Instruction/ maintenance manual of the product 3490 Palsonic
Go to page of 18
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 34CM C.
This equipment has been designed and manufactured to meet the highest international standards, but, like any electrical apparatus which is operated at mains voltage, care must be taken if you are to obtain the best results and safety is to be assured.
2 ANTENNA INPUT SHARPNESS LANG PIC SOUND STAND BY - VOL PR OPERATION INSTRUCTION POWER SWITCH AND STANDBY BUTTON Press POWER SWITCH, the TV set will be in STANDBY mode, and the indicator is red. In STANDBY mode, press any one of the following buttons could turn on the TV: a.
3 TELEVISION FUNCTIONAL DESCRIPTION MENU DRIVEN SELECTION RED KEY This key activates the SOUND menu as shown below:- For the stereo chassis: Red Green Yellow Blue * * * * The colour of the analog bar depend on the item selected For the mono chassis, the menu is as shown: - 1.
4 NOTE: The instruction with "#" symbol is only applicable when AV IN signal is NTSC system or the TV set is selected NTSC system. 1. 2. 3. * When this menu is first activated, no bar display will be shown. When RED key is pressed, the bar display appears in red to indicate the current level setting for Brightness.
5 Red, '>' in Red Green Yellow Blue 6. The auto-search speed at no signal condition of each band is shown below: VL : 8 Sec VH : 16 Sec UHF : 32 Sec HB : 32 Sec 7. If no station signal is detected after sweeping through all the bands, auto-search will stop at the start of the next band.
6 Press Red button to activate English menu. OSD is in English. Press Green, Yellow or Blue to activate German, French or Spanish Menu respectively When the TV is turned on at the very first time, the Menu language selection is English.
7 VOLUME CONTROL 1. 2. The Volume -/+ keys is used to make the required change to the volume level. It can be activated both in TV/menu and Teletext mode. However, in menu mode no bar display will appear in picture, Installation and Language menu. These keys can also be activated in TELETEXT mode, but there will be no OSD display.
8 CHILD LOCK 1. 2. The purpose of this key (6) is to prevent the child from watching the TV when the parents are not around by keeping the RC keypad. When this key is pressed, a OSD symbol will be displayed permanently to inform the user that it is in Child Lock mode.
9 TELETEXT FUNCTION DESCRIPTIONS The thing to remember about Teletext is that it is slow. It is the nature of the system itself, where a large amount of information is sent using a small fraction of the TV signal. If you get yourself into trouble, read the following instruction carefully.
10 Four Colour Memory. (OPTIONAL) The set is fitted with a four-page memory to speed up operation and make it more convenient to use. If you are interested in stock Market Reports or TAB betting, then the four most used pages would be set on these four colour coded buttons and be instantly available.
11 DOUBLE HEIGHT Use " " key (11) to expand character size and display half text screen. It toggles between top screen, bottom screen and normal screen. INDEX Key Press / key (6) to recall the stored list of page numbers if the TV station is sending it.
12 REMOTE CONTROL UNIT The remote control unit allows almost everything to be adjusted from the armchair. 1. STANDBY ( ) 2. STATUS 3. PPR 4. DIGITAL KEYBOARD (0~9) 5. NORMAL/MTOG ( /MTOG) 6. CHLLD LOCK/INDEX ( / ) 7. HOLD ( ) 8. CANCEL ( X ) 9. REVEAL ( ? ) 1 0.
13 INSTALLING BATTERIES 1. 2. 3. Remove the battery cover of Remote Control Unit. Insert two AAA 1. 5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.
14 6. 10. 14. 15. 16. 18. 19. 20. 21. CHILD LOCK ( / ) Use to prevent the child from watching the TV when the parents are not around by keeping the Remote Control keypad (Refer to P8 CHILD LOCK). SLEEP ( / ) This button is for those fall asleep watching TV.
15 . 8. 9. 10. 11. 12. 13. 14. 17. 19. 20. 21. CANCEL( X ) This button is used to return to TV while Teletext is searching for a page. The search continues in the background, and when the page is found it puts the page number on the upper left of the TV picture.
TROUBLE SHOOTING GUIDE Symptoms Check these things Try these adjustment No picture, no sound. Be sure power cord is plugged in. May be station trouble. Check antenna connections. Maybe in AV mode. Press POWER BUTTON Try another channel. Press AV button once.
SPECIFICATIONS: Colour System Receiver Channel Teletext Power supply CRT Power Consumption Dimension (mm) Weight Remote Control Unit Power Supply * Design and specifications are subject to change without notice.
An important point after buying a device Palsonic 3490 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 3490 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 3490 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 3490 you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 3490 will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 3490, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 3490.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 3490. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 3490 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
