Instruction/ maintenance manual of the product REFDOCS02420200 Packard Bell
Go to page of 15
Packard Bell S tella (iXtreme) Disassembly Manual.
1 Table of Contents Overview 2 Technician Notes 2 Disassembly Instructions 2 Reassembly Instru ctions 2 Required T ools 2 Hazardous Voltage 3 Avoid Electrostatic Discharge 3 Power Supply Unit 3 Removi.
2 Overview This document contains st ep-by-step disa ssembly instructions for the Stella (iXtreme) chassi s. The instructions are illustrated where necessary with images of the pa rt that is being removed or disassembled. Furthermore , the screws that are re moved are shown next to the image of the parts themselves.
3 Hazardous Voltage There is hazardous voltage present insi de the computer when it is conne cted to an AC supply, even when the computer’s power switch i s off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)i nstallation of optional hardwar e devices .
4 Removing the Rear Bezel To remove the rear bezel, do as follows: 1. Turn off the computer, the monitor and all peripheral device s. 2. Disconnect all power and d ata cables connected to the comp uter. 3. Face the back of the unit. 4. Locate a handhold under the chassi s.
5 Fig. 3: Removing the left side cover Removing the Right Side Cover To remove the right side cover, first remove the rear bezel (see section Removing the Rear Bezel ) and then perform the following st eps: 1. Remove the two screws that hold the right side cover.
6 Removing the Drive Bracket To remove the drive bracket containing the DVD/CD-ROM drive and the floppy disk drive, first remove the rear bezel (see section Removing the Rear Bezel ), remove the left .
7 Fig. 7: Removing the drive bracket Removing the DVD/CD-ROM Drive To remove the DVD or CD-ROM drive, first remove the rear be zel (see section Removing the Rear Bezel ), remove the left side cover (s.
8 Fig. 9: Removing the floppy disk driv e screws 3. If required, remove the screws on the right side as well. 4. Slide the floppy disk drive towards the front out of the bay.
9 3. Remove the screw on the side of the hard disk drive bra cket holding it to the drive bracket above (see Fig 6 in se ction Removing the Drive Bracket ). 4. Slide the hard disk drive bracke t backwards out of the chassis. Fig. 12: Removing the hard disk drive bracket 5.
10 Fig. 14: Removing the front USB port screws Removing the Switch/LED Assembly To remove the switch/LED assembly an d the cable, first remove the rear bezel (see section Removing the Rear Bezel ) and.
11 Fig. 16: Removing the CPU fan and heat sink 3. Lift the lever to unlock the CPU from its socket. Fig. 17: Removing the CPU 4. Take out the CPU. Be very careful not to remove any of the heat paste on the CP U surface! Removing the Pentium 4 CPU If the CPU installed is a Pentium IV, please perform this additional step: 1.
12 Fig. 19: Removing the system fan 2. Take out the system fan by removing the screws, located on the b ack of the chassis, holding the syste m fan to the chassis.
13 instructions on how to remove this com ponent). 3. Remove the screws that hold the moth erboard in place and carefull y take out the motherboard from the chassis.
14 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copy right. No part of this guide may be photocopied or reproduced in any form or by any means witho ut prio r written consent from NEC Computers Internatio nal BV.
An important point after buying a device Packard Bell REFDOCS02420200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Packard Bell REFDOCS02420200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Packard Bell REFDOCS02420200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Packard Bell REFDOCS02420200 you will learn all the available features of the product, as well as information on its operation. The information that you get Packard Bell REFDOCS02420200 will certainly help you make a decision on the purchase.
If you already are a holder of Packard Bell REFDOCS02420200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Packard Bell REFDOCS02420200.
However, one of the most important roles played by the user manual is to help in solving problems with Packard Bell REFDOCS02420200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Packard Bell REFDOCS02420200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
