Instruction/ maintenance manual of the product 68018 OxiBrands
Go to page of 18
1/4” 18-GAUGE CROWN AIR ST APLER Model 68018 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could result in DEA TH or SERIOUS INJUR Y . SA VE THIS MANUAL.
Page 2 For technical questions, please call 1-800-444-3353. SKU 68018 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU 68018 W ARNING – When using tools, basic precautions should always be followed, including the following: General a. T o reduce the risks of electric shock, re, and injury to persons, read all the instructions before using the tool.
Page 4 For technical questions, please call 1-800-444-3353. SKU 68018 Never carry the tool with nger on trigger , the tool is able to re a fastener . T ool use and care a. Use clamps or another practical way to secure and support the workpiece to a stable platform.
Page 5 For technical questions, please call 1-800-444-3353. SKU 68018 SA VE THESE INSTRUCTIONS. SAFETY INSTRUCTIONS 1. Operators and others in work area MUST wear ANSI-approved safety goggles with side shields during use. The employer is responsible to enforce the use of eye protection by the operator and others in the work area.
Page 6 For technical questions, please call 1-800-444-3353. SKU 68018 23. Install in-line shutoff valve to allow immediate control over air supply in an emergency , even if a hose is ruptured. 24. Do not engrave or stamp anything into the housing to avoid weakening it.
Page 7 For technical questions, please call 1-800-444-3353. SKU 68018 FUNCTIONAL DESCRIPTION Specications Maximum Air Pressure 120 PSI Air Inlet 1/4”-18 NPT Fastener T ype 5/8” to 1-5/8”, 18 .
Page 8 For technical questions, please call 1-800-444-3353. SKU 68018 Description Function A Air Hose Connects air to tool B Filter Prevents dirt and condensation from damaging tool or work piece C Re.
Page 9 For technical questions, please call 1-800-444-3353. SKU 68018 Air T ool & Spray Gun Stationary Setup Description Function A Vibration Pads For noise and vibration reduction B Anchor Bolts .
Page 10 For technical questions, please call 1-800-444-3353. SKU 68018 tool. Other components, such as coupler plug and industrial-grade quick coupler , will make operation more efcient, but are not required. W ARNING! TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Do not install a quick coupler on the tool.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 68018 parts. If any problems are found, do not use tool until repaired. T esting the Single Sequential Safety T rip Mechanism Even though the Stapler should be empty during this procedure, A LWAY S point the Stapler at a piece of scrap wood when testing.
Page 12 For technical questions, please call 1-800-444-3353. SKU 68018 4. T o re, open the shut-off valve, place the Safety against the workpiece. The Stapler should not re if the nose is not depressed. Once depressed, gently and briey squeeze the T rigger once.
Page 13 For technical questions, please call 1-800-444-3353. SKU 68018 USER-MAINTENANCE Procedures not specically explained in this manual must be performed only by a qualied technician.
Page 14 For technical questions, please call 1-800-444-3353. SKU 68018 3. Hold the Stapler pointed away from you and any other people or fragile objects and lift up the Cover Latch (43). 4. Pull up on the Switch, lifting the Cover Plate (44) up off the Drive Guide (41) and remove jammed fasteners.
Page 15 For technical questions, please call 1-800-444-3353. SKU 68018 T roubleshooting Problem Possible Causes Likely Solutions Insufcient fastener depth. 1. Not enough air pressure. 2. Incorrect lubrication or not enough lubrication. 3. Blocked air inlet screen (if equipped).
Page 16 For technical questions, please call 1-800-444-3353. SKU 68018 Part Description Qty 1 Screw 1 2 Air Deector Spring 1 3 Air Deector 1 4 Hex Bolt (M5x20) 6 5 Spring Gasket 6 6 Cylinder Cap 1 7 Sealing Gasket 1 8 Head V alve Spring 1 9 O-Ring (13.
Page 17 For technical questions, please call 1-800-444-3353. SKU 68018 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
Page 18 For technical questions, please call 1-800-444-3353. SKU 68018 Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durability standards, and warrant.
An important point after buying a device OxiBrands 68018 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought OxiBrands 68018 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data OxiBrands 68018 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, OxiBrands 68018 you will learn all the available features of the product, as well as information on its operation. The information that you get OxiBrands 68018 will certainly help you make a decision on the purchase.
If you already are a holder of OxiBrands 68018, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime OxiBrands 68018.
However, one of the most important roles played by the user manual is to help in solving problems with OxiBrands 68018. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device OxiBrands 68018 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
