Instruction/ maintenance manual of the product SWI-X PAC
Go to page of 8
1 06-14-07 SWI-X Universal Steering Wheel Control Interface Installation Instructions Before Y ou Start A. Is this product compatible with the vehicle? • See application guide (seperate sheet) for listing of vehicles and connection information. If not, check www .
2 Wiring Connections Step 1. Connect the BLACK wire to ground (-). 9 HUL¿FDWLRQ Wire or location registers a constant (-) when probed. Step 2. Connect the RED wire to switched +12V . 9 HUL¿FDWLRQ Wire reg- isters +12V when the ignition key is turned to the ACC or ON posi- tions.
3 06-14-07 37)8 Step 8. T o turn IR Extended Mode ON: Press and release the program- ming button within 3 seconds . T o leave IR Extended Mode OFF: Do nothing for 3 seconds. Note: T o change IR Extended Mode later , restart procedure at Step 6. Steps 1 1-24 (learning radio commands) must also be repeated.
4 Step 18. Press and hold program- ming/mode button on SWI-X. Left LED will light. Step 19. Release programming/ mode button. 37)8 37)8 37)8 Y ou only need to press the programming/mode button once to program all the buttons. If you press this button again after the interface is programmed, it will erase all previous learned buttons.
5 06-14-07 37)8 37)8 Programming the SWI-X to Control the Head Unit (cont.) Step 21. Release the button. The right LED will turn on. Step 22. Hold the IR emitter on the head unit’s remote control within 3 to 4 inches of the IR Input on the SWI- X.
6 T esting the SWI-X Final Installation Hold the SWI-X infrared emitter (clear blue light at the end of the four-foot wire) close to the head unit and test each function of the steering wheel controls.
7 06-14-07 Appendix A: Known Incompatible V ehicles Appendix B: Known Incompatible Aftermarket Head Units Appendix C: Head Units That Require IR Extended Mode On 9HKLFOH Make(s) Year(s) Model(s) %0: A.
8 T roubleshooting Guide Working on a new or unlisted vehicle? We are always looking for new vehicle information. If you’ve successfully completed the installation on a vehicle with steering wheel controls, and the vehicle is not listed in these instructions or on our Website, contact us at techsupport@pac-audio.
An important point after buying a device PAC SWI-X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PAC SWI-X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PAC SWI-X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PAC SWI-X you will learn all the available features of the product, as well as information on its operation. The information that you get PAC SWI-X will certainly help you make a decision on the purchase.
If you already are a holder of PAC SWI-X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PAC SWI-X.
However, one of the most important roles played by the user manual is to help in solving problems with PAC SWI-X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PAC SWI-X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
