Instruction/ maintenance manual of the product BT-LH1700WE Panasonic
Go to page of 30
ENGLISH DEUTSCH FRANÇAIS IT ALIANO ESP AÑOL S0805M1095 -H Printed in Japan VQT0U70-1 ENGLISH D Bef ore oper ating this product, plea se read the instruct ions carefully and sa v e this manual f or future use .
E-1 For Your Safety indicates safe ty information. Operating pr ecaution Operation near any appliance which gener ates strong magnetic f ields ma y give rise to noise in the video and audio signals .
E-2 ENGLISH For Your Safety (continued) indicates saf ety information. Information on Disposal f or Users of W aste Electr ical & Electronic Equipmen t (private households) This symbol on the products and/or accompanying documents means that used electr ical and electronic products should not be mix ed with general household waste.
E-3 • The liquid crystal por tion is manuf actured with highly precise te chnolog y . It includes ov er 99.99% eff ective pi x els, but 0.01% or less of the pix els are either missing, or ha ve fix ed lighting (red , blue , green). This is not a sign of malfunction.
E-4 ENGLISH The BT -LH1700W liq uid cr ystal monitor was design ed especially f or broadcasting service and business use . It is equipped with a high p erf or mance 17.
E-5 Video monitor unit Fr ont view Rear vie w Rear panel ( J page E-7 ) An embedde d audio un it (BT -Y AE1700G ) can be attached( J Inst allation Guide included).
E-6 ENGLISH PO WER switch This s witches the po wer supply ON/ OFF . When the po wer is ON, the LED (green) light s up . INPUT SELECT button This selects the signal input line . The green LED light abo ve the but ton indicates the selected input sig nal.
E-7 SDI (HD/SD) terminal (BNC) IN1 : This is the SD I input ter minal (c ompatible with HD/SD automatic s witching). IN2 : This is the SD I input ter minal (c ompatible with HD/SD automatic s witching). SWITCHED OUT : This is the active through -out ter min al for the SDI input sig nal bein g displayed on the screen.
E-8 ENGLISH 1. Attach the AC mains lead to the monitor unit . 2. Connect the A C mains lead to the power outlet. g When using e xternal DC po wer (DC11V–17V) Y ou can slide open the po wer co v er , and s witch from A C input to e xter nal DC input.
E-9 Three types of in f or mation are disp lay ed on the screen. The input signal status , picture a djusting knob status , and the menu display . 1. The selected input line ( J pa ge E-6, ) • VIDEO , Y/C, SDI1, SDI2, YP B P R /RGB-VIDEO/R GB-COMP .
E-10 ENGLISH 1. Push [MENU] to display the MA IN menu. 2. Push [ , ] to select the menu, then push [ENTER]. 3. Push [ , ] to select the sub menu, the n push [ENTER]. The setting v alues in the sub menu change to green. 4. Push [ , ] to select the setting v alues, t hen push [ENTER].
E-11 Y ou can change the menu setting v alues and picture adjusting kno b settings, then sav e and load up to 5 combinations of screen adjustme nt values as user dat a. Y ou can also return the setting value s and adjustment v alues to the f actor y preset settings .
E-12 ENGLISH Menu configuration MAIN VIDEO CONFIG SYSTEM CONFIG INPUT SELECT GPI MARKER GAMMA SELECT FILM GAMMA COLOR TEMP . SHARPNESS MODE SHARPNESS H SHARPNESS V I-P MODE MONO ANAMO SD ASPECT SCAN N.
E-13 The underlined v alues are f actor y preset setting v alues. *1 When controlling the marker setti ngs using the GPI function ( J page E-22), these setti ngs become disab led. These are not oper ated when the 2 screen s are displa yed . *2 These are only enab led when the HD signal and SD signal aspect ratio settings are 16: 9.
E-14 ENGLISH g 16:9 marker (Displa yed when using HD , or when using SD with a 16:9 aspe ct ratio) The marker is only displa yed as a v er tical bar . In addition, the section becomes the “MARKER BACK” item. VIST A marker , CNSCO marker A horizontal dotted line is display ed as the marker .
E-15 The underlined v alues are f actor y preset setting v alues. *1 Even if FILM gamma is changed during 2 screen displa y , only the main window is set, and the changes are not reflected in the sub windo w . *2 When “RGB-COMP . ” is selected in “YP B P R /RGB” in the “INPUT SELECT” men u ( J page E-20), this does not oper ate.
E-16 ENGLISH g WB adjustment mode Y ou can adjust “W HITE BALANCE V AR1” – “WHITE BALAN CE V AR3” (WB) b y selecting “V AR1” – “V AR3” in “COLOR TEMP . ” in th e “VIDEO CONFIG ” menu. The underlined v alues are f actory preset setting v alues.
E-17 The underlined v alues are f actor y preset setting v alues. *1 When the monitor is shipped f rom the f actory , “USER1” – “USER5” and “F A CT OR Y” all hav e the same details . *2 This screen is not displa yed when “RGB-COMP . ” is selected in the “ YP B P R /RGB” menu in the “I NPUT SELECT” menu.
E-18 ENGLISH g About the SUB WINDO W Y ou can compare sav ed still and moving images or show the W av e Form Monitor (WFM) by using the “SUB WINDOW” function to separate th e main wind ow into 2 displays as shown below .
E-19 The “GPI CONTR OL ” item is used to set enab le/disab le of all GPI functions , and assigns functions to each of the GPI ter minal pins ( J page E-22). The underlined v alues are f actor y preset setting v alues. Note: Please be a ware that the f ollowing can not be perf or med.
E-20 ENGLISH The underlined v alues are f actory preset setting v alues. *1 “A UT O” is set when the monitor is shipped from the factory , but if there are concerns about noise etc. from outside the input signal, we recommend assigning specific f or mat.
E-21 g “PHASE” and “CLOCK” factory preset sett ing valu es Adjusting the speak er output. This can only be set when th e monito r is equipped with an embedd ed audio unit BT - Y A E1700G (optional). If the monitor is not eq uipped with an embedd ed audio unit, the output will be in analog.
E-22 ENGLISH REMO TE operation is possible on this monitor using the GPI/RS-232C terminal. Each of the items in the GPI screen ar e compatible with the f ollowing ter minals. Y ou can assign functions to each terminal in the menu GPI screen ( J p age E-19).
E-23 g Assignment of item priority levels • When both “MARKER1” and “MARKER2” are ON at the same time, “ MARKER1” has priority . • When both “MARKER BACKHALF” and “MARKER BA C KBLA CK” are ON at the same time, “MARKER BA CKBLACK” has priority .
E-24 ENGLISH g Setting command No Command Explanation Data Response 1 IIS Input s witch 0: SDI 1 1: SDI2 2: VIDEO 3: YP B P R /RGB 4: Y/C IIS 2 VPS Image qu ality adjustment CON00-60 : Contr ast setti.
E-25 g Query command No Command Explanation Data Response 1 QIS Input selection 0: SDI1 1 : SDI2 2: YP B P R 3: RGB-V IDEO 4: VIDEO 5: Y/C 6: RGB-COMP .
E-26 ENGLISH If yo u use rac k-mounting adap tors BT -MA1710G (option a l) with this monitor , you ca n incor porate a 19-inch standard rac k (the height is 7U size). Please see the instructions below f or attachment. 1. Remo ve the scre ws on the bac k and base of the monitor (3 place s), and remo ve the stand.
E-27 Maintenance inspecti ons are necessary for the user to use this equipmen t saf ely . It is impor tant to k eep monitor functions in good condition at all time s through periodical and appropriate maintenance .
E-28 ENGLISH g List of compatible sign al formats *1 When 1035/59.94I signal is input, displaye d as 1080/59.94I. Other vari ous mar ker displa ys will use the 1080/ 59.94I mark er . *2 When 1035/60I signal is input, di spla yed as 1080/60I. Other v arious marker displays will use the 1080/60I marker .
E Matsushi ta Electric Industrial Co., Ltd. W eb Site: http://www .pana sonic.co .jp/global/ © 2005 Matsushita Electric In dustria l Co., Ltd. All Rights Reser ved.
An important point after buying a device Panasonic BT-LH1700WE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic BT-LH1700WE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic BT-LH1700WE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic BT-LH1700WE you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic BT-LH1700WE will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic BT-LH1700WE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic BT-LH1700WE.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic BT-LH1700WE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic BT-LH1700WE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
