Instruction/ maintenance manual of the product 3410P Palsonic
Go to page of 19
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 34CM CORDLE.
MFT (Manual Fine Tuning)...................9 Tuning in..............................................7 Channel selection......................................11 Convenient Picture Controls...................12 Convenient Sound Controls.................
English/Chinese on-screen menu display INTRODUCTION Features Hyperband 100 preset channels Auto-search, manual search Intellectualized I C-bus control Sleep timer, Auto Power-Off & blue background display Four picture modes’ setting AUDIO/VIDEO input & output terminals Advanced picture improvement circuit 1.
NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.
Effective range of the remote control operation Antenna Connection (1) Remove the back battery cover. Installation To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial.
Front view Back View Appearance Note: Functions of MENU, TV/AV, VOL , CH are also provided to the remote controller. 4.
Remote Controller Appearance 5.
To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. . Turning the Power On/Off OPERATION TV/AV button on the set to turn on the TV. *Note: If there are no input signals to the TV when the TV set is on, a blue background will 4.
. OPERATION Tuning in First, use the AUTO SEARCH function to preset all the active channels in your local area automatically. Then, arrange the preset channels with the MANUAL SEARCH, MFT (Manual Fine Tuning) and SKIP functions so that you can tune into only desired channels.
. . OPERATION Tuning in (continued) Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO- SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.
OPERATION To skip a position number After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are selected. 1. Enter into the POS. MEMORY menu, select and highlight POSITION , then select the unwanted program number with the or button.
Tuning in (continued) OPERATION COLOR AUTO 1. Press the SYS button, the colour system will be displayed on the screen. time you press the or button, the colour 2. If the colour is abnormal, press the or button to select the proper colour system. Every system will change in the sequence below.
"-" and 0-9 to select a number (0-9). . . . OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. You can select your desired TV program by one of the following methods.
PICTURE COLOR 50 BRIGHT 50 CONT 100 SHARP 50 BB ON SELECT ADJUST sharper softer *TINT Selectable picture OPERATION Convenient Picture Controls Item To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode.
!!!!!!!..... Adjusting the volume and muting the sound OPERATION Convenient Sound Controls To adjust the sound volume Adjust the sound volume with the VOL buttons. Press the VOL button to decrease the sound. Press the VOL button to increase the sound.
1. Press the MENU button repeatedly until the LANGUAGE SLEEP:30MIN. Sleep timer and to select the language for the OSD OPERATION Other functions Making use of the Sleep timer function allows you to have the set automatically turned off after a preset time.
. CONNECTING OTHER EQUIPMENT External Equipment Connections The following describes how to use and connect the TV with other AV equipment. Refer to the owner’s manual of the equipment to be connected as well.
. . . . . . . . . . . . X~Z+2, S1-S41 430 (W) x 370 (D) x 336 (H) <60W Dimensions (mm): Weight (kg): PAL-B/G OTHERS Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-14H53-.
An important point after buying a device Palsonic 3410P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 3410P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 3410P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 3410P you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 3410P will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 3410P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 3410P.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 3410P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 3410P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
