Instruction/ maintenance manual of the product FLEXware16 Amp Maximum 250VAC Outback Power Systems
Go to page of 4
FLEX ware16 Amp Maximum 30VDC/250V A C Rated Relay and DIN Mount Base with LED The FLEXware Rela y Assembly will activate a two -wire start generator when wired to the A UX output of either an OutBack FX Inverter/Charger or an OutBack Charge Contr oller .
WIRING INSTRUC TIONS Wire the r elay coil from the A UX positive and negative connections of your OutBack product according to the diag ram. The coil connections (A1 and A2) are not polarity sensitive and the LED will light in either polarity as long as proper voltage is present.
There are two scr ew terminals for each relay contact. Each can handle up to 8 amps. They ar e tied together internally . COM 11 and C OM 21 are the common relay connections. Either can be used for loads under 8 amps . I f the load exceeds 8 amps, use both C OM 11 and COM 21.
European Sales Oce C/ Castelló , 17 08830 - Sant Boi de Llobregat BARCEL ONA, España Phone: +34.93.654.9568 Corporate Oce 19009 62nd Av enue NE Arlington, W A USA (+1) 360-435-6030 900-0018-01-00 REV A www.
An important point after buying a device Outback Power Systems FLEXware16 Amp Maximum 250VAC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Outback Power Systems FLEXware16 Amp Maximum 250VAC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Outback Power Systems FLEXware16 Amp Maximum 250VAC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Outback Power Systems FLEXware16 Amp Maximum 250VAC you will learn all the available features of the product, as well as information on its operation. The information that you get Outback Power Systems FLEXware16 Amp Maximum 250VAC will certainly help you make a decision on the purchase.
If you already are a holder of Outback Power Systems FLEXware16 Amp Maximum 250VAC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Outback Power Systems FLEXware16 Amp Maximum 250VAC.
However, one of the most important roles played by the user manual is to help in solving problems with Outback Power Systems FLEXware16 Amp Maximum 250VAC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Outback Power Systems FLEXware16 Amp Maximum 250VAC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
