F - 1 9C D B A XV M E21 E36-7 E36-7 E36-4 E36-9 E36-9 E36-22 E36-22 E36 E36-1-1 E36-1-2 E36-1 E36-23 E36-1 1 E36-10 E36-1 1 E36-12 E36-6 K73 K72 E22 K65 K78 K77 K76 K74 E36-20 K54 E36-7 E36-7 K71 A A A A Screw tightening torque 0.18 _ 0.02N m (1.8 _ 0.
C F - 1 9C D B A X V M K68 K69 N7 N7 N7 K1 1-9 K1 1-10 K1 1-1-2 K1 1-1-2 K1 1-1-4 K1 1-1-4 K1 1-1-5 K1 1-1-5 K1 1-1-6 K1 1-1-3 K1 1-1-3 K1 1-1-1 K1 1-1-1 K1 1-1 K1 1 N7 N7 N7 K68 N7 N7 N7 N15 N15 N15 .
Replacement Parts List CF-19CDBAXVM (2006/11/20) PART NO. DESCRIPTION Q'TY E1 DL3U11530AAA PCB, MAIN RTL 1 E2 DL3U21530AAA PCB, AUDIO RTL 1 E3 DL3U31530AAA PCB, IO RTL 1 E4 DL3U11550BAA PCB, PAD .
E36-23 DFMX0383TA TAPE 1 A1 S NCR-B/603A LITHIUM ION BATTERY PACK 1 A2 S CF-AA1633AM1 AC ADAPTOR 1 A3 S K2CG3DR00003 AC CORD 1 A4 S DFQX5624ZA MANUAL(CF-19MK1) 1 A5 DFJS954ZA MODEM CABLE 1 A6 DFHS9017.
K11-3 DFHR3460YA LCD REAR CUSHION A 2 K11-5 DFHR3461YA LCD REAR CUSHION B 2 K11-6 DFHR3563YA LCD REAR CUSHION C 3 K11-7 DFHR3564YA LCD REAR CUSHION D 1 K11-8 DFHR3565YA LCD REAR CUSHION E 2 K11-9 DFGB.
K13-4 DFHM0295ZA TABLET LATCH SHAFT 1 K13-5 S DFKE0892ZA-0 TABLET LATCH KNOB 1 K13-6 S DFKE0893ZA-0 TABLET LATCH LEVER 1 K13-7 DFNW1604ZA CUT WASHER 1 K13-8 DFUN0069XA LATCH KNOB SPRING 1 K14 S DFKM90.
K55 DFMY0419ZA DIMM THERMAL RUBBER 1 K56 DFMY0444YA THERMAL RUBBER 1 K57 DFHE0915ZA EMI SHEET 10X20 1 K58 DFHM0325ZA CABLE HOLD PLATE 2 K59 DFHR3432ZA ANT CABLE CUSHION 4 K60 DFHR3516ZA PROTECT SHEET(.
K106 DFHR3049ZA LCD DAMPER E 1 K107 DFHR3438ZA CLICK BUTTON SHEET 1 K108 DFHR3483SA OPERATION SHEET 1 K109 DFHR3583YA KB WP SHEET 1 K110 DFHR3642YA LCD CUSHION SHEET 2 K111 DFHR3643ZA TP BOTTOM TAPE 1.
Replacement Parts List CF-19CDBAXVM (2006/11/20) PART NO. DESCRIPTION Q'T Y MAIN PCB C 1, 2, 3, 6, 7, 8, 10, 11, 12, 14, 15, 16, 18, 19, 20, 22, 23, 24, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37.
C 200, 235, 289, 293, 297, 302, 340, 342, 343, 616, 623, 639, 641, 643, 659, 677, 679, 680, 684, 802, F1G1H102A496 CAPACITOR, 50V, 1000pF 22 C 241, 242 F1G1H150A542 CAPACITOR, 50V, 15pF 2 C 243, 804 F1J1E334A081 CAPACITOR, 25V, 0.
CN 22 K2HZ104B0014 CONNECTOR 1 CN 23 K1MY40A00001 CONNECTOR 1 CN 24 K1KY12A00005 CONNECTOR 1 CN 25 K1KYA0A00019 CONNECTOR 1 CN 27 K1MN40B00048 CONNECTOR 1 D 1, 2, 3, 8 MA2J72900L DIODE 4 D 4 B0JDBE000.
IC 600 C0ABZA000047 IC, AMP 1 IC 601 C0ABBA000093 IC, OP AMP 1 IC 602 C0DBAYY00194 IC, DC/DC 1 IC 603 C0JBAD000236 IC, LOGIC 1 IC 604 C0JBAB000622 IC, 1 GATE LOGIC 1 IC 605 C0DBEFH00002 IC, REGULATOR .
R 22 ERJ2RKF75R0X RESISTOR, 1/16W, 75 Ω 1 R 23 ERJ2GEJ240X RESISTOR, 1/16W, 24 Ω 1 R 26, 266, 609, 612, 613, 749 ERJ2GEJ562X RESISTOR, 1/16W, 5.6K Ω 6 R 27, 29 ERJ2RKF2210X RESISTOR, 1/16W, 221 Ω 2 R 33, 34, 78, 132, 167 ERJ2RKF24R9X RESISTOR, 1/16W, 24.
R 267, 268, 269, 270 ERJ2RKF49R9X RESISTOR, 1/16W, 49.9 Ω 4 R 273 EXBV8V750JV RESISTOR ARRAY 1 R 274, 275, 276, 640, 666, 36 ERJ2GEJ223X RESISTOR, 1/16W, 22K Ω 6 R 284, 285 D1H81024A024 RESISTOR ARRAY 2 R 290, 291 ERJ2GEJ222X RESISTOR, 1/16W, 2.2K Ω 2 R 311, 317, 436 ERJ2RKF3901X RESISTOR, 1/16W, 3.
X 1 H0J143500058 OSCILLATOR, 14.318MHz 1 X 2 H0J327200115 OSCILLATOR, 32.768KHz 1 X 3 H0J245500083 XTAL 1 X 4 H0J250500076 XTAL 1 X 5 H2D800400015 OSCILLATOR, 8MHz 1 ZA 1, 2, 5, 6, 7, 10, 11 K1YGZZ000.
C 883 F1L1E106A017 CAPACITOR, 25V, 10µF 1 C 884, 885, 886, 887, 888, 889, 890 F1G1H330A542 CAPACITOR, 50V, 33pF 7 C 891 F1G1C104A042 CAPACITOR, 16V, 0.
CN 851 K1KAA0AA0244 CONNECTOR 1 L 852, 853 J0JJC0000015 INDUCTOR 2 L 850 J0MAB0000200 INDUCTOR 1 LED-RIGHT PCB CN 780 K1MN06AA0058 CONNECTOR 1 LD 781 B3AGB0000040 DIODE 1 LD 782 B3ADB0000065 DIODE 1 LD 783 B3ABB0000210 DIODE 1 SD PCB C 890 F1G1C104A042 CAPACITOR, 16V, 0.
SW 980 K0D112A00096 SW 1 EXTENAL ANTENNA PCB CN 1 K1QZB2AA0002 COAXIAL CONNECTOR 1 CN 2, 3, 4, 5 K1QZA1AE0001 CONNECTOR 4 BLUETOOTH PCB C 1 F1J0J106A016 CAPACITOR, 6.3V, 10µF 1 C 2, 4, 7, 11 F1G1C104A042 CAPACITOR, 16V, 0.1µF 4 C 3, 5 F1G1H102A496 CAPACITOR, 50V, 1000pF 2 C 6, 9 F1G1E103A062 CAPACITOR, 25V, 0.
An important point after buying a device Panasonic CF-19CDBAXVM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic CF-19CDBAXVM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic CF-19CDBAXVM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic CF-19CDBAXVM you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic CF-19CDBAXVM will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic CF-19CDBAXVM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic CF-19CDBAXVM.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic CF-19CDBAXVM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic CF-19CDBAXVM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center