Instruction/ maintenance manual of the product Treo 500 Palm
Go to page of 12
palm Switch 500 User Guide palm Switch 500 5 Por t 10/100 Base-TX Switch with Auto MDI/MDI-X Rev . 1.0 June, 2003.
User Guide 1. Introduction W elcome to the W orld of Mini-Networking. In the modern business society , communication and sharing information is crucial. Computer networks have proven to be one of the fastest modes of communication. Lantech palm Switch 500 is compacts and attractively designed for desktop use.
palm Switch 500 User Guide •Package Contents - palm Switch 500 (5 Por t Switch) - Rubber Feet - One DC power adapter - User’ s Guide - 5TP Auto MDI/MDI-X Switch - Rubber Feet - DC power Adapter - User’ s Guide Figure 1-2. Package Contents Compare the contents of your Palm Switch 500 with the standard checklist above.
palm Switch 500 User Guide 2. Hardware Description This section mainly describes the hardware of the Lantech palm Switch 500 The physical dimensions of the 5-Por t Switch is: 128mm(W) X 65mm(D) x 23mm(H) •Front Panel The LED indicators are located on the frond panel of the Switch.
palm Switch 500 User Guide •Rear Panel The Rear Panel of t he palm Switch 500 consists of 5x 10/1 00 N-W ay UTP switch por ts, and one DC power connector . Figure 2-2. The Rear Panel of the 5-Port Switch - RJ-45 Por ts: 5x 10/100N-W ay auto-sensing for 10Base-T or 100Base-TX connection.
palm Switch 500 User Guide 3.Network Application This section provides you a few examples of network topology in which the palm Switch 500 is used, the Switch is design to be used as a desktop or segment switch.
palm Switch 500 User Guide •Enlarge Y our Network Y ou can use Uplink por t of the Palm Switch 500 to connect with another hub or switch to interconnect each of your small switched workgroup to form a large switched network. Y ou can connect anyone switch por t to hub or switch without crossover cable by the Auto MDI/MDI-X function.
palm Switch 500 User Guide 4. T rouble Shooting The Palm Switch 500 can be easily monitored through panel indicators to assist in identifying problems. This section describes common problems you may encounter and where you can nd possible solutions.
palm Switch 500 User Guide 5.T echnical Specification This section provides the speci cations of the palm Switch 500 : •Speci cation Standards Compliance IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet ANSI/IEEE standard 802.
palm Switch 500 User Guide • Federal Communications commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of FCC rules. These limits are designed to pro reasonable protection against harmful inter ference in a residential installation.
palm Switch 500.
3F , No.8, Lane 345, Y ang-Kuang St., Nei-Hu Dis., 114, T aipei, T aiwan, R.O.C. tel: +886-2-2659-1800 fax: +886-2-2659-1801 e-mail: ser vice@mail.lantech.
An important point after buying a device Palm Treo 500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palm Treo 500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palm Treo 500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palm Treo 500 you will learn all the available features of the product, as well as information on its operation. The information that you get Palm Treo 500 will certainly help you make a decision on the purchase.
If you already are a holder of Palm Treo 500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palm Treo 500.
However, one of the most important roles played by the user manual is to help in solving problems with Palm Treo 500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palm Treo 500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
