Instruction/ maintenance manual of the product MAXIMUS V EXTREME Asus
Go to page of 246
Motherboard MAXIMUS V EXTREME.
ii E7627 Revised Edition August 2012 Copyright © 2012 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, trans.
iii Contents Safety information ..................................................................................................... vii About this guide ................................................................................................
iv 2.3 Motherboard rear and audio connections ............................................. 2-20 2.3.1 Rear I/O connection .................................................................. 2-20 2.3.2 Audio I/O connections ............................
v Chapter 4: Software support 4-1 4.1 Installing an operating system ................................................................. 4-1 4.2 Support DVD information .......................................................................... 4-1 4.2.1 Running the support DVD .
vi 6.1.2 Before you begin ......................................................................... 6-1 6.1.3 Installing two CrossFireX™ graphics cards ................................ 6-2 6.1.4 Installing three CrossFireX™ graphics cards ........
vii Safety information Electrical safety T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
ix Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task.
x MAXIMUS V EXTREME specications summary (continued on the next page) CPU LGA1 155 socket for Intel ® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium ® / Celeron ® Processors Supports 22/32nm CPU Supports Intel ® T urbo Boost T echnology 2.
xi MAXIMUS V EXTREME specications summary (continued on the next page) Storage Intel ® Z77 Express Chipset with RAID 0, 1, 5, 10 support - 2 x SA T A 6.0 Gb/s ports [red] - 3 x SA T A 3.0 Gb/s ports [black]; 1 port at mid-board reserved for eSA T A*** - 1 x mSA T A 3.
xii MAXIMUS V EXTREME specications summary (continued on the next page) ROG Exclusive Features ROG OC Key - OSD T weakIt - OSD Monitor mPCIe Combo™ (mPCIe/mSA T A combo card) ROG Connect - RC Dia.
xiii MAXIMUS V EXTREME specications summary (continued on the next page) Special Features ASUS Q-Design - ASUS Q-Code - ASUS Q-Shield - ASUS Q-Connector - ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED) - ASUS Q-Slot - ASUS Q-DIMM Back I/O Ports 1 x Thunderbolt port 1 x Clear CMOS button 1 x ROG Connect On/Off button 4 x USB 2.
xiv MAXIMUS V EXTREME specications summary Internal Connectors 1 x mPCIe Combo™ header 15 x ProbeIt measurement points 7 x ProbeIt cable connectors 1 x 24-pin EA TX power connector 1 x 8-pin EA TX 12V power connector 1 x 4-pin EA TX 12V power connector Manageability WfM2.
xv Package contents Check your motherboard package for the following items. Motherboard ROG MAXIMUS V EXTREME Cables 1 x ROG Connect cable 3 x 2-in-1 SA T A 6.
xvi Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 1 155 CPU Intel LGA 1 155 compatible CPU Fan DDR3 DIMM SA T A hard disk drive SA T A optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
ASUS MAXIMUS V EXTREME 1-1 Chapter 1 Product introduction 1 1.1 Special features 1.1.1 Product highlights Republic of Gamers The Republic of Gamers offers you the best of the best. W e offer the best hardware engineering, the fastest performance, the most innovative ideas, and we welcome the best gamers to join in.
1-2 Chapter 1: Product introduction Chapter 1 LucidLogix ® Virtu ™ MVP LucidLogix ® Virtu™ MVP , with HyperFormance™ T echnology , is designed for Intel ® processor graphics chip on Windows ® 7 and perfectly combines the performance of a discrete graphics card with fast computing iGPU (Integrated Graphics Processing Unit).
ASUS MAXIMUS V EXTREME 1-3 Chapter 1 USB BIOS FlashBack USB BIOS Flashback offers a hassle-free updating solution for your ultimate convenience. Simply install a USB storage device containing the BIOS.
1-4 Chapter 1: Product introduction Chapter 1 Subzero Sense Subzero Sense allows you to read the system’s temperature even in its coldest state. OC Key - OSD T weakIt OSD T weakIt allows you to tweak the parameters of your system in real-time using a convenient graphical overlay displayed on your screen.
ASUS MAXIMUS V EXTREME 1-5 Chapter 1 DAEMON T ools Pro Standard DAEMON T ools Pro offers essential functionality to backup CD, DVD and Blu-ray discs. It converts optical media into virtual discs and emulates devices to work with the virtual copies. DAEMON T ools Pro organizes data, music, video, and photo collections on a PC, notebook, or netbook.
1-6 Chapter 1: Product introduction Chapter 1 1.2 Motherboard overview 1.2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
ASUS MAXIMUS V EXTREME 1-7 Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors.
1-8 Chapter 1: Product introduction Chapter 1 Layout contents Connectors/Jumpers/Buttons and switches/Slots Page 1. Power connectors (24-pin EA TXPWR, 8-pin EA TX12V , 4-pin EA TX12V) 1-48 2. LGA1 155 CPU Socket 1-9 3. CPU, chassis, and optional fan connectors (4-pin CPU_F AN, 4-pin CPU_OPT , 4-pin OPT_F AN1-3, 4-pin CHA_FAN1-3) 1-46 4.
ASUS MAXIMUS V EXTREME 1-9 Chapter 1 1.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1 155 socket designed for the Intel ® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium™, and Celeron™ processors.
1-10 Chapter 1: Product introduction Chapter 1 Recommended memory congurations 1.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module.
ASUS MAXIMUS V EXTREME 1-1 1 Chapter 1 Memory congurations Y ou may install 1GB, 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets. • Memory module with memory frequency higher than 2133 MHz and its corresponding timing or the loaded XMP prole is not the JEDEC memory standard.
1-12 Chapter 1: Product introduction Chapter 1 MAXIMUS V EXTREME Motherboard Qualied V endors Lists (QVL) DDR3 2800 MHz capability DDR3 2666 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 2 4 G.
ASUS MAXIMUS V EXTREME 1-13 Chapter 1 DDR3 2200 MHz capability DDR3 2133 MHz capability DDR3 2400 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 Transcend TX2400KLU-4GK (381850)(XMP) 2GB DS - - - 1.
1-14 Chapter 1: Product introduction Chapter 1 DDR3 2000 MHz capability DDR3 2133 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 CORSAIR CMT4GX3M2B2133 C9(XMP) 4GB (2x2GB) DS - - 9-10- 9-27 1.
ASUS MAXIMUS V EXTREME 1-15 Chapter 1 DDR3 2000 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 CORSAIR CMZ4GX3M2A2000 C10(Ver 5.12)(XMP) 4GB (2x2GB) SS - - 10-10- 10-27 1.5 • • G.
1-16 Chapter 1: Product introduction Chapter 1 DDR3 1866 MHz capability DDR3 1800 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 G.SKILL F3-14400CL9D-4GBRL(XMP) 4GB (2x2GB) DS - - 9-9-9-24 1.
ASUS MAXIMUS V EXTREME 1-17 Chapter 1 DDR3 1600 MHz capability (continued on the next page) V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 A-DA .
1-18 Chapter 1: Product introduction Chapter 1 (continued on the next page) DDR3 1600 MHZ Capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing Vo ltage DIMM socket support (Optional) 1 2 4 Crucial BL T4G3D1608DT1TX 0.16FM(XMP) 4GB DS - - 8-8-8-24 1.
ASUS MAXIMUS V EXTREME 1-19 Chapter 1 DDR3 1600 MHz capability (continued on the next page) V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 Kingston KHX1600C9D3K4/ 16GX(XMP) 16GB (4x4GB) DS - - 9-9-9-24 1.
1-20 Chapter 1: Product introduction Chapter 1 DDR3 1600 MHz capability DDR 1333 MHz capability (continued on the next page) V endors Part No. Size SS/ DS Chip Brand Chip NO.
ASUS MAXIMUS V EXTREME 1-21 Chapter 1 DDR 1333 MHz capability (continued on the next page) V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 Asint .
1-22 Chapter 1: Product introduction Chapter 1 (continued on the next page) DDR 1333 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2.
ASUS MAXIMUS V EXTREME 1-23 Chapter 1 DDR 1333 MHz capability (continued on the next page) V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 2 4 OCZ OCZ3G1333L V4GK 4GB (2x2GB) DS - - 9-9-9 1.65 • • OCZ OCZ3G1333L V8GK 8GB (2x4GB) DS - - 9-9-9 1.
1-24 Chapter 1: Product introduction Chapter 1 DDR 1333 MHz capability Side(s): SS - Single-sided DS - Double-sided DIMM support: (1) Supports one (1) module inserted into any slot as Single-channel memory conguration. We suggest that you install the module into A2 slot.
ASUS MAXIMUS V EXTREME 1-25 Chapter 1 1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 3.0/2.0 x16/x8_1 slot 2 PCIe 3.
1-26 Chapter 1: Product introduction Chapter 1 • We recommend that you provide sufcient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_F AN1-3 when using multiple graphics cards for better thermal environment.
ASUS MAXIMUS V EXTREME 1-27 Chapter 1 IRQ assignments for this motherboard A B C D E F G H PCIE_x16/x8_1 shared – – – – – – – PCIE_x8_2B – shared – – – – – – PCIE_x4_1 shared – – – – – – – I.
1-28 Chapter 1: Product introduction Chapter 1 1.2.6 Onboard buttons and switches Onboard switches and buttons allow you to ne-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
ASUS MAXIMUS V EXTREME 1-29 Chapter 1 3. GO button Press the GO button before POST to enable MemOK! or press it to quickly load the preset prole (GO_Button le) for temporary overclocking when in OS. 4. BIOS Switch button The motherboard comes with two BIOS.
1-30 Chapter 1: Product introduction Chapter 1 Ensure to set the LN2 Mode jumper to [Enable] before using the Slow Mode Switch. 5. Slow Mode switch Slow Mode switch allows your system to provide better overclocking margins when using the LN2 cooling system.
ASUS MAXIMUS V EXTREME 1-31 Chapter 1 1.2.7 Jumpers 1. LN2 Mode Jumper (3-pin LN2) When enabled, the LN2 Mode jumper allows your system to eliminate the cold bugs in the processor during POST . It allows the processor to run at an extremely low temperature and helps the system boot fast.
1-32 Chapter 1: Product introduction Chapter 1 1.2.8 Onboard LEDs 1. Hard Disk LED The hard disk LED is designed to indicate the hard disk activity . It blinks when data is being written into or read from the hard disk drive.
ASUS MAXIMUS V EXTREME 1-33 Chapter 1 4. Power LED The motherboard comes with a power-on button that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
1-34 Chapter 1: Product introduction Chapter 1 6. Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. 5. BIOS LED The BIOS LEDs help indicate the BIOS activity .
ASUS MAXIMUS V EXTREME 1-35 Chapter 1 Q-Code table (continued on the next page) Code Description 00 Not used 01 Power on. Reset type detection (soft/hard).
1-36 Chapter 1: Product introduction Chapter 1 Q-Code table (continued on the next page) Code Description 50 – 53 Memory initialization error. Invalid memory type or incompatible memory speed 54 Uns.
ASUS MAXIMUS V EXTREME 1-37 Chapter 1 Code Description 3B – 3E Post-Memory PCH initialization is started 4F DXE IPL is started 50 – 53 Memory initialization error.
1-38 Chapter 1: Product introduction Chapter 1 Code Description F9 Recovery capsule is not found F A Invalid recovery capsule FB – FF Reserved for future AMI error codes 60 DXE Core is started 61 NV.
ASUS MAXIMUS V EXTREME 1-39 Chapter 1 Code Description 9C USB Detect 9D USB Enable 9E – 9F Reserved for future AMI codes A0 IDE initialization is started A1 IDE Reset A2 IDE Detect A3 IDE Enable A4 .
1-40 Chapter 1: Product introduction Chapter 1 Code Description D2 PCH initialization error D3 Some of the Architectural Protocols are not available D4 PCI resource allocation error .
ASUS MAXIMUS V EXTREME 1-41 Chapter 1 1.2.9 Internal connectors 1. Intel ® Z77 Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_1-2 [red]) These connectors connect to Serial A T A 6.
1-42 Chapter 1: Product introduction Chapter 1 2. Intel ® Z77 Serial A T A 3.0 Gb/s connectors (7-pin SA T A3G_1-2 [black]; ESA T A3G [black]) These connectors connect to Serial A T A 3.0 Gb/s hard disk drives and optical disc drives via Serial A T A 3.
ASUS MAXIMUS V EXTREME 1-43 Chapter 1 3. Asmedia ® Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_E12/E34 [red]) These connectors connect to Serial A T A 6.0 Gb/s hard disk drives via Serial A T A 6.0 Gb/s signal cables. Y ou must install Windows ® XP Service Pack 3 or later versions before using Serial A T A hard disk drives.
1-44 Chapter 1: Product introduction Chapter 1 5. USB 3.0 connector (20-1 pin USB3_34; USB3_E34) This connector is for the additional USB 3.0 ports, and complies with the USB 3.0 specicaton that supports up to 480 MBps connection speed. If the USB 3.
ASUS MAXIMUS V EXTREME 1-45 Chapter 1 Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! Y ou can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) rst, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
1-46 Chapter 1: Product introduction Chapter 1 8. CPU, chassis, and optional fan connectors (4-pin CPU_F AN; 4-pin CPU_OPT ; 4-pin CHA_F AN1-3; OPT_F AN1-3) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector .
ASUS MAXIMUS V EXTREME 1-47 Chapter 1 9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
1-48 Chapter 1: Product introduction Chapter 1 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W . • Do not forget to connect the 4-pin/8-pin EA TX12 V power plug.
ASUS MAXIMUS V EXTREME 1-49 Chapter 1 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
1-50 Chapter 1: Product introduction Chapter 1 12. EZ Plug connectors (6-pin EZ_PLUG_1; 4-pin EZ_PLUG_2) These connectors provide additional power to PCIe_x16 slots and back IO ports. Connect a 6-pin power cable to EZ_PLUG_1 when installing multiple display cards to provide sufcient power supply .
ASUS MAXIMUS V EXTREME 1-51 Chapter 1 14. VGA Hotwire connectors The VGA Hotwire connectors allow you to precisely adjust the VGA card voltage directly from motherboard BIOS, OC Key or T urboV EVO, reducing the risk of damaging your VGA cards.
1-52 Chapter 1: Product introduction Chapter 1 1.2.10 ProbeIt The ROG ProbeIt allows you to detect your system’s current voltage and OC settings. Use a multimeter to measure the ProbeIt points even during overclocking. See the illustration below to locate the respective ProbeIt points.
ASUS MAXIMUS V EXTREME 2-1 Chapter 2 Basic Installation 2 2.1 Building your PC system 2.1.1 Motherboard installation The diagrams in this section are for reference only . The motherboard layout may vary with models, but the installation steps are the same for all models.
2-2 Chapter 2: Basic Installation Chapter 2 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel.
ASUS MAXIMUS V EXTREME 2-3 Chapter 2 3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
2-4 Chapter 2: Basic Installation Chapter 2 2.1.2 CPU installation The LGA1 156 CPU is not compatible with the LGA1 155 socket. DO NOT install an LGA1 156 CPU on the LGA1 155 socket.
ASUS MAXIMUS V EXTREME 2-5 Chapter 2 2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary .
2-6 Chapter 2: Basic Installation Chapter 2 T o uninstall the CPU heatsink and fan assembly 2 A B B A 1.
ASUS MAXIMUS V EXTREME 2-7 Chapter 2 1 2 3 T o remove a DIMM 2.1.4 DIMM installation B A.
2-8 Chapter 2: Basic Installation Chapter 2 2.1.5 A TX Power connection 1 2 OR OR.
ASUS MAXIMUS V EXTREME 2-9 Chapter 2 2.1.6 SA T A device connection OR 2 OR 1.
2-10 Chapter 2: Basic Installation Chapter 2 2.1.7 Front I/O Connector T o install ASUS Q-Connector IDE_LED POWER SW RESET SW IDE_LED- IDE_LED+ PWR Reset Ground Ground 1 2 USB 2.0 AAFP T o install USB 2.0 connector T o install front panel audio connector USB 3.
ASUS MAXIMUS V EXTREME 2-1 1 Chapter 2 2.1.8 Expansion Card installation T o install PCIe x16 cards T o install PCIe x1 cards.
2-12 Chapter 2: Basic Installation Chapter 2 2.1.9 mPCIe Combo installation The mPCIe Combo is a mini card that allows you to add an mPCIe module and an mSA T A module into your motherboard. • The mPCIe Combo supports half-sized mPCIe modules (26.8mm x 30mm) only .
ASUS MAXIMUS V EXTREME 2-13 Chapter 2 3. Press down the Wi-Fi module, and secure it in place by using the screws removed earlier . DO NOT overtighten the screws to prevent damage to the mPCIe Wi-Fi module or mPCIe Combo. Be sure to install the Bluetooth driver before installing the Wi-Fi GO! software.
2-14 Chapter 2: Basic Installation Chapter 2 5. Locate the mPCIe_Combo connector on the motherboard. Align and insert the mPCIe Combo on the connector . • The mPCIe Combo ts in one orientation only . • Insert the mPCIe Combo with caution to prevent damage to the module, or the mCPIe_Combo connector pins, or the motherboard.
ASUS MAXIMUS V EXTREME 2-15 Chapter 2 7. Remove the bolt from the Wi-Fi antenna connector . Leave the washer on the connector . 8. Insert the connector into the I/O shield’s Wi-Fi port hole. Ensure that the washer is placed between the connector and the back of the I/O shield.
2-16 Chapter 2: Basic Installation Chapter 2 Installing the mSA T A module T o install the mSA T A module: 1. Unlock the mSA T A clip. B A 2. Insert the mSA T A card into the MSA T A slot. The mSA T A card ts in one orientation only . 3. Lock the mSA T A clip.
ASUS MAXIMUS V EXTREME 2-17 Chapter 2 4. Remove the screw near the 26-pin connector . 5. Locate the mPCIe_Combo connector on the motherboard. Align and insert the mPCIe Combo on the connector .
2-18 Chapter 2: Basic Installation Chapter 2 6. Secure the mPCIe Combo in place with the screw removed in step 4..
ASUS MAXIMUS V EXTREME 2-19 Chapter 2 2.2 BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port, press the USB BIOS Flashback button for three seconds, and the BIOS is updated automatically .
2-20 Chapter 2: Basic Installation Chapter 2 2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port denitions. Rear panel connectors 1. Clear CMOS button 2.
ASUS MAXIMUS V EXTREME 2-21 Chapter 2 * LAN ports LED indications • Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows ® OS environment and after the USB 3.0 driver installation. • USB 3.0 devices can only be used as data storage only .
2-22 Chapter 2: Basic Installation Chapter 2 Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers.
ASUS MAXIMUS V EXTREME 2-23 Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers.
2-24 Chapter 2: Basic Installation Chapter 2 Connect to 7.1 channel Speakers.
ASUS MAXIMUS V EXTREME 2-25 Chapter 2 2.3.3 OC Key device installation The OC Key device allows quick on-screen overclocking adjustments. Follow the instruction below to install the OC Key device to your system. 3. Plug the other end of the OC Key cable to the OC Key device.
2-26 Chapter 2: Basic Installation Chapter 2 4. Plug in the DVI male connector of the OC Key device to the DVI female connector on the display card. 5.
ASUS MAXIMUS V EXTREME 2-27 Chapter 2 3. Use the <Up>, <Down>, <Left> and <Right> to move the highlighted item, use the <Enter> key to enter an item, use the <ESC> key to exit an item, and use the <F10> key to save settings.
2-28 Chapter 2: Basic Installation Chapter 2 2.4 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis.
ASUS MAXIMUS V EXTREME 3-1 Chapter 3 BIOS setup 3 3.1 Knowing BIOS The new ASUS UEFI BIOS is a Unied Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more exible and convenient mouse input.
3-2 Chapter 3: BIOS setup Chapter 3 3.2 BIOS setup program Use the BIOS Setup to update the BIOS or congure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program.
ASUS MAXIMUS V EXTREME 3-3 Chapter 3 3.2.1 EZ Mode The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority .
3-4 Chapter 3: BIOS setup Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations.
ASUS MAXIMUS V EXTREME 3-5 Chapter 3 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Extreme T weaker, Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items.
3-6 Chapter 3: BIOS setup Chapter 3 3.3 Extreme T weaker menu The Extreme T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Extreme T weaker menu items. Incorrect eld values can cause the system to malfunction.
ASUS MAXIMUS V EXTREME 3-7 Chapter 3 Load Gamers’ OC Prole Press <Enter> and select Y es to load the Gamers’ OC prole to suit extreme overclocking. CPU Level Up [Disabled] Allows you to select a CPU level, and the related parameters will be automatically adjusted according to the selected CPU level.
3-8 Chapter 3: BIOS setup Chapter 3 EPU Power Saving Mode [Disabled] Allows you to enable or disable the EPU power saving function. Conguration options: [Disabled] [Enabled] EPU Setting [Auto] This item only appears when you set the EPU Power Saving Mode to [Enabled].
ASUS MAXIMUS V EXTREME 3-9 Chapter 3 Load Tight Hynix Prole Allows you to load a tight timing prole for Hynix chipset. Conguration options: [Y es] [No] Load Loose Hynix Prole Allows you to load a loose timing prole for Hynix chipset.
3-10 Chapter 3: BIOS setup Chapter 3 Secondary Timings DRAM RAS# to RAS# Delay [Auto] Conguration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock] DRAM REF Cycle Time [Auto] Conguration option.
ASUS MAXIMUS V EXTREME 3-1 1 Chapter 3 tRRSR [Auto] Conguration options: [Auto] [4 DRAM Clock] – [7 DRAM Clock] tWW (DD) [Auto] Conguration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock] tW.
3-12 Chapter 3: BIOS setup Chapter 3 GPU.DIMM Post The sub-items in this menu display the status of the installed VGA cards and memory . The elds show N/A if there are no devices installed on the slots. CPU Power Management The sub-items in this menu allow you to set the CPU ratio and features.
ASUS MAXIMUS V EXTREME 3-13 Chapter 3 Primary Plane Current Limit [Auto] Maximum instantaneous current allowed at any given time for CPU cores Use <+> and <-> key to adjust the value at 0.125A increment. . Secondary Plane Current Limit [Auto] Maximum instantaneous current allowed at any given time for Internal Graphics cores.
3-14 Chapter 3: BIOS setup Chapter 3 CPU Power Duty Control [T .Probe] [T .Probe] Maintains the VRM thermal balance. [Extreme] Maintains the VRM current balance. CPU Current Capability [Auto] This item provides wider total power range for overclocking.
ASUS MAXIMUS V EXTREME 3-15 Chapter 3 DRAM Power Thermal Control [1 10] A higher temperature brings a wider DRAM power thermal range, and extends the overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to adjust the value.
3-16 Chapter 3: BIOS setup Chapter 3 VGA1/2 Core V oltage [Auto] Allows you to increase or decrease the over-voltage capability on VGA1/2 core. Use the <+> and <-> keys to adjust the value. The values range from -96 to +222. • Ensure to connect the VGA Hotwire cable from your motherboard to the VGA card.
ASUS MAXIMUS V EXTREME 3-17 Chapter 3 CPU Manual V oltage [Auto] This item appears only when you set the CPU V oltage item to [Manual Mode] and allows you to set a xed CPU voltage. The values range from 0.800V to 1.920V with a 0.005V interval. The 2.
3-18 Chapter 3: BIOS setup Chapter 3 CPU PLL V oltage [Auto] Allows you to set the CPU PLL voltage. The values range from 1.25V to 2.50V with a 0.00625V interval. Skew Driving V oltage [Auto] Allows you to set the Skew Driving V oltage. The values range from 0.
ASUS MAXIMUS V EXTREME 3-19 Chapter 3 PLL Skew [Auto] This setting allows you to increase the overclocking capability . Conguration options: [Auto] [-12]—[+12] PCIE Drive Strength [Auto] This setting allows you to increase or decrease the PCIE drive strength.
3-20 Chapter 3: BIOS setup Chapter 3 3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
ASUS MAXIMUS V EXTREME 3-21 Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
3-22 Chapter 3: BIOS setup Chapter 3 T o change a user password: 1. Select the User Password item and press <Enter>. 2. From the Enter Current Password box, key in the current password, then press <Enter>. 3. From the Create New Password box, key in a new password, then press <Enter>.
ASUS MAXIMUS V EXTREME 3-23 Chapter 3 3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
3-24 Chapter 3: BIOS setup Chapter 3 3.5.1 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down.
ASUS MAXIMUS V EXTREME 3-25 Chapter 3 Execute Disable Bit [Enabled] [Enabled] Enables the No-Execution Page Protection T echnology . [Disabled] Forces the XD feature ag to always return to zero (0).
3-26 Chapter 3: BIOS setup Chapter 3 High Precision Timer [Enabled] Allows you to enable or disable the High Precision Event T imer . Conguration options: [Enabled] [Disabled] Intel (R) Rapid Start T echnology [Disabled] Allows you to enable or disable Intel Rapid Start T echnology .
ASUS MAXIMUS V EXTREME 3-27 Chapter 3 3.5.3 SA T A Conguration While entering Setup, the BIOS automatically detects the presence of SA T A devices. The SA T A Port items show Not Present if no SA T A device is installed to the corresponding SA T A port.
3-28 Chapter 3: BIOS setup Chapter 3 Memory Remap Feature [Enabled] Allows you to enable remapping the memory above 4GB. [Enabled] Enables the function. [Disabled] Disables this function. Graphics Conguration Allows you to select a primary display from iGPU, and PCIe graphical devices.
ASUS MAXIMUS V EXTREME 3-29 Chapter 3 Render Standby [Enabled] Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use when idle. Conguration options: [Disabled] [Enabled] iGPU Multi-Monitor [Disabled] Allows you to enable the iGPU Multi-Monitor .
3-30 Chapter 3: BIOS setup Chapter 3 3.5.5 Intel ® Thunderbolt TB Controller [Enabled] Allows you to enable or disable the Thunderbolt function. Conguration options: [Enabled] [Disabled] W ake From Thunderbolt Devices [Enabled] Allows you to enable or disable the function to wake the system from Thunderbolt devices.
ASUS MAXIMUS V EXTREME 3-31 Chapter 3 Thunderbolt resource allocation prole [Minimum Resource allocation] Allows you to select a pre-dened prole to allocate Thunderbolt resources for Thunderbolt- equipped devices connected to this motherboard.
3-32 Chapter 3: BIOS setup Chapter 3 Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Disabled] The USB devices can be used only for the BIOS setup program. [Auto] Allows the system to detect the presence of USB devices at startup.
ASUS MAXIMUS V EXTREME 3-33 Chapter 3 3.5.7 Onboard Devices Conguration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] [Enabled] Enables the High Denition Audio Controller. [Disabled] Disables the controller . The following two items appear only when you set the Azalia HD Audio item to [Enabled].
3-34 Chapter 3: BIOS setup Chapter 3 Bluetooth Controller [Enabled] Allows you to enable or disable the Bluetooth controller . Conguration options: [Enabled] [Disabled] Wi-Fi Controller [Enabled] Allows you to enable or disable the Wi-Fi controller .
ASUS MAXIMUS V EXTREME 3-35 Chapter 3 3.5.8 APM ErP Ready [Disabled] This item allows you to switch off some power at S5 to get the system ready for ErP requirement.
3-36 Chapter 3: BIOS setup Chapter 3 3.5.9 Network Stack Network Stack [Disable Link] This item allows you to disable or enable the UEFI network stack. Conguration options: [Disable Link] [Enable] The following items appear only when you set the Network Stack to [Enabled].
ASUS MAXIMUS V EXTREME 3-37 Chapter 3 3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Anti Surge Support [Enabled] This item allows you to enable or disable the Anti Surge function.
3-38 Chapter 3: BIOS setup Chapter 3 Fan Speed Control CPU Q-Fan Control [Disabled] Allows you to enable or disable the CPU fan controller . [Disabled] Disables the CPU Q-fan controller. [Enabled] Enables the CPU Q-fan controller . The following three items appear when you enable the CPU Fan Control feature.
ASUS MAXIMUS V EXTREME 3-39 Chapter 3 Chassis Q-Fan Control 1-3 [Disabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature.
3-40 Chapter 3: BIOS setup Chapter 3 Profile Mode Allows you to set the optional fans’ proles. Conguration options: [Performance] [Optional] [Silent] User Mode Allows you to set the optional fan’s speed temperature. OPT1-3 Low Speed T emp [25%] Allows you to set the optional fans’ low speed temperature.
ASUS MAXIMUS V EXTREME 3-41 Chapter 3 3.7 Boot menu The Boot menu items allow you to change the system boot options. Scroll down to display the other BIOS items. Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off].
3-42 Chapter 3: BIOS setup Chapter 3 Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so.
ASUS MAXIMUS V EXTREME 3-43 Chapter 3 3.8 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2.
3-44 Chapter 3: BIOS setup Chapter 3 Label Allows you to input the label of the setup proles. Save to Prole Allows you to save the current BIOS settings to the BIOS Flash, and create a prole. Key in a prole number from one to eight, press <Enter>, and then select Y es .
ASUS MAXIMUS V EXTREME 3-45 Chapter 3 3.8.4 GO Button File Allows you to set the GO Button les and load the desired GO Button le. BCLK/PCIE Frequency; CPU V oltage; DRAM V oltage; VCCSA V oltage.
3-46 Chapter 3: BIOS setup Chapter 3 3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.
ASUS MAXIMUS V EXTREME 3-47 Chapter 3 3.10 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability , compatibility , or performance. However , BIOS updating is potentially risky . If there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
3-48 Chapter 3: BIOS setup Chapter 3 Launching ASUS Update T o launch ASUS Update, click Update > ASUS Update on the AI Suite II main menu bar . Quit all Windows® applications before you update the BIOS using this utility . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1.
ASUS MAXIMUS V EXTREME 3-49 Chapter 3 • The screenshots in this section are for reference only . The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www .asus.com for detailed software conguration.
3-50 Chapter 3: BIOS setup Chapter 3 3.10.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility . Before you start using this utility , download the latest BIOS from the ASUS website at www .
ASUS MAXIMUS V EXTREME 3-51 Chapter 3 • This function can support devices such as a USB ash disk with F A T 32/16 format and single partition only . • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability .
3-52 Chapter 3: BIOS setup Chapter 3 3.10.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update the BIOS in DOS environment. This utility also allows you to copy the current BIOS le that you can use as a backup when the BIOS fails or gets corrupted during the updating process.
ASUS MAXIMUS V EXTREME 3-53 Chapter 3 3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number . 4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C (optical drive) to Drive D (USB ash drive).
3-54 Chapter 3: BIOS setup Chapter 3 4. Select Y es and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater . Restart your computer . DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.
ASUS MAXIMUS V EXTREME 4-1 Chapter 4 Software support 4 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .
4-2 Chapter 4: Software support Chapter 4 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual les are in Portable Document Format (PDF).
ASUS MAXIMUS V EXTREME 4-3 Chapter 4 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information.
4-4 Chapter 4: Software support Chapter 4 4.3.2 T urboV EVO ASUS T urboV EVO allows you to manually adjust the CPU frequency and related voltages such as CPU Level Up that offers automatic and easy overclocking and system boost performance. T o launch T urboV EVO, click T ool > T urboV EVO on the AI Suite II main menu bar .
ASUS MAXIMUS V EXTREME 4-5 Chapter 4 Using Advanced Mode Click on the Advanced Mode tab to adjust the advanced voltage settings. Current values T arget values V oltage Adjustment bars Click to restore.
4-6 Chapter 4: Software support Chapter 4 CPU Ratio Allows you to manually adjust the CPU ratio. • The rst time you use CPU Ratio , go to AI T weaker > CPU Power Management in BIOS and set the T urbo Ratio item to [Maximum T urbo Ratio setting in OS] .
ASUS MAXIMUS V EXTREME 4-7 Chapter 4 CPU Level Up ASUS T urboV EVO provides you with CPU Level Up mode for the most exible CPU auto- tuning options.
4-8 Chapter 4: Software support Chapter 4 4.3.3 DIGI+ Power Control ASUS DIGI+ Power Control allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability . It also provides the highest power efciency , generating less heat to prolong the component lifespan and minimize power loss.
ASUS MAXIMUS V EXTREME 4-9 Chapter 4 CPU Power CPU Load-line Calibration It allows you to adjust the voltage settings and control the system temperature. Higher load-line calibration could get higher voltage and good overclocking performance but increases the CPU and VRM thermal conditions.
4-10 Chapter 4: Software support Chapter 4 Application help Applies all the changes immediately Undoes all the changes Click to view more settings VRM Protection Threshold It allows you to set the VRM protection to your motherboard from overheating accidents.
ASUS MAXIMUS V EXTREME 4-1 1 Chapter 4 DRAM Power Application help Applies all the changes immediately Undoes all the changes DRAM Current Capability A higher value brings a wider total power range and extends the overclocking frequency range simultaneously .
4-12 Chapter 4: Software support Chapter 4 • Select From EPU Installation to show the CO2 that has been reduced since you installed EPU. • *Select From the Last Reset to show the total CO2 that has been reduced since you click the Clear button . • Refer to the software manual in the support DVD or visit the ASUS website at www.
ASUS MAXIMUS V EXTREME 4-13 Chapter 4 4.3.5 Wi-Fi GO! Wi-Fi GO! allows you to wirelessly stream media les to DLNA devices, remotely control and access your computer using your mobile device, and easily transfer les between your computer and mobile device.
4-14 Chapter 4: Software support Chapter 4 Launch Wi-Fi GO! Remote on your mobile device to use Wi-Fi GO! Remote control functions. For more details, refer to next section Wi-Fi GO! Remote . Wi-Fi GO! Remote Install the Wi-Fi GO! Remote application on your mobile device to use Wi-Fi GO!’s remote control functions.
ASUS MAXIMUS V EXTREME 4-15 Chapter 4 • T ap ON to enable Smart Motion Control, File Transfer and Capture and Send. • The Wi-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system.
4-16 Chapter 4: Software support Chapter 4 Using the DLNA Media Hub 1. From the main screen, click DLNA Media Hub . 2. Click to select a device as your receiver .
ASUS MAXIMUS V EXTREME 4-17 Chapter 4 4. Click any of the tabs to select your preferred media le type. • Only computers under Windows ® 7 support the DLNA Media Hub function. • Keep the Windows ® Media Player open. Ensure that your media le formats are supported on Windows ® Media Player and DLNA playback devices.
4-18 Chapter 4: Software support Chapter 4 T o edit the music playlist: 1. Tick Playlist . 2. Click . 3. Tick to select or deselect the music le and click Save Prole . 4. Select the prole name and click Save . T o add as a new playlist, key in your prole name and click Save .
ASUS MAXIMUS V EXTREME 4-19 Chapter 4 T o edit the video playlist: 1. Tick Playlist . 2. Click . 3. Tick to select or deselect the video le and click Save Prole . 4. Select the prole name and click Save . T o add as a new playlist, key in your prole name and click Save .
4-20 Chapter 4: Software support Chapter 4 T o edit the image playlist: 1. Tick Playlist . 2. Click . 3. Tick to select or deselect the image le and click Save Prole . 4. Select the prole name and click Save . T o add as a new playlist, key in your prole name and click Save .
ASUS MAXIMUS V EXTREME 4-21 Chapter 4 3. T ap Music , Video or Photo , select a le and tap . Y our mobile device’s Wi-Fi GO! interface may vary with the mobile device’s operating system. Remote Desktop Remote Desktop allows you to view your computer’s desktop and remotely operate your computer in real-time from your mobile device.
4-22 Chapter 4: Software support Chapter 4 Using the Remote Desktop via Wi-Fi GO! Remote When the Remote Desktop is enabled, the mobile device shows the contents of your desktop. The Wi-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system.
ASUS MAXIMUS V EXTREME 4-23 Chapter 4 Remote Keyboard and Mouse Allows you to use your mobile device’s touch panel as a remote keyboard and mouse for your computer .
4-24 Chapter 4: Software support Chapter 4 Smart Motion Control Allows you to customize your motions in your computer to launch an application or function using your remote-enabled mobile device. Y our device must support a motion sensor function. Before using Smart Motion Control, ensure that your computer is connected to your mobile device.
ASUS MAXIMUS V EXTREME 4-25 Chapter 4 7. In the Camera tab, click to take pictures, or click to record a movie. The les are automatically saved in the mobile device’s SD card. File T ransfer Allows you to transfer les wirelessly between your computer and mobile device.
4-26 Chapter 4: Software support Chapter 4 Using File T ransfer via Wi-Fi GO! Remote When File T ransfer is enabled, the mobile device shows the les in your mobile device. T ap to select les for transfer T ap to send selected les T ap to select all les T ap to clear all les Using File T ransfer 1.
ASUS MAXIMUS V EXTREME 4-27 Chapter 4 Securing your computer for Wi-Fi GO! Remote functions Wi-Fi GO! Settings allows you to create a password for your computer . T o create a password: 1. Click in the main menu. 2. Tick Use Password and key in your password.
4-28 Chapter 4: Software support Chapter 4 4.3.6 F AN Xpert 2 F AN Xpert 2 automatically detects and tweaks all fan speeds, and provides you with optimized fan settings based on the fans’ specications and positions. Launching F AN Xpert 2 T o launch F AN Xpert 2, click T ool > F AN Xpert 2 from the AI Suite menu bar .
ASUS MAXIMUS V EXTREME 4-29 Chapter 4 3. From the Fan Position screen, check and assign the locations of your fans, then click OK to exit the screen. DO NOT remove your fan during the Fan Auto T uning process. 4. Select any of these fan customized settings for each fan.
4-30 Chapter 4: Software support Chapter 4 Advanced Mode F AN Xpert 2’s Advanced Mode button allows you to adjust the reaction speed for fan rotation based on the system’s temperature and to congure the fan’s rotation per minute.
ASUS MAXIMUS V EXTREME 4-31 Chapter 4 RPM Fixed Mode The RPM Fixed Mode tab allows you to set your fan speed when CPU temperature is below 75 degrees. Click and drag to make the adjustments Click to s.
4-32 Chapter 4: Software support Chapter 4 Click to see the results in graph format Click to see the results in table format Fan Information Click to see the details of each detected fan. Y ou can click on either to see the results in table format or to see the results in graph format.
ASUS MAXIMUS V EXTREME 4-33 Chapter 4 4.3.7 USB 3.0 Boost ASUS USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) and automatically increases a USB 3.0 device’s transfer speed up to 170%. Launching USB 3.0 Boost T o launch USB 3.0 Boost, click T ool > USB 3.
4-34 Chapter 4: Software support Chapter 4 4.3.8 Ai Charger+ This utility allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**. • * Check your manufacturer if your USB device is a Battery Charging Specication 1.
ASUS MAXIMUS V EXTREME 4-35 Chapter 4 • The utility cannot detect the devices connected to your computer if the charging mode is enabled. • Some USB devices may not support fast-charging with USB Charger+ to protect the voltage settings.
4-36 Chapter 4: Software support Chapter 4 Setting up the charging function When a portable device is connected to the USB port of the PC, the USB Charger+ automatically detects the kind of your device. Charging the device Click to fast-charge your device.
ASUS MAXIMUS V EXTREME 4-37 Chapter 4 4.3.10 Probe II Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others.
4-38 Chapter 4: Software support Chapter 4 4.3.1 1 Sensor Recorder Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate specic time spans on record to keep track of the three system statuses for certain purposes.
ASUS MAXIMUS V EXTREME 4-39 Chapter 4 Using History Record 1. Click the History Record tab and adjust the settings on the left for Record Interval and Record Duration according to need. 2. Click Start Recording to start measuring and recording each sensor .
4-40 Chapter 4: Software support Chapter 4 4.3.12 ASUS Update ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows ® environment. Launching ASUS Update T o launch ASUS Update, click Update > ASUS Update on the AI Suite II main menu bar .
ASUS MAXIMUS V EXTREME 4-41 Chapter 4 4.3.13 MyLogo2 MyLogo2 allows you to customize the boot logo, which is the image that appears on the screen during the Power On Self T ests (POST). Launching MyLogo2 T o launch MyLogo2, click Update > MyLogo on the AI Suite II main menu bar.
4-42 Chapter 4: Software support Chapter 4 5. Click Flash to update the boot logo. 6. When prompted, click Y es to reboot the system. Y ou will see the new boot logo the next time you start up the system. Ensure to enable the Full Screen Logo in BIOS to use this feature.
ASUS MAXIMUS V EXTREME 4-43 Chapter 4 A. Realtek HD Audio Manager for Windows ® 7™ / Vista™ B. Realtek HD Audio Manager for Windows ® XP • Refer to the software manual in the support DVD or visit the ASUS website at www. asus.com for detailed software conguration.
4-44 Chapter 4: Software support Chapter 4 4.3.15 ROG Connect ROG Connect allows you to monitor and adjust the local PC through your remote PC. Setting up USB connection between your local and remote PC • Install ROG Connect on the remote PC from the provided Support DVD before using ROG Connect.
ASUS MAXIMUS V EXTREME 4-45 Chapter 4 RC Poster RC Poster shows the status of the local system during the POST . Y ou can switch the display mode between String and Code. RC Remote RC Remote allows you to operate your local system through the ROG Connect cable.
4-46 Chapter 4: Software support Chapter 4 GPU T weakIt GPU T weakIt allows you to control and monitor the installed GPU on the local system. Use the sliders to adjust the values and click Apply to save your customized settings. 4.3.16 MemT weakIt MemT weakIt allows you to adjust the timing of your installed memory .
ASUS MAXIMUS V EXTREME 4-47 Chapter 4 4. Click About tab and click REPUBLIC OF GAMERS to access ROG ofcial website. 5. Click OK to exit MemT weakIt. V alidating and saving your MemT weakIt settings T o validate and save your conguration online: 1.
4-48 Chapter 4: Software support Chapter 4 T o validate and save your conguration manually: 1. Launch MemT weakIt and click V alidate . 2. In Manual Mode , click Save Conguration File . 3. Key in a le name for your conguration le and click Save .
ASUS MAXIMUS V EXTREME 5-1 Chapter 5 RAID support 5 5.1 RAID congurations The motherboard supports the following SA T A RAID solutions: • Intel ® Rapid Storage T echnology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • Y ou must install Windows ® XP Service Pack 3 or later versions before using Serial A T A hard disk drives.
5-2 Chapter 5: RAID support Chapter 5 5.1.2 Installing Serial A T A hard disks The motherboard supports Serial A T A hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array . T o install the SA T A hard disks for a RAID conguration: 1.
ASUS MAXIMUS V EXTREME 5-3 Chapter 5 5.1.4 Intel ® Rapid Storage T echnology Option ROM utility T o enter the Intel ® Rapid Storage T echnology Option ROM utility: 1. Turn on the system. 2. During POST , press <Ctrl> + <I> to display the utility main menu.
5-4 Chapter 5: RAID support Chapter 5 Creating a RAID set T o create a RAID set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>.
ASUS MAXIMUS V EXTREME 5-5 Chapter 5 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive.
5-6 Chapter 5: RAID support Chapter 5 Deleting a RAID set Be cautious when deleting a RAID set. Y ou will lose all data on the hard disk drives when you delete a RAID set. T o delete a RAID set: 1. From the utility main menu, select 2. Delete RAID V olume and press <Enter>.
ASUS MAXIMUS V EXTREME 5-7 Chapter 5 Exiting the Intel ® Rapid Storage T echnology Option ROM utility T o exit the utility: 1. From the utility main menu, select 5.
5-8 Chapter 5: RAID support Chapter 5 5.2 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing a Windows ® operating system on a hard disk drive that is included in a RAID set. • The motherboard does not provide a oppy drive connector .
ASUS MAXIMUS V EXTREME 5-9 Chapter 5 5.2.3 Installing the RAID driver during Windows ® OS installation T o install the RAID driver in Windows ® XP: 1. During the OS installation, the system prompts you to press the <F6> key to install third-party SCSI or RAID driver .
5-10 Chapter 5: RAID support Chapter 5 5.2.4 Using a USB oppy disk drive Due to OS limitation, Windows ® XP may not recognize the USB oppy disk drive when you install the RAID driver from a oppy disk during the OS installation.
ASUS MAXIMUS V EXTREME 5-1 1 Chapter 5 8. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem le. 9. T ype the following line to the bottom of the two sections: id = “USBVID_xxxx&PID_xxxx”, “usbstor” Add the same line to both sections.
5-12 Chapter 5: RAID support Chapter 5.
ASUS MAXIMUS V EXTREME 6-1 Chapter 6 Multiple GPU support 6 6.1 AMD ® CrossFireX™ technology The motherboard supports the AMD ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
6-2 Chapter 6: Multiple GPU support Chapter 6 6.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only . The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.
ASUS MAXIMUS V EXTREME 6-3 Chapter 6 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately . 6. Connect a VGA or a DVI cable to the graphics card. 6.1.4 Installing three CrossFireX™ graphics cards 1.
6-4 Chapter 6: Multiple GPU support Chapter 6 6.1.5 Installing four CrossFireX™ graphics cards 1. Prepare four CrossFireX-ready graphics cards. 2. Insert the four graphics card into the PCIEX16 slots.
ASUS MAXIMUS V EXTREME 6-5 Chapter 6 6.1.6 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology .
6-6 Chapter 6: Multiple GPU support Chapter 6 1 Enabling Dual CrossFireX technology 1. In the Catalyst Control Center window , click Performance > AMD CrossFireX TM . 2. Select Enable CrossFireX TM . 3. Select a GPU combination from the drop-down list.
ASUS MAXIMUS V EXTREME 6-7 Chapter 6 6.2 NVIDIA ® SLI™ technology The motherboard supports the NVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
6-8 Chapter 6: Multiple GPU support Chapter 6 4. Align and rmly insert the SLI bridge connector to the goldngers on each graphics card. Ensure that the connector is rmly in place. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately .
ASUS MAXIMUS V EXTREME 6-9 Chapter 6 4. Align and rmly insert the 3-way SLI bridge connector to the goldngers on each graphics card. Ensure that the connector is rmly in place. 5. Connect three independent auxiliary power sources from the power supply to the three graphics cards.
6-10 Chapter 6: Multiple GPU support Chapter 6 6.2.5 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the NVIDIA ® SLI™ technology .
ASUS MAXIMUS V EXTREME 6-1 1 Chapter 6 B2. From the Screen Resolution window, click Advanced settings . B3. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window , select Congure SLI , Surround , PhysX .
6-12 Chapter 6: Multiple GPU support Chapter 6 6.3 LucidLogix Virtu MVP LucidLogix Virtu MVP allows your computer’s VGA output and discrete graphic cards to perform better , respond faster and process media les smoother within a low power environment.
ASUS MAXIMUS V EXTREME 6-13 Chapter 6 6.3.2 Setting up your display LucidLogix Virtu MVP solution comes with two distinct modes that allows you to e njoy better graphics either from your built-in video output (i-Mode) or from a discrete graphics card (d- Mode).
6-14 Chapter 6: Multiple GPU support Chapter 6 6.3.3 Conguring LucidLogix Virtu MVP Launch the Virtu MVP Control Panel to allow you to congure the main features, adjust the performance settings and select applications for graphical virtualization.
ASUS MAXIMUS V EXTREME 6-15 Chapter 6 Click to turn Hyperformance® ON or OFF Click to turn Virtual Vsync ON or OFF Performance Allows you to turn ON/OFF the Hyperformance ® or Virtual Vsync function.
6-16 Chapter 6: Multiple GPU support Chapter 6 See the descriptions of these columns below: • D column allows you to run applications with the discrete graphic card. Select D to enable 3D graphical performance for that application. • I column allows to run applications with iGPU.
ASUS MAXIMUS V EXTREME 7-1 Chapter 7 Intel ® technologies 7 7.1 Intel ® 2012 Desktop responsiveness technologies This section details the overview of the installation and conguration procedures of the Intel® 2012 Desktop responsiveness technologies.
7-2 Chapter 7: Intel ® technologies Chapter 7 SSD Capacity Requirements SSD Partition Capacity Requirements System DRAM 2GB 4GB 8GB Intel ® storage combinations Intel ® Rapid Start 2GB 4GB 8GB Inte.
ASUS MAXIMUS V EXTREME 7-3 Chapter 7 7.1.1 Intel ® Smart Response T echnology Intel ® Smart Response T echnology boosts overall system performance. It uses an installed fast SSD (min. 20GB available) as a cache for frequently accessed operations, speeding up hard drive/main memory interaction.
7-4 Chapter 7: Intel ® technologies Chapter 7 3. Select Disable Acceleration to disable this function, and select Change Mode to switch acceleration mode to Enhanced/ Maximized. • T o enable Intel ® Smart Response T echnology , you need at least one SSD ( > 20GB) and an HDD, and only one SSD can be assigned for caching.
ASUS MAXIMUS V EXTREME 7-5 Chapter 7 3. Right click the New V olume that you want to shrink from, and select Shrink V olume. 4. If your SSD is not initialized and unformatted: a. Right click the disk that you want to create the partition, and select Initialize .
7-6 Chapter 7: Intel ® technologies Chapter 7 6. T o launch the disk partitioning tool, click Start > Programs > Accessories > Command Prompt tool . 7. T ype diskpart and press <Enter>. 8. In the diskpart prompt, type list disk after DISKP ART , and press <Enter>.
ASUS MAXIMUS V EXTREME 7-7 Chapter 7 The Hibernation Partition does not appear when you choose “GPT (GUID Partition T able store type”. Ensure the “Unallocated” disappears from the volume, and a new partition is identied. 13. Reboot the system after creating the partition.
7-8 Chapter 7: Intel ® technologies Chapter 7 Recovering the partition This procedure allows you to delete the Intel ® Rapid Start T echnology from your system, and recover the partition you made for the Intel Rapid ® Start T echnology installation.
ASUS MAXIMUS V EXTREME 7-9 Chapter 7 7. In the desktop, click Start , right-click Computer , and click Manage . 8. In the Computer Management window , click Disk Management , right click the shrinked new volume, and select Extend V olume . 9. As the Extend V olume Wizard appears, click Next .
7-10 Chapter 7: Intel ® technologies Chapter 7 10. Click Next after selecting the default selected disk. 1 1. Extend volume setup is completed. Click Finish to recover the Intel ® Rapid Start T echnology partition. 12. Reboot the system after deleting the partition.
ASUS MAXIMUS V EXTREME 7-1 1 Chapter 7 Click to enable or disable the function When the scroll bar is activated, adjust the waking up time period for Internet data update.
7-12 Chapter 7: Intel ® technologies Chapter 7 4. In the Advanced tab, set up the schedule during low power usage time period for power saving. This setting only applies to the assigned time period. 5. In the Help tab, click About to view the feature’s version.
ASUS MAXIMUS V EXTREME A-1 Appendices Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
A-2 Appendices Appendices IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.
ASUS MAXIMUS V EXTREME A-3 Appendices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr .
A-4 Appendices Appendices Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
ASUS MAXIMUS V EXTREME A-5 Appendices ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
A-6 Appendices Appendices DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539.
ASUS MAXIMUS V EXTREME A-7 Appendices DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539.
A-8 Appendices Appendices.
An important point after buying a device Asus MAXIMUS V EXTREME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus MAXIMUS V EXTREME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus MAXIMUS V EXTREME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus MAXIMUS V EXTREME you will learn all the available features of the product, as well as information on its operation. The information that you get Asus MAXIMUS V EXTREME will certainly help you make a decision on the purchase.
If you already are a holder of Asus MAXIMUS V EXTREME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus MAXIMUS V EXTREME.
However, one of the most important roles played by the user manual is to help in solving problems with Asus MAXIMUS V EXTREME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus MAXIMUS V EXTREME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
