Instruction/ maintenance manual of the product PTV3606 Pacific Digital
Go to page of 66
SER VICE MANUAL Design and specifications are subject to change without notice. COLOR TELEVISION RECEIVER PTV3606 ORIGINAL MFR’S VERSION A.
SER VICE MANUAL Design and specifications are subject to change without notice. COLOR TELEVISION RECEIVER PTV3606 ORIGINAL MFR’S VERSION A.
6. AVOID AN X-RAY 1. KEEP THE NOTICES 5. TAKE CARE TO DEAL WITH THE CATHODE-RAY TUBE In the condition that an explosion-proof cathode- ray tube is set in this equipment, safety is secured against implosion. However, when removing it or serving from backward, it is dangerous to give a shock.
A1-1 A1-1 A1-1 A2-1 A3-1~A3-4 B1-1 B2-1, B2-2 C-1 C-1 C-2 D-1~D-5 E-1, E-2 F-1~F-4 G-1, G-2 G-3, G-4 G-5, G-6 G-7, G-8 G-9, G-10 H-1~H-3 I-1 J1-1 J2-1, J2-2 CONTENTS A2-1 SERVICING NOTICES ON CHECKING ..................................................
GENERAL SPECIFICATIONS G-1 T V CRT CRT Size / Visual Size 14 inch / 335.4mmV System CRT Type Normal Deflection 90 degree Magnetic Field BV/BH +0.45G/0.18G Color System PAL Speaker 1Speaker Position Bottom Size 3 Inch Impedance 8 ohm Sound Output MAX 1.
GENERAL SPECIFICATIONS Nicam ST No Tone 1/2 No Pin Code No AV Yes Skip Yes Channel Yes Hotel Lock No Sleep Timer Yes Sound Mute Yes G - 8 OSD Language English French Spanish German Italian G - 9 Clock.
GENERAL SPECIFICATIONS VM Circuit No Full OSD No Unitext Yes Fastext No Top Text No Premiere No Comb Filter No Lines Auto CH Memory Yes Auto Set Up No Stable Sound No FBT Leak Test Protect No Hotel Lo.
GENERAL SPECIFICATIONS Content ---- Sets Material -- /-- Dimensions W x D x H(mm) -- x -- x -- Description of Origin No Gift Box Yes Material Double/Full Color Dimensions W x D x H(mm) 440 x 408 x 380.
1. REMOVAL OF ANODE CAP Read the following NOTED items before starting work. After turning the power off there might still be a potential voltage that is very dangerous. When removing the Anode Cap, make sure to discharge the Anode Cap's potential voltage.
B2-1 Masking Tape (Cotton Tape) D ISASSEMBL Y INSTRUCTIONS 2. REMOVAL IC Put the Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage.
B2-2 DISASSEMBL Y INSTR UCTIONS Supply soldering from upper position to lower position IC Supply the solder from the upper position of IC leads sliding to the lower position of the IC leads. (Refer to Fig. 2-6.) 2. Fig. 2-6 Soldering Iron Solder IC Absorb the solder left on the lead using the Braided Shield Wire.
SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter the Service Mode, press both set key and remote control key for more than 2 seconds. Set Key Remocon Key Operations VOL. (-) MIN 0 Reset the user setting items (PICTURE, VOLUME and LANGUAGE) to the initial state for delivery.
If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1.
2-1: AGC VOLTAGE 1. 2. 3. 4. 5. Place the set with Aging Test for more than 15 minutes. Receive the UHF (63 ± 1dB). Connect the digital voltmeter between the TP002 and the (GND) of TU001 . Activate the adjustment mode display of Fig. 1-1 and press the channel button (01) on the remote control to select "RF AGC".
Receive the monoscope pattern. Using the remote control, set the brightness and contrast to normal position. Activate the adjustment mode display of Fig. 1-1 and press the channel button (08) on the remote control to select "H POSI(50)". Press the VOL.
ELECTRICAL ADJUSTMENTS D-3 2-14 : Confirmation of Fixed Value (Step No.) Please check if the fixed values of the each adjustment items are set correctly referring below.
ELECTRICAL ADJUSTMENTS 3. 1. 2. 3. 1. 2. 3. 4. 5. 6. 7. 8. 3-2: PURITY NOTE Adjust after performing adjustments in section 3-1. 1. 2. 3. 4. 5. Receive the green raster pattern from color bar generator. Adjust the pair of purity magnets to center the color on the screen.
D-5 ELECTRICAL ADJUSTMENTS 4. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) MAIN PCB CRT PCB FB401 J701 TP002 TP003 CP101 TU001 CRT CP401 VR501 SPEAKER CP1001 VR401 VR420 W812 TP023 R.
E-1 E-2 BLOCK DIAGRAM CF202 SAW FILTER CHROMA IC IC201 STV2246C SP1001 SPEAKER 2 3 1 J1001 HEADPHONE_JACK 5 4 1 48 49 VOL UP CH UP VOL DOWN CH DOWN IC1001 AN7511 SOUND AMP IC 2 5 8 6 4 OS101 1 56 17 OSD_R 16 OSD_G 15 OSD_B 20 SCL MICON W/T.
CP101 TU001 OS101 J1001 F501 L501 S501B S501A FH501 FH502 C527 Q402 T401 L401 C423 R447 C437 CP401 R429 R427 C446 C440 R446 D410 D405 C404 HS401 D414 CP803A R421 D101 SW101 SW102 SW103 SW104 C501_2 C4.
R101 R104 R103 R102 C1009 C007_1 C001 R007 R625 C213_1 Q605 R219 R623 R643 R640 R602 R606 C201 C205 R639 R636 R645 R638 R607 C620 C619 C618 R208 R203 R204 C614_1 R618 Q204 Q202 C215 C221 R608 C615 C61.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 :SINCE THESE PARTS MARKED BY CAUTION DESCRIBED IN PARTS LIST ONLY CRITICAL FOR SAFETY,USE ONES ARE DANS LA NOMENCLATURE DES PIECES N’UTILISER QUE CELLS DECRITES DANGEREUSES AN POINT DE VUE SECURITE :LES PIECES REPAREES PAR UN ETANT ATTENTION R124 10K R120 4.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 Q201 KTC3881S-RTK VIF PRE.AMP Q204 2SC2412K SIF BUFFER Q605 2SC2412K BUFFER Q202 2SC2412K BUFFER L203 1.5uH L206 0.27uH L204 18uH L703 10uH L702 10uH L103 10uH OUT OUT G IN IN CF202_1 J1951M SAW FILTER 12345 CF201 TPSRA6M00B00-A0 Q615 KRC102SRTK ACL CANCEL CF204 MKT41.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 SPEAKER SP1001 SA08A05BWC CP1001 TID-X02P-B2 1 2 :SINCE THESE PARTS MARKED BY CAUTION DESCRIBED IN PARTS LIST ONLY CRITICAL FOR SAFETY,USE O.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 HS401 763WSAA013 HS402 763WSA0017 R418_2 6.8 3W R411_2 150 2W R807 15K 1W R805 15K 1W R803 15K 1W R424 180 1W R447 68 1/2W R429 5.6 1W B G R 11 6 8 10 9 1 7 5 V801 A34JXV70X53N45 Q401 TT2140LS-YBC11 H.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 IC502 KIA7806API REG.6V IC 123 IC504 LTV-817M-VB FEED BACK 1 2 34 F501 50T040H T4A_L_250V FH501 EYF-52BC FH502 EYF-52BC 21 L503 8R140018 DEGAUSS COIL L501 0R7A223F24Y COIL LINE FILTER 1 2 3 4 T501 8129110H 1 10 11 12 13 14 15 16 17 18 2 3 5 6 7 8 IC503 KIA78R09API REG.
WAVEFORMS MICON/TUNER 1 CHROMA/SIF/VIF/21PIN 2 3 4 5 10 9 8 7 6 11 The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. NOTE: 0.5 µ s 1.00V 10ms 1.00V 20 µ s 1.00V 20 µ s 1.00V 50 µ s 100mV 0.
WAVEFORMS The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. NOTE: 17 19 20 20 µ s 1.00V 20 µ s 1.00V 20 µ s 1.00V 23 24 20 µ s 200mV 10ms 1.00V DEFLECTION/CRT 33 35 10ms 1.00V 10ms 10.
WAVEFORMS The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. NOTE: 40 20 µ s 50V 41 20 µ s 50V H-3.
MECHANICAL EXPLODED VIEW I-1 102 106 206 206 206 206 201 206 207 108 207 V801 207 207 L503 J801 PCB110 (CRT PCB ASS'Y) 204 TU001 204 203 107 103 104 105 205 FB401 110 110 109 PCB010 (MAIN PCB ASS.
MECHANICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION 101 A3M421I720 CABINET,FRONT ASSY 101A 701WPJC340 CABINET,FRONT 101B 713WPAA048 GUIDE,REMOCON 101C 713WPAA111 GLASS LED 101D 735WPA0396 SPEAKER,HOLDER 101E 735WPBA808 BUTTON,FRAME 101F 8995034000 CORD CLIP UL CO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION RESISTORS ICS ! R411 R3X28A151J R.METAL OXIDE 150 OHM 2W IC101 I5PD0F009A IC OECF009A ! R418 R3X28B6R8J R,METAL OXIDE 6.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION MISCELLANEOUS CF201 1012T6R014 FILTER,CERAMIC TRAP TPSRA6M00B00-A0 CF202 102E239R5B FILTER SAW J1951M CF204 1012T04101 FILTER,CERAMIC TRAP MKT41.
M3M4-21I U353551 SPEC.NO. O/R NO..
6. AVOID AN X-RAY 1. KEEP THE NOTICES 5. TAKE CARE TO DEAL WITH THE CATHODE-RAY TUBE In the condition that an explosion-proof cathode- ray tube is set in this equipment, safety is secured against implosion. However, when removing it or serving from backward, it is dangerous to give a shock.
A1-1 A1-1 A1-1 A2-1 A3-1~A3-4 B1-1 B2-1, B2-2 C-1 C-1 C-2 D-1~D-5 E-1, E-2 F-1~F-4 G-1, G-2 G-3, G-4 G-5, G-6 G-7, G-8 G-9, G-10 H-1~H-3 I-1 J1-1 J2-1, J2-2 CONTENTS A2-1 SERVICING NOTICES ON CHECKING ..................................................
GENERAL SPECIFICATIONS G-1 T V CRT CRT Size / Visual Size 14 inch / 335.4mmV System CRT Type Normal Deflection 90 degree Magnetic Field BV/BH +0.45G/0.18G Color System PAL Speaker 1Speaker Position Bottom Size 3 Inch Impedance 8 ohm Sound Output MAX 1.
GENERAL SPECIFICATIONS Nicam ST No Tone 1/2 No Pin Code No AV Yes Skip Yes Channel Yes Hotel Lock No Sleep Timer Yes Sound Mute Yes G - 8 OSD Language English French Spanish German Italian G - 9 Clock.
GENERAL SPECIFICATIONS VM Circuit No Full OSD No Unitext Yes Fastext No Top Text No Premiere No Comb Filter No Lines Auto CH Memory Yes Auto Set Up No Stable Sound No FBT Leak Test Protect No Hotel Lo.
GENERAL SPECIFICATIONS Content ---- Sets Material -- /-- Dimensions W x D x H(mm) -- x -- x -- Description of Origin No Gift Box Yes Material Double/Full Color Dimensions W x D x H(mm) 440 x 408 x 380.
1. REMOVAL OF ANODE CAP Read the following NOTED items before starting work. After turning the power off there might still be a potential voltage that is very dangerous. When removing the Anode Cap, make sure to discharge the Anode Cap's potential voltage.
B2-1 Masking Tape (Cotton Tape) D ISASSEMBL Y INSTRUCTIONS 2. REMOVAL IC Put the Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage.
B2-2 DISASSEMBL Y INSTR UCTIONS Supply soldering from upper position to lower position IC Supply the solder from the upper position of IC leads sliding to the lower position of the IC leads. (Refer to Fig. 2-6.) 2. Fig. 2-6 Soldering Iron Solder IC Absorb the solder left on the lead using the Braided Shield Wire.
SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter the Service Mode, press both set key and remote control key for more than 2 seconds. Set Key Remocon Key Operations VOL. (-) MIN 0 Reset the user setting items (PICTURE, VOLUME and LANGUAGE) to the initial state for delivery.
If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1.
2-1: AGC VOLTAGE 1. 2. 3. 4. 5. Place the set with Aging Test for more than 15 minutes. Receive the UHF (63 ± 1dB). Connect the digital voltmeter between the TP002 and the (GND) of TU001 . Activate the adjustment mode display of Fig. 1-1 and press the channel button (01) on the remote control to select "RF AGC".
Receive the monoscope pattern. Using the remote control, set the brightness and contrast to normal position. Activate the adjustment mode display of Fig. 1-1 and press the channel button (08) on the remote control to select "H POSI(50)". Press the VOL.
ELECTRICAL ADJUSTMENTS D-3 2-14 : Confirmation of Fixed Value (Step No.) Please check if the fixed values of the each adjustment items are set correctly referring below.
ELECTRICAL ADJUSTMENTS 3. 1. 2. 3. 1. 2. 3. 4. 5. 6. 7. 8. 3-2: PURITY NOTE Adjust after performing adjustments in section 3-1. 1. 2. 3. 4. 5. Receive the green raster pattern from color bar generator. Adjust the pair of purity magnets to center the color on the screen.
D-5 ELECTRICAL ADJUSTMENTS 4. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) MAIN PCB CRT PCB FB401 J701 TP002 TP003 CP101 TU001 CRT CP401 VR501 SPEAKER CP1001 VR401 VR420 W812 TP023 R.
E-1 E-2 BLOCK DIAGRAM CF202 SAW FILTER CHROMA IC IC201 STV2246C SP1001 SPEAKER 2 3 1 J1001 HEADPHONE_JACK 5 4 1 48 49 VOL UP CH UP VOL DOWN CH DOWN IC1001 AN7511 SOUND AMP IC 2 5 8 6 4 OS101 1 56 17 OSD_R 16 OSD_G 15 OSD_B 20 SCL MICON W/T.
CP101 TU001 OS101 J1001 F501 L501 S501B S501A FH501 FH502 C527 Q402 T401 L401 C423 R447 C437 CP401 R429 R427 C446 C440 R446 D410 D405 C404 HS401 D414 CP803A R421 D101 SW101 SW102 SW103 SW104 C501_2 C4.
R101 R104 R103 R102 C1009 C007_1 C001 R007 R625 C213_1 Q605 R219 R623 R643 R640 R602 R606 C201 C205 R639 R636 R645 R638 R607 C620 C619 C618 R208 R203 R204 C614_1 R618 Q204 Q202 C215 C221 R608 C615 C61.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 :SINCE THESE PARTS MARKED BY CAUTION DESCRIBED IN PARTS LIST ONLY CRITICAL FOR SAFETY,USE ONES ARE DANS LA NOMENCLATURE DES PIECES N’UTILISER QUE CELLS DECRITES DANGEREUSES AN POINT DE VUE SECURITE :LES PIECES REPAREES PAR UN ETANT ATTENTION R124 10K R120 4.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 Q201 KTC3881S-RTK VIF PRE.AMP Q204 2SC2412K SIF BUFFER Q605 2SC2412K BUFFER Q202 2SC2412K BUFFER L203 1.5uH L206 0.27uH L204 18uH L703 10uH L702 10uH L103 10uH OUT OUT G IN IN CF202_1 J1951M SAW FILTER 12345 CF201 TPSRA6M00B00-A0 Q615 KRC102SRTK ACL CANCEL CF204 MKT41.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 SPEAKER SP1001 SA08A05BWC CP1001 TID-X02P-B2 1 2 :SINCE THESE PARTS MARKED BY CAUTION DESCRIBED IN PARTS LIST ONLY CRITICAL FOR SAFETY,USE O.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 HS401 763WSAA013 HS402 763WSA0017 R418_2 6.8 3W R411_2 150 2W R807 15K 1W R805 15K 1W R803 15K 1W R424 180 1W R447 68 1/2W R429 5.6 1W B G R 11 6 8 10 9 1 7 5 V801 A34JXV70X53N45 Q401 TT2140LS-YBC11 H.
ABC D E F G H ABC D E F G H 2 1 3 4 5 6 7 8 2 1 3 4 5 6 7 8 IC502 KIA7806API REG.6V IC 123 IC504 LTV-817M-VB FEED BACK 1 2 34 F501 50T040H T4A_L_250V FH501 EYF-52BC FH502 EYF-52BC 21 L503 8R140018 DEGAUSS COIL L501 0R7A223F24Y COIL LINE FILTER 1 2 3 4 T501 8129110H 1 10 11 12 13 14 15 16 17 18 2 3 5 6 7 8 IC503 KIA78R09API REG.
WAVEFORMS MICON/TUNER 1 CHROMA/SIF/VIF/21PIN 2 3 4 5 10 9 8 7 6 11 The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. NOTE: 0.5 µ s 1.00V 10ms 1.00V 20 µ s 1.00V 20 µ s 1.00V 50 µ s 100mV 0.
WAVEFORMS The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. NOTE: 17 19 20 20 µ s 1.00V 20 µ s 1.00V 20 µ s 1.00V 23 24 20 µ s 200mV 10ms 1.00V DEFLECTION/CRT 33 35 10ms 1.00V 10ms 10.
WAVEFORMS The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. NOTE: 40 20 µ s 50V 41 20 µ s 50V H-3.
MECHANICAL EXPLODED VIEW I-1 102 106 206 206 206 206 201 206 207 108 207 V801 207 207 L503 J801 PCB110 (CRT PCB ASS'Y) 204 TU001 204 203 107 103 104 105 205 FB401 110 110 109 PCB010 (MAIN PCB ASS.
MECHANICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION 101 A3M421I720 CABINET,FRONT ASSY 101A 701WPJC340 CABINET,FRONT 101B 713WPAA048 GUIDE,REMOCON 101C 713WPAA111 GLASS LED 101D 735WPA0396 SPEAKER,HOLDER 101E 735WPBA808 BUTTON,FRAME 101F 8995034000 CORD CLIP UL CO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION RESISTORS ICS ! R411 R3X28A151J R.METAL OXIDE 150 OHM 2W IC101 I5PD0F009A IC OECF009A ! R418 R3X28B6R8J R,METAL OXIDE 6.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION MISCELLANEOUS CF201 1012T6R014 FILTER,CERAMIC TRAP TPSRA6M00B00-A0 CF202 102E239R5B FILTER SAW J1951M CF204 1012T04101 FILTER,CERAMIC TRAP MKT41.
M3M4-21I U353551 SPEC.NO. O/R NO..
An important point after buying a device Pacific Digital PTV3606 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pacific Digital PTV3606 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pacific Digital PTV3606 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pacific Digital PTV3606 you will learn all the available features of the product, as well as information on its operation. The information that you get Pacific Digital PTV3606 will certainly help you make a decision on the purchase.
If you already are a holder of Pacific Digital PTV3606, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pacific Digital PTV3606.
However, one of the most important roles played by the user manual is to help in solving problems with Pacific Digital PTV3606. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pacific Digital PTV3606 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
