Instruction/ maintenance manual of the product MX279H Asus
Go to page of 23
MX279 LCD Monitor U ser G uide.
ii Copyright © 2012 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a r.
iii Table of contents Notices ......................................................................................................... iv Safety information ....................................................................................... v Care & Cleaning .
iv Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
v Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet.
vi Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
vii Wheretondmoreinformation Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products.
1-1 ASUS LCD Monitor MX279 1.1 Welcome! Thank you for purchasing the ASUS ® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience.
1-2 Chapter 1: Product Introduction 1.3 Monitor introduction 1.3.1 Front view 7 4 6 1. Button: • Activates the QuickFit function. (Please refer to 1.
1-3 ASUS LCD Monitor MX279 Press (Input Select button) to display HDMI signals after you connect HDMI cable with the monitor. 7. Power Button/Power Indicator: • Press this button to turn the monitor on/off. • The color definition of the power indicator is as the table below.
1-4 Chapter 1: Product Introduction 1.3.2 Back view VGA HDMI-2 HDMI-1 VGA HDMI-2 HDMI-1 4 1. HDMI port : This port is for connection with an HDMI compatible device. 2. VGA port : This 15-pin port is for PC VGA connection. 3. Audio-in port : This port connects PC audio source by the bundled audio cable.
1-5 ASUS LCD Monitor MX279 1.3.3 QuickFit Function The QuickFit function allows users to have a preview of the document or photo layout directly on screen without printing test copies. QuickFit has three patterns: a. Grid pattern : Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.
2-1 Chapter 2: Setup 2.1 Assembling the monitor base 2.1.1 Assembling the base 1. Have the front of the monitor face down on a table. 2. Attachthebasetothearmandxwiththescrewtojointhemtightly. Youcaneasilytightenthescrewbyngers.
2-2 ASUS LCD Monitor MX279 2.1.2 Detaching the base 1. Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. 2. Useyourngerstoloosenthescrewlocatedatthebottomofthe base, and remove the base from the stand.
2-3 Chapter 2: Setup 2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling while changing its angle.
2-4 ASUS LCD Monitor MX279 • To connect the power cord: a. Connect the adapter to the monitor's DC input. b. Connect one end of the power cable to the adapter, and the other end to a power outlet. • To connect the VGA/HDMI cable: a. Plug one end of the VGA/HDMI cable to the monitor's VGA/HDMI port.
3-1 Chapter 3: General Instruction 3.1 OSD (On-Screen Display) menu 3.1.1 Howtorecongure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button.
3-2 ASUS LCD Monitor MX279 2. Color You can adjust Brightness, Contrast, Saturation, Color Temp., and Skin Tone from this menu. • Brightness : the adjusting range is from 0 to 100. button is a hotkey to activate this function. • Contrast : the adjusting range is from 0 to 100.
3-3 Chapter 3: General Instruction • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal distrubances. • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep.
3-4 ASUS LCD Monitor MX279 3.2 SpecicationsSummary Panel Type TFT LCD Panel Size 27” (16:9, 68.6 cm) wide screen Max. Resolution 1920 x 1080 Brightness (Typ.
3-5 Chapter 3: General Instruction Voltage Rating AC 100~240Vac, 50/60Hz (AC adaptor: ENERTRONIX-EXA1203YH / Delta-ADP-65GD B) Power Consumption Power On: 37W (max), Standby: < 0.5 W (AC110V) / 0.55 W (AC220V), Power Off: < 0.5 W (AC110V) / < 0.
3-6 ASUS LCD Monitor MX279 3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the adapter and power cable are properly connected to the monitor and the power outlet.
3-7 Chapter 3: General Instruction 3.4 Supported operating modes Mode Resolution Refresh Rate Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel (MHz) DOS 720x400@70Hz 900x449 31.469 70.087 28.322 VGA 640x480@60Hz 800 x 525 31.469 59.940 25.175 640x480@72Hz 832 x 520 37.
An important point after buying a device Asus MX279H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus MX279H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus MX279H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus MX279H you will learn all the available features of the product, as well as information on its operation. The information that you get Asus MX279H will certainly help you make a decision on the purchase.
If you already are a holder of Asus MX279H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus MX279H.
However, one of the most important roles played by the user manual is to help in solving problems with Asus MX279H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus MX279H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
