Instruction/ maintenance manual of the product BT-LS1400P Panasonic
Go to page of 16
Before attempting to connect, operate or adjust this product, please read these instructions completely. BT -LS1400 P Liquid Crystal Video Monitor POWER INPUT SCAN BLUE MENU/ EXIT ENTER MEN U VOLUME P.
2 indicates safety information. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
3 indicates safety information. CAUTION: THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. ∫ THIS APPARATUS MUST BE GROUNDED To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal house- hold wiring.
4 This product has been specially designed for commercial use. As such, it should be used and operated only by persons with related expertise. ¥ ¥ The liquid crystal parts are fabricated using high-precision technology. The screen has effective pixels that cover more than 99.
5 Power switch This is the main power switch. When the power is ON, the LED (green) above the switch lights. 1 2 INPUT selector button This is used to select the signal input, and each time it is pressed, the input is switched in the following sequence: LINE A > LINE B > CMPNT > SDI > LINE A.
6 Parts and their functions (rear panel) REMOTE connector This 9-pin, D-sub connector is for remote control purposes. < = SD-SDI connectors (optional) These are SD-SDI input connectors (BNC) with active thru output. > AC IN power socket This is the AC power socket.
7 How to use the on-screen menus Press the MENU/EXIT button to display the main menu on the screen. PICTURE This menu is used to perform the settings relating to the picture. 1 2 VIDEO CONFIG This menu is used to perform aspect and component input level settings.
8 [PICTURE MENU] MODE BROADCAST CONTRAST 60 BRIGHT 30 CHROMA 30 PHASE 30 SHARPNESS 30 AI OFF NR OFF COLOR TEMP D93 3D Y/C OFF [LORD FACTORY] MODE The video mode is selected here. ≥ BROADCAST This mode is set at the factory to best suit broadcast operations.
9 [SYSTEM CONFIG] BACKLIGHT 60 STATUS DISPLAY CONTINUE [INPUT SELECT] LINE B ON CMPNT ON SDI ON REMOTE OFF BACKLIGHT The backlight brightness is adjusted to a value from 0 to 60 here. 60 is the factory setting. STATUS DISPLAY The information displays during input switching and input signal system display are set here.
10 REMOTE specifications Pin No. 1 2 3 4 5 6 7 8 9 Signal Input switching function Aspect ratio switching function Standby function Tally function GND s s s s 54321 9 8 7 6 Connector (9P) In order to perform REMOTE operations, select ON as the setting for the REMOTE menu item on the SYSTEM CONFIG menu.
11 Rack mounting The unit can be mounted into a 19-inch standard rack (height: 7U size) if the optional rack-mounting adaptors (BT-MA1400G) are used. Refer to the following when attaching the adaptors.
12 Maintenance ≥ ≥ Wipe off any dust or dirt on the monitor and LCD panel with a soft cloth. For stubborn dirt or stains, wipe the monitor and LCD panel with a cloth that has been lightly dampened with well-diluted kitchen detergent and wrung out thoroughly, then finish it off with a dry cloth.
13 Specifications Power supply: AC 100 V to 240 V, 50-60 Hz Power consumption : 0.98 A to 0.54 A indicates safety information. Dimensions (W a a H a a D): 14 a 12-1/8 a 2-13/16 inch (main unit only) (356 a 308.5 a 71.5 mm) 14 a 13-3/8 a 7-3/8 inch (with monitor stand) (356 a 340 a 187 mm) Weight: 10.
14 Memo.
15 Memo.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE.
An important point after buying a device Panasonic BT-LS1400P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic BT-LS1400P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic BT-LS1400P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic BT-LS1400P you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic BT-LS1400P will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic BT-LS1400P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic BT-LS1400P.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic BT-LS1400P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic BT-LS1400P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
