Instruction/ maintenance manual of the product VCR2120 Palsonic
Go to page of 25
Instruction manual Video cassette recorder VCR 2120 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.
WORTH knowing Please keep the video machines guarantee card and receipt safe for warranty purposes. Precautions Read carefully through this manual to familiarize yourself with this high-quality video recorder. Make sure the rating of your household electricity supply matches that shown on the back of the video recorder.
Tuning in new stations Contnets WORTH knowing Before doing anything with the machine, please read the chapter “Initial installation". Controls The remote control unit .............................................................................
The remote control unit CONTROLS The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine. Press any button to turn on the power. The buttons to use are marked on the following pages.
2x On screen display The machine CONTROLS Press any button to turn on the power . standby/on playback stop and ejecting the cassette front input sockets for connecting a camcorder programme (station) .
Fitting the remote control's batteries Connecting up the video recorder Place your video horizontally on a flat, steady base so that air can circulate around it for ventilation away from humidity and heat, magnetic fields, such as those from loudspeakers etc and with no heavy objects placed on top Initial INSTALLATION , 1.
Setting up the video recorder Switch the TV on You can also start "Auto Search" in the menu "PR PRESET" "Auto Search" To tune in new stations (manual tuning) and to enter.
PLAYING Your TV and your video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button cassettes Start playback. Stop playback Fast forward or rewind the cassette from stop When you load a protected cassette (e.
CM Skip Accessing new recordings (index scan) Variable slow motion Variable picture search Still PLAYING cassettes Still picture from playback. Each press of the button advances the picture one frame.
Simple recording The TV stations on the video have been tuned in (page 5). The video is switched on. You can either watch the picture from the video on the TV by pressing the station button reserved for video input or the AV button, watch another TV station or switch off the TV altogether.
One touch recording - OTR RECORDING cassettes For timer recordings, clock, date, and stations must be set correctly Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording Choose the station you want and press the button once for every 30 minutes of programme you wish to record.
Normal timer recording For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording. Call the video's "MAIN MENU", choose "Timer Program".
Setting time and date Call the video's "MAIN MENU", choose "T imer Program Select the programming to change or erase. If you want to erase this programming press button 0, confirm with OK. If you wish to make changes: Move to the position you want to change using the buttons.
Accessing counter zero position Remaining time and cassette length Clock / counter display The counter counts in real time from the point you load the cassette This does not have to be its beginning! The counter does not count unrecorded parts of the tape If you rewind beyond the zero position, the counter counts in negative values (e.
Child Lock and... Cassettes Menu languages Call the video's "MAIN MENU", choose "VCR Setup", then "Language Set" Select your language Confirm.
Tuning The TV and video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio / Video) button. "AV" should not be selected with the AV button on the video. Call the video's "MAIN MENU", choose "PR Preset".
Station names Tuning in N E W STATI 0 N S If your video is showing no station name or is showing a station name incorrectly, you can correct this. Select " : name correct" on the "MANUAL SET" menu. Call this menu (just see the left page), if it isn't displayed.
Clearing programme locations Sorting programme locations Tuning in NEW STATIONS If the location numbers used for programmes stored in your TV and video are different, you can change them on the video. To do this, move the stations to the right numbers, until they are arranged the way you want.
To the TV via antenna cable (if you are not using a RCA cable) If you are using a RCA cable, select the AV input on the TV to see the picture from the video If you are not using a RCA cable, select th.
Assembling To copy to your video from another video machine, connect the two machines with a cable between their RCA sockets and select as programme "AV" using the AV button. Set the other video machine to playback and your machine to record.
for experienced users BRIEF INSTRUCTION Playing back Your TV and your video recorder are switched on To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button. Start playback Stop playback Fast forward or rewind the cassette from stop Still picture from playback.
Call the video's "MAIN MENU", Confirm, choose "Timer Program". for experienced users BRIEF INSTRUCTION For timer recordings, clock, date, and stations must be set correctly. Load a cassette with safety tab in place (page 13) and with sufficient free space for the recording.
Before you ask a specialist Mains supply thevideo's display does not light the video doesn't work Recording doesn't start the cassette starts playback or is ejected Playback no picture .
12 5/14-17 13 7 Precautions 12 Cassette length .................................... Channel ....................................... Child lock ............................................. CM Skip ............................................... Condensation .
Instruction Manual Pages 4-5 VCR 2120 Unplug the aerial cable from your TV and plug it into the socket "ANT.IN" of the video. Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV.
An important point after buying a device Palsonic VCR2120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic VCR2120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic VCR2120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic VCR2120 you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic VCR2120 will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic VCR2120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic VCR2120.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic VCR2120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic VCR2120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
