Instruction/ maintenance manual of the product 3499G Palsonic
Go to page of 31
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 34CM CORDLE.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Clock/Game/Calendar English/French/Spanish/Indonesian on-screen display Hyperband 255 preset channels Automatic channel preset Full function remote control AV input & S-VIDEO input terminals Digit.
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture.
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. High voltage exists in this TV set. Do not remove the cover 5 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation.
1. AV/TV button: Video input select. 2. MENU button: To enter into menu operation. 3. VOL- button: volume down adjust; menu item adjust 4. VOL+ button: volume up adjust; menu item adjust. 5. CH- button: channel down select; menu item select. 6. CH+ button: channel up select; menu item select.
Back 1. Antenna input 2. S-VIDEO input 3. AV input (VIDEO, AUDIO L/MONO, R) 4. AV output (VIDEO, AUDIO L/MONO, R) 5 2 3 4 1.
6 Notes: In most cases, the function CH+/- buttons are equal to the buttons, and the function of VOL+/- buttons are equal to the buttons. Identification of Controls (continued) ! / Remote Controller D.
! Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
Connect to video and audio equipment This TV set provides AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
Menu Introduction In MENU operations, the CH+/- (or ) buttons are used to select item upwards or downwards; the VOL+/- (or ) buttons are used to adjust or confirm selected item.
! Notes: In most cases, the function of CH+/- buttons are equal to the buttons; and the function of VOL+/- buttons are equal to the buttons. ted and there are some items that are not displayed yet, the or symbol twinkles. perations (Press HELP button to display/cancel this help bar).
2. 1. Turning off ! Press the Power Switch on the TV set. If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the AV/TV button on the set to turn on.
Select Input Signal 4. 3. 2. 1. Press AV/TV button on the TV set or AV button on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals. If you want to switch to TV press AV button again or follow step 2, 3 or 4.
Auto Search Enter the Program menu and select Auto item. Press VOL+ or VOL- button and the TV set starts Auto Channel Preset. All Active channels will be preset and stored into the memory automatically. After presetting, the TV will stop at the last channel program.
You can skip unnecessary channels by using Skip function when you browse by CH+/- buttons. Fine tuning Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.
Setting colour system If the picture colour is abnormal, maybe the colour system setting is wrong. Then you can adjust colour system as follows. Setting sound system If the sound is abnormal, maybe the sound system setting is wrong. Then you can adjust sound system as follows.
168 8 Press 0-9 direct channel selector. Channel Selection 1. Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press -/-- button repeatedly to display "-". To select two-digit channel: Press -/-- button repeatedly to display "--".
100 Item Standard Softness Brightness Contrast weaker Color paler deeper Sharpness darker lighter softer sharper Picture mode Dynamic Contrast Color 80 50 50 80 50 1 . Press MENU button to display Picture menu. 2 . Press CH+/- button to select item. 3 .
Press MUTE button, and the volume decreases to half of the original volume before you adjust. This mode is useful when many people are watching TV and one of them is going to answer a telephone call. 2. Use MUTE button. 1. Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases.
Please enter the Clock menu and select Sleep item. Press VOL+ or VOL- button to select between Off, 10, 20, 30, 40, 50 and 60 (minutes). When the sleep time elapses, the TV set goes to STANDBY automatically. Please enter the Clock menu and select Timer item.
Setting ON timer Please enter the Clock menu and select TimeOn item. Press VOL+ or VOL- button to set ON Time. After you finish setting Time On item, press the STANDBY button on the remote control. Then the TV set auto turns on when your preset time elapses.
In Calendar interface, press CH+/- buttons to select year , month or date ; press VOL+/- buttons to adjust. The Calendar is from 1901 to 2050. 22 Setting OSD language Setting blue background System Setting 1. Press MENU button twice to display System menu.
Playing Game Please enter the System menu and select Game item. Press VOL+ or VOL- button to enter Game Select menu. How to play the name? Description of icons: :the man you control.
Please enter the System menu and select SafeMode item. Press VOL+ or VOL- button to enter SafeMode menu If you never set password for Safe Mode or you set the SafeMode item to Off , you can directly enter into SafeMode menu without password, otherwise, a four digit password is necessary before you can enter into SafeMode menu.
Please enter the SafeMode menu and select CH.Limit item. Press VOL+ or VOL- button to select the limitation channel number ranging from 0-254. For example, you can set the limitation channel number to 99, the the user can only select the channel from 0-99.
Please enter the SafeMode menu and select OnSearch item. Press VOL+ or VOL- button to select On or Off . If you set this item to On , next time you turn on by Power Switch , the TV set searches program and set system automatically (please make sure that the antenna connection is OK before you turn on) .
Remote controller does not work Unevenness in colour in some parts of the screen Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Even if the picture or the sound is normal, changes in room temperature sometimes makes the TV cabinet expand or contract, making a noise.
! TV system & channel range Power Supply: Power Consumption: Dimensions(mm): Weight(kg): CRT: AC 240V, 50Hz 60W 366(W) x 333(H) x 373(D) 12 34cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S41.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-J14F3-.
An important point after buying a device Palsonic 3499G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 3499G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 3499G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 3499G you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 3499G will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 3499G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 3499G.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 3499G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 3499G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
