Instruction/ maintenance manual of the product 3425G Palsonic
Go to page of 28
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 34CM CORDLE.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Contents Contents (continued) Channel Selection ................................................................................................... Adjusting Picture .....................................................................................
Clock/Game/Calendar Multi OSD language Hyperband 255 preset channels Automatic channel preset Full function remote control AV input terminals Digital AFT technology Four picture modes ON timer/OFF tim.
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture.
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. High voltage exists in this TV set. Do not remove the cover 5 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation.
1. :Earphone Jack 2. MENU button: To enter into menu operation. 3. AV/TV button: Video input select. 4. VOL- button: volume down adjust; menu item adjust. 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select.
Back Please do not use the front and rear input terminals at the same time 5 IMPORTANT notes on the AV input terminals !.
6 Notes: In most cases, the function of buttons are equal to the CH+/- buttons, and the function of buttons are equal to the VOL+/- buttons; but in TELETEXT operation, the , , , buttons only serve as teletext control keys.
! Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
Connect to video and audio equipment This TV set provides AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
2 1 Turning off ! Press the Power Switch on the TV set. If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the AV/TV button on the set to turn on.
Operations Select Input Signal Select input signal ! 4 3 2 1 Press AV/TV button on the TV set or AV button on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals.
3 2 1 2 4 3 2 1 5 1. Press CH+ or CH- buttons to select item. Press VOL+ or VOL- buttons to adjust item. Press MENU button four times to call Program menu page. Auto Search Press MENU button repeatedly to enter into Program menu page. Press CH+ or CH- button repeatedly to select Auto Search item.
4 3 2 1 5 Press MENU button repeatedly to enter into Program menu page. Press CH+ or CH- button repeatedly to select Channel Number item. Press VOL+ or VOL- button to set a channel number (for example, channel 99). Press CH+ or CH- button repeatedly to select Channel Skip.
3 2 1 Setting Colour System If the picture colour is abnormal, maybe the colour system setting is wrong. Then you can select a proper colour system as follows. Press MENU button repeatedly to enter into Program menu page. Press VOL+or VOL- button to select a proper colour system.
! 168 3 2 8 Press 0-9 direct channel selector. 1 Operations Channel Selection Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press -/-- button repeatedly to display "-". To select two-digit channel: Press -/-- button repeatedly to display "--".
100 Item Standard Soft Brightness Brightness 4 Contrast weaker Color paler deeper Sharpness darker lighter softer sharper Picture mode Vivid Adjusting Picture Contrast Color 80 50 50 50 50 Press MENU button, the Picture menu page displays. Sharpness Tint Press CH+ or CH- button to select item.
Use MUTE button. ! Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. The minimum volume is 0 and the maximum volume is 100. If you want to mute the sound, press button on the remote. To resume the sound, press this button again.
2 1 Clock Sleep Timer Time Off Time On 00:10 00:30 - - 2 3 1 ! 2 3 Press MENU button repeatedly to enter into Clock menu page. Press VOL+ or VOL- button to set sleep time. The sleep time switches among Off, 10, 20, 30, 40, 50 and 60 minutes. When the time is up the set auto goes to STANDBY.
3 2 1 1 2 3 Setting Time On Press MENU button repeatedly to enter into Clock menu page. Press CH- button repeatedly to select Time On item. Press VOL+ or VOL- button to set On time. After you finish setting Time On item, press the STANDBY button on the remote control.
B. Before the icon disappear, continue to press 4, 3, 2, 1 on the remote control. C. Press VOL+ or VOL- button to switch between Off and On. 2 1 Press CAL (calendar) button on the remote controller to display calendar. You can adjust month by VOL+/- buttons and year by CH+/- buttons.
Child Lock 1 2 4 3 Firstly, please refer to the Hotel mode on the previous page to enter into the Control menu page. Press CH - button to select Child Lock item and then press VOL+ or VOL- button to switch between On or Off. When the Child Lock is set to On, all programs will be shielded and the screen is black.
Teletext Operations Switch on/off/Description of TELETEXT/Button Introduction Teletext is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Switching Teletext on/off Press the TEXT button to switch on teletext.
Remote controller does not work Unevenness in colour in some parts of the screen The screen is black Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
! TV system & channel range Power Supply: Power Consumption: Dimensions(mm): Weight(kg): CRT: AC 240V, 50Hz 60W 440(W) x 330(H) x 387(D) 12 34cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S41 TELETEXT Color System: Sound output: Accessories: WST FLOF TELETEXT PAL-B/G NTSC playback 1.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-J14173.
An important point after buying a device Palsonic 3425G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 3425G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 3425G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 3425G you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 3425G will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 3425G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 3425G.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 3425G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 3425G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
