Instruction/ maintenance manual of the product AK-HRP200G Panasonic
Go to page of 26
Model No. AK-HRP200G Operating Instructions <Operations and Settings> Remote Operation Panel VQT4S52A (E) z How the operating instructions are organized • Basics: This manual describes how to connect the unit to the required equipment and set it up.
2 3 .
2 3 This unit is a remote operation panel for controlling a studio handy camera (AK-HC3800) and a camera controller unit like the AK-HCU200.
4 5 Setup mode allows the user to make a variety of unit settings, and save and load scene files and user files. Normal operation is unavailable during setup mode operation. ROP menu (REMOTE OPERATION MENU) operation is not available either.
4 5 Setup mode differs from normal operating modes.
6 7 Setup mode is comprised of the menus and submenus listed in the table below.
6 7 Menu numbers 10 to 15 are for future use. .
8 9 • To cancel loading, select [n] and press <EXECUTE>. • The file is loaded from the memory card and [Fin] appears when loading ends. • [E02] is displayed if the load operation from the memory card fails.
8 9 .
10 1 1 .
10 1 1 .
12 13 .
12 13 A file with the same name already exists.
14 15 The unit can access the picture monitor on a CCU to control the ROP menu (REMOTE OPERATION MENU).
14 15 When a menu has more than one setting on a line, press <SELECT> (to confirm) and the cursor [ ] appears.
16 17 The following describes [ROP MENU] settings. ＊＊ ＳＨＡＤＩＮＧ （ ＷＨＩＴＥ ） .
16 17 ０． ４５０ ＊＊ ＧＡＭＭＡ／ＢＬＡＣ.
18 19 • Some settings in this menu are not available when the [CINEMA GAMMA SWITCH] is set to [ON].
18 19 → ＊＊ ＭＡＴＲＩＸ （ ２／２ ） ＊＊ １２Ａ.
20 21 Cha.
20 21 Lowers the detail in dark areas.
22 23 → ＊＊ ＳＹＳＴＥＭ （ ２／２ ） ＊＊ ＨＤ.
22 23 Sets the operation of the ND filter when auto setup is started.
24 25 Camera number ...................................................................................... 7 CINEMA-GAMMA ................................................................................ 17 Confirm version .........
24 25 Memo.
Web Site: http://panasonic.net プロフェッショナルAVビジネスユニット 〒 571-8503 大阪府門真市松葉町 2 番 15 号 ☎ (06) 6901－1161 © Panasonic Corporation 2012.
An important point after buying a device Panasonic AK-HRP200G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic AK-HRP200G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic AK-HRP200G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic AK-HRP200G you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic AK-HRP200G will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic AK-HRP200G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic AK-HRP200G.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic AK-HRP200G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic AK-HRP200G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
