Instruction/ maintenance manual of the product 85VX200U Panasonic
Go to page of 68
TH - 103VX200U TH- 85VX200U Model No. Operating Instructions High De fi nition Plasma Display English Before connecting, operating or adjusting this product, please read these instructions completely .
2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons.
3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit from your set, please r ead these Instructions befor e making any adjustments, and r etain them for future r efer ence.
5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.
7 Safety Precautions The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
8 Safety Precautions W ARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear . Lithium Battery Batteries must not be exposed to excessive heat such as sunshine, fi re or the like.
9 Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc. When preparing your own 3D content, ensure that it is properly produced. Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions.
Use the clamper when connecting a LAN cable. (see page 58) These accessories will be used by professional installers when they install the unit. TH-85VX200U TH-103VX200U Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity (+ and -).
11 Connections AC cord connection and fi xing, cable fi xing TH-85VX200U 1 2 Note: T wo fi xing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately . – How to Unfasten the AC cord – Cable fi xing bands Secure any excess cables with bands as required.
12 Connections 1 2 TH-103VX200U T o secure cables connected to T erminals, wrap the cable fi xing band around them then pass the pointed end through the locking block, as shown in the fi gure.
13 V ideo equipment connection AUDIO OUT connection Connections COMPONENT/RGB IN Component/RGB Video Input T erminal (see page 14) A V IN (HDMI 1-4) HDMI Input T erminal (see page 14) PC IN PC Input T erminal Connect to video terminal of PC or equipment with Y , P B (C B ) and P R (C R ) output.
14 Connections HDMI connection [Pin assignments and signal names] 19 3 1 4 2 18 Note: Additional equipment and HDMI cable shown are not supplied with this set. Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S Data2+ 11 T .M.D.S Clock Shield 2 T .M.D.
Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Stereo mini plug (M3) Audio Connect a cable which matches the audio output terminal on the computer .
COMPUTER RS-232C Straight cable D-sub 9p (Male) (Female) 6 7 8 9 1 3 4 52 16 The SERIAL terminal is used when the Plasma Display is controlled by a computer . Note: T o use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK SETUP” menu to “RS-232C”.
Connecting the AC cord plug to the Plasma Display . For TH-103VX200U Fix the AC cord plug securely to the Plasma Display with the clamper . (see page 12) Remote Control Sensor Power Indicator Right side surface Main Power On / Off Switch Connecting the plug to the W all Outlet.
18 OSD LANGUAGE Power ON / OFF English (UK) Deutsch Français Italiano ENGLISH (US) Русский OSD LANGUAGE Español Notes: Once the language is set, this screen won’t be displayed • when switching on the unit next time. After the setting, language selection can be done from • the SET UP menu.
19 Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display . HDMI input terminals in HDMI 1 to HDMI 4. Component or RGB input terminal in COMPONENT/RGB IN.* PC input terminal in PC IN.
INPUT MENU ENTER/ 20 Up / Down button When the menu screen is displayed: “ ▲ ” : press to move the cursor up “ ▼ ” : press to move the cursor down (see page 27) MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch.
21 Basic Controls Remote Control T ransmitter Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 17). Press this button to turn the Plasma Display On, from Standby mode.
ENTER/ Right side surface 22 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 64).
23 V iewing 3D images Y ou can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). This display supports “Frame Sequential* 1 ”, “Side by Side* 2 ” and “T op and Bottom* 3 ” 3D formats.
24 Replacing the battery ■ When the battery is running low , the indicator lamp fl ashes 5 times on turning the 3D Eyewear on. In this case, early battery replacement is recommended. • Dispose of the old batteries as non-burnable rubbish, or in line with the waste disposal regulations in your local area.
25 T o view the 3D images V iewing 3D images T o view the contents of the Frame Sequential format (ex. 3D-compatible Blu-ray Disc, etc.) with 3D effect Connect the 3D-compatible player via an HDMI cable (see page 14) and playback the contents. • Use fully wired HDMI compliant cable.
26 T roubleshooting for 3D Eyewear T able of images that can be seen for each 3D Picture Format and the source image format Symptoms Checks Cannot see 3D images • Has the 3D Eyewear been switched On? • Ensure that “3D EYEWEAR” in “3D SETTINGS” is set to “ON”.
27 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press MENU Press several times. Each time the MENU button is pressed, the menu screen will switch.
28 Adjusting POS. /SIZE 1 Display the menu screen. 2 Select “POS. /SIZE”. SET UP POS. /SIZE SOUND PICTURE 2 access 1 select 3 Select the item and set. 2 adjust 1 select 1:1 PIXEL MODE H-POS 0 0 0 H-SIZE AUTO SETUP NORMALIZE V -POS 0 V -SIZE 0 DOT CLOCK 0 0 CLOCK PHASE CLAMP POSITION OFF UNDER SCAN OFF 4 Exit the menu.
29 Adjusting POS. /SIZE ● AUTO SETUP H-POS/V -POS, H-SIZE/V -SIZE, DOT CLOCK and CLOCK PHASE are automatically adjusted when the RGB or PC signal is received.
30 Adjusting POS. /SIZE ● 1:1 PIXEL MODE Adjusts the display size when 1 125i, 1 125p or 1250i signal is input. Notes: • Select ON when you would like to replay 1920 × 1080 input signal.
31 PICTURE Adjustments 1 Display the menu screen. 2 Select “PICTURE”. SOUND PICTURE SET UP POS. /SIZE 2 access 1 select 3 Select the item and set. 2 adjust 1 select ST ANDARD ADV ANCED SETTINGS PICTURE MENU 25 0 5 NORMAL PICTURE NORMALIZE BRIGHTNESS 6 COLOR 0 TINT SHARPNESS COLOR TEMP 4 Exit the menu.
32 PICTURE Adjustments ● PICTURE MENU Y ou can switch to the optimal picture mode for the video source and viewing environment. MONITOR ST ANDARD CINEMA DYNAMIC ST ANDARD: For viewing in standard (evening lighting) environments. This menu selects the normal levels of BRIGHTNESS and PICTURE.
33 Enables fi ne picture adjustment at a professional level. Notes: The adjustment values are memorized separately for each input terminal. • The adjustment range values should be used as an adjustment reference. • Select the item and set. ADV ANCED SETTINGS Carry out “W/B” adjustment as follows.
34 On the remote control unit, while the “ADV ANCED SETTINGS” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
35 Select the item and set. Color space adjustment (COLOR GAMUT) Changes the color space to BT .709 signal standard chromaticity point and fi ne-tunes it.
36 ● RESET Resets the adjustment value of color space. Note: This setting is re fl ected only for the selected input terminal and the “PICTUR MENU”. 1 Select “RESET”. R RA TIO G RA TIO B RA TIO RG B COLOR GAMUT EDIT RESET COLOR GAMUT CUSTOM 65535 2900 0 21 10 65535 0 0 1760 65535 2 access 1 select 2 Select “OK”.
37 On Onscreen display Off All Aspect Off Auto Setup Off Studio mode 3D settings Function button assign 1 INT 3D Emitter Signal Function button assign 2 On 3D Safety Precautions Memory lock Picture Pr.
38 Follow these steps to save picture adjustment values as pro fi les. Note: When the settings are locked in “EXTENDED LIFE SETTINGS”, pro fi les cannot be saved. Saving pro fi les 1 Specify the picture quality in the PICTURE menu and ADV ANCED SETTINGS.
39 Picture Pro fi les Load pro fi les and apply the picture adjustment values to the display as follows. Notes: • Loaded pro fi les are stored in memory according to the selected input interface. (see page 19) • When the settings are locked in “EXTENDED LIFE SETTINGS”, pro fi les cannot be loaded.
40 Picture Pro fi les Delete or rename pro fi les as follows. <Deleting pro fi les> Note: Locked pro fi les cannot be deleted. <Renaming pro fi les> Note: Locked pro fi les cannot be renamed. Editing pro fi les 1 In the PICTURE menu, select “MEMORY EDIT”.
41 Picture Pro fi les Y ou can lock saved pro fi les to restrict operations when the pro fi les are loaded. Y ou can also set passwords. Notes: • When the lock is set in “EXTENDED LIFE SETTINGS”, pro fi le cannot be locked. • If pro fi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are restricted.
42 Picture Pro fi les <isf Mode Setting> Switches to “PICTURE MENU” mode display . 1 Follow steps 1–5 in the previous procedure, <Locking and unlocking pro fi les>. 2 Select “isf Mode”. Lock1 Change password MEMORY1 Off Off MEMORY2 MEMORY12 Off isf Mode 2 adjust 1 select 3 Specify “On” or “Off”.
43 SOUND Adjustment 1 Display the menu screen. 2 Select “SOUND”. SET UP POS. /SIZE SOUND PICTURE 2 access 1 select 3 Select the item and set. 2 adjust 1 select BALANCE 0 1 NORMALIZE VOLUME 4 Exit the menu.
44 1 Display the menu screen. 2 Select “SET UP”. SET UP POS. /SIZE SOUND PICTURE 2 access 1 select 3 Select the item and set. EXTERNAL SCALER MODE POWER SA VE PC POWER MANAGEMENT AUTO POWER OFF OF.
45 EXTERNAL SCALER MODE OFF ON This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment. The setting is valid with the following input signals. 1 125 (1080) / 24p·25p·30p·50p·60p OFF: Use the built-in scaler .
46 SET UP menu POWER SA VE PC POWER MANAGEMENT AUT O POWER OFF OSD DESIGN OSD POSITION OSD LANGUAGE OFF ON When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. OFF ON Equipment power supply is turned OFF when there is no signal.
47 SET UP menu 3D SETTINGS If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings. EXTERNAL SCALER MODE POWER SA VE PC POWER MANAGEMENT AUTO POWER OFF OF.
AUTO SYNC 1024 ×768 33.7 kHz 60.0 Hz 1 125(1080)/60i XGA MODE H-FREQ. V -FREQ. SIGNAL FORMA T SIGNAL [ RGB ] ON FRAME CREA TION AUTO 33.7 kHz 60.0 Hz 1 125(1080)/60i XGA MODE H-FREQ. V -FREQ. SIGNAL FORMA T SIGNAL [ COMPONENT ] ON 3D Y/C FIL TER AUTO COLOR SYSTEM SIGNAL [ VIDEO ] SIGNAL [ Digital ] ON 24p SMOOTH FILM 33.
49 SET UP menu • SYNC This function operates only during input from PC IN terminal. Setting RGB sync signal Con fi rm that the input is set to RGB input (this setting is valid only for RGB input signal). AUTO: The H and V sync or synchronized signal is automatically selected.
50 SCREENSA VER SET UP menu Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSA VER should be used.
51 SET UP menu EXTERNAL SCALER MODE POWER SA VE PC POWER MANAGEMENT AUTO POWER OFF OFF OFF OFF OFF OSD DESIGN TYPE1 OSD POSITION UPPER LEFT OSD LANGUAGE ENGLISH ( US ) SIGNAL EXTENDED LIFE SETTINGS SC.
52 EXPRESS SETTINGS Set the “Image Retention Reduction” menu to the recommended settings. All menus will be locked. PICTURE MENU: ST ANDARD PICTURE: Recommended setting for each model SIDE BAR ADJUST : BRIGHT NANODRIFT SA VER: MID PEAK LIMIT : ON 1 Select “EXPRESS SETTINGS”.
53 SET UP menu CUSTOM SETTINGS Set the individual “Image Retention Reduction” menu. 1 Select “CUSTOM SETTINGS”. CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS EXPRESS SETTINGS 2 access 1 select 2 T o set each menu to the recommended setting: Select “RECOMMENDED SETTINGS”.
54 SET UP menu This function can change the label of the Input signal to be displayed. (see page 19) Customizing the Input labels EXTERNAL SCALER MODE POWER SA VE PC POWER MANAGEMENT AUTO POWER OFF OF.
SIGNAL EXTENDED LIFE SETTINGS SCREENSA VER INPUT LABEL COMPONENT/RGB-IN SELECT RGB 3D SETTINGS NETWORK SETUP 192.168. 0. 8 1024 255.255.255. 0 192.168.
Item Adjustments Onscreen display On: Displays all the following on screen. • Power on display • Input signal switch display • No signal display • Remainig time of of f-timer after was pressed. Off: Hides all the items above from view . All Aspect Sets All Aspect mode (advanced aspect setting) or default aspect mode.
OPTIONS Adjustments Item Adjustments 3D Emitter Set the infrared transmitter for the 3D Eyewear . INT : Use the infrared transmitter of the unit. EXT : Use the external 3D IR TRANSMITTER (available separately .
Using Network Function This unit has a network function to control the network connected display with your computer . Note: T o use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”.
Using Network Function PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup • Display status query Supported commands Commands to control the unit with PJLink™ protocol are shown in the table below .
Unit Setup Set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”. (see page 55) Computer Setup Disable the proxy server settings and enable JavaScript. Y ou can use a Web browser to control the unit and set up a network and password.
Using W eb Browser Control TOP screen structure of the W eb browser control After logging in, the T OP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC CONTROL BASIC CONTROL screen is displayed.
Notes: • T o use a DHCP server , make sure the DHCP server is started. • During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GA TEW A Y values cannot be entered. • When the set values are changed properly , “NETWORK SETTING CHANGED.” message and the changed set items are displayed.
T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.
List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 FULL The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed.
Applicable Input Signals * Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) HDMI1-4 1 525 (480) / 60i 15.73 59.94 * (13.5) * 2 525 (480) / 60p 31.47 59.94 * (27.
Note: Press to return to SET UP menu when con fi rmation screen is displayed. [from the unit] 1 Press the MENU button till the SET UP menu is displayed. 2 Press the or button to select “OSD LANGUAGE”. 3 Press the ENTER button for more than 5 seconds.
Speci fi cations TH-85VX200U TH-103VX200U Power Source 120 V AC, 50/60 Hz 200-240 V AC, 50/60 Hz Power Consumption Rated Power Consumption 1,250 W 1,400 W Stand-by condition 0.
Panasonic Solutions Company Unit of Panasonic Corporation of North America Executive Of fi ce : Three Panasonic W ay 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 Customer ’ s Record The model number and serial number of this product can be found on its back cover .
An important point after buying a device Panasonic 85VX200U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic 85VX200U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic 85VX200U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic 85VX200U you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic 85VX200U will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic 85VX200U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic 85VX200U.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic 85VX200U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic 85VX200U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
