Instruction/ maintenance manual of the product BT-LT80W Panasonic
Go to page of 20
Panasonic Broadcast BT-LT80W Menu Information.
DC14.0V YP B P R 1080/60I 50% P-P 4 3 5 1 2 6 7 [PHASE] 32 12 How to Use the On Screen Menu Six types of information are displayed on the screen: the operating status display , picture adjusting knob status, sharpness display , function display , DC power supply voltage display , battery level display and menu display .
SHARPNESS H 30 F1:MARKER F2:WFM F3:PIXEL TO PIXEL XXXXX DC14.0V 50% MENU EXIT SEL. ENTER ENTER [MAIN MENU] MARKER VIDEO CONFIG SYSTEM CONFIG VF CONFIG FUNCTION GPI INPUT SELECT CONTROL HOURMETER 13 Sharpness display • SHARPNESS H/V is displayed when it is set.
MENU 12 FUNCTION 3 INPUT ENTER MENU EXIT SEL. ENTER ENTER [MAIN MENU] MARKER VIDEO CONFIG SYSTEM CONFIG VF CONFIG FUNCTION GPI INPUT SELECT CONTROL HOURMETER MENU EXIT SEL. ENTER SET [MARKER] MARKER 16:9 4:3 BACK CENTER GPI PRESET1 GPI PRESET2 OFF OFF OFF NORMAL OFF 4:3 4:3 MENU EXIT SEL.
MENU EXIT SEL. ENTER ENTER [SYSTEM CONFIG] CONT ./BACK. BACKLIGHT PEAKING/PHASE ST A TUS DISPLA Y BA TTERY REMAIN SETUP LOAD SETUP SA VE PWR ON SETUP BACKLIGHT -- PEAKING 3SEC OFF OFF FA C T O RY USER1 LAST MENU EXIT SEL. ENTER SET [ SETUP SA VE ] USER1 YES NO MENU EXIT SEL.
MAIN MENU MARKER VIDEO CONFIG SYSTEM CONFIG MARKER 16:9 4:3 BACK CENTER GPI PRESET1 GPI PRESET2 GPI CONTROL GPI1 GPI2 GPI3 GPI4 GPI5 GPI6 GPI7 GPI8 USER 63 D93 D65 D56 VA R 1 VA R 2 VA R 3 [WHITE BALANCE V AR1]* [WHITE BALANCE V AR2]* [WHITE BALANCE V AR3]* CONT .
17 Main Menu (continued) MARKER The underlined values are factory preset setting values. Sub menu Settings Explanation MARKER OFF ∗ 1 ON Used to make MARKER settings effective. 16:9 ∗ 2 ∗ 3 OFF 4:3 13:9 14:9 CNSCO VIST A 95% 93% 90% 88% 80% Used to select/display the type of marker when the aspect ratio setting is 16:9.
18 Main Menu (continued) T ypes of MARKER 16:9 marker (Displayed when using HD, or when using SD with a 16:9 aspect ratio) The marker is only displayed as a vertical bar . In addition, the section becomes the “MARKER BACK” item. 4:3 marker 13:9 marker 14:9 marker VIST A marker , CNSCO marker A horizontal dotted line is displayed as the marker .
19 VIDEO CONFIG The underlined values are factory preset setting values. Sub menu Settings Explanation COLOR TEMP . USER 63 ∗ 1 D93 D65 D56 VA R 1 VA R 2 VA R 3 Used to select the color temperature.
20 Main Menu (continued) About IP Mode By selecting “MODE1”, you can convert IP through Frame Interpolation. This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 1 frame delay or more. Factory preset setting value is “MODE1” recommended for normal use.
21 SYSTEM CONFIG The underlined values are factory preset setting values. Sub menu Settings Explanation CONT . /BACK. BACKLIGHT CONTRAST Used to select the function to be assigned to CONT/B.LIGHT (a knob on the front panel). <BACKLIGHT> Used to adjust BACKLIGHT .
22 VF CONFIG The underlined values are factory preset setting values. Sub menu Settings Explanation VF CONTROL VF-CH ALL-CH Used to select the input line for the VF function of the monitor . (VF function: tally lamp lit, zebra displayed, displayed) <VF-CH> Only enabled when the VF line is selected.
23 FUNCTION The underlined values are factory preset setting values. Sub menu Settings Explanation FUNCTION1 - 3 BLUE ONL Y SD ASPECT ∗ 1 ∗ 2 WFM MARKER ∗ 1 ∗ 3 PIXEL TO PIXEL ∗ 4 PIXEL POS.
24 Main Menu (continued) Restrictions on various FUNCTION settings Under the following conditions, various settings are disabled. Setting Disabling condition SD ASPECT Does not operate while GPI items are being set. Does not operate during PIXEL TO PIXEL operation.
25 Main Menu (continued) About WFM Y ou can display the wave form monitor using the “WFM” function. The display changes each time you press one of the buttons, [FUNCTION1] to [FUNCTION3] ( → page 23), assigned with the [WFM] function (T o use the “WFM” function, you must assign it to one of the [FUNCTION1] to [FUNCTION3] buttons).
26 Main Menu (continued) Display position sequence during an HD signal 1080i input PIXEL POS.+: 1) → 2) → 3) → 4) → 5) → 6) → 7) → 8) → 9) → 1) · · · · · PIXEL POS.
27 Main Menu (continued) Push once the FUNCTION button to which the FOCUS-IN-RED function is assigned. Normal screen FOCUS-IN-RED display Push the same button once more Displays in red the section of the image that is being focused The aspect of 16:9 in the screen example.
28 GPI The “GPI CONTROL” item is used to set enable/disable of all GPI functions, and assigns functions to each of the GPI terminal pins ( → page 31).
29 INPUT SELECT The underlined values are factory preset setting values. Sub menu Settings Explanation YP B P R ON OFF Used to set the YP B P R line to the INPUT SELECT button. ∗ 1 COMPONENT LEVEL SMPTE B75 B00 Used to select the input level for the YP B P R (component) signal.
[MAIN MENU] MARKER 30 CONTROL The underlined values are factory preset setting values. Sub menu Settings Explanation CONTROL LOCAL REMOTE Used to select the operation.
An important point after buying a device Panasonic BT-LT80W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic BT-LT80W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic BT-LT80W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic BT-LT80W you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic BT-LT80W will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic BT-LT80W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic BT-LT80W.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic BT-LT80W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic BT-LT80W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
