Instruction/ maintenance manual of the product AW-LK30 Panasonic
Go to page of 11
Model No. A W -LK30 Before attempting to connect or operate this product, please read these instructions completely and save this manual for future use.
-2- NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro - vide reasonable protection against harmful interference when the equipment is operated in a commercial environ - ment.
-3- CONTENTS WARNING/CAUTION FOR SAFETY .................................................................................................... ...................................... 4 PREFACE .............................................................
-4- W ARNING/CAUTION FOR SAFETY W ARNING • Refer all servicing to qualified personnel To reduce the risk of electric shock, don't remove cover or back, unless you are a qualified personnel. Refer all mountings, connections, servicing to quali- fied service personnel.
-5- The AW-LK30 is a lens controller for motor-driven lens- es that have a zoom/focus control cable (fitted with a 12-pin female connector). Connected to a lens control cable, it permits local control of lens zoom, focus, and iris. (Applicable lenses: Panasonic AW-S14XBMD, AW- LZ10MD6, AW-LZ14MD55, etc.
-6- MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS TELE WIDE IRIS ZOOM H L OPEN CLOSE AUTO MANU FAR H L NEAR FOCUS SPEED q Zoom Speed Control [ZOOM SPEED L/H] To adjust lens zoom control speed. Turning it clockwise increases speed. w Zoom Control Tele Switch [ZOOM TELE] The lens zooms in the telescopic direction while the switch is kept depressed.
-7- t Focus Control Near Switch [FOCUS NEAR] The lens focus draws near while the switch is kept depressed. y Focus Control Far Switch [FOCUS FAR] The lens focus moves far while the switch is kept depressed. u Iris Auto/Manual Switch [IRIS AUTO/MANU] At AUTO, the iris is automatically controlled (ALC).
-8- INST ALLA TION – + MENU ITEM/AWC YES/ABC NO/BAR OPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN Remote (zoom/focus control) cable Camera cable Zoom lens Camera To Iris connector TELE WIDE .
-9- Power supply: 12 V DC, 60 mA (supplied from lens) Lens control: Zoom: Speed, tele/wide Focus: Speed, near/far Iris: Auto/manual, open/close Connecting cable length: 190 cm Operating temperature ra.
-10- ST ANDARD ACCESSORIES Clamper ........................................ 1 each, right and left Clamp screw ........................................
NM0799-0 7J1A332A Printed in Japan PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W.
An important point after buying a device Panasonic AW-LK30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic AW-LK30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic AW-LK30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic AW-LK30 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic AW-LK30 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic AW-LK30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic AW-LK30.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic AW-LK30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic AW-LK30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
