Instruction/ maintenance manual of the product P5.2 Orion Car Audio
Go to page of 8
P5.2 P6.2.
INTRODUCTION Thank you for your purchase of the Orion P-Series Component Loudspeaker system. These speakers represent a combination of incredible performance and value. The P- series die-cast components feature aluminum-treated polypropylene cones and vapor- deposit titanium dome tweeters.
INST ALLA TION The performance of the P-Series Component Loudspeaker is directly proportional to the quality of installation. Care taken during the installation process will be rewarded with years of satisfying performance.
REAR DECK MOUNTING In rear deck installations, check the operation of the trunk suspension springs or tension bars. These tension bars move in the opening and closing of the trunk. Y ou cannot be too cautious during this part of the installation, In addition, do not locate the speakers too close to the back of the rear deck.
Step 9: Mount the speaker- The speaker is placed in the grille ring from the front. Place the speaker and the grille ring in the installa- tion hole. Align the mounting screw holes and drive in the four mounting screws. Push the perforated metal grille back into the grille ring.
FLUSH MOUNTING INTO REMOVED P ANELS (diagram A) Step 1: . Determine the tweeter mounting location, then route the wires from the crossover to the tweeter location. Step 2: Mark the center point of the tweeter location. Step 3: If using a hole saw , first drill a pilot hole, then cut out the hole using a standard 2-1/8" hole saw .
Model Orion P5.2 Orion P6.2 Nominal Impedance 4 ohms 4 ohms Power Continuous/Peak 100/150 100/150 Frequency Response 70Hz - 22kHz 60Hz - 22kHz Sensitivity 87 dB 89 dB Mounting Depth w/grille 2.
W arranty LIMITED TWO YEAR CONSUMER WARRANTY : Directed Electronics, Inc. promises to the original purchaser , to replace this product should it prove to be defective in workmanship or material under .
An important point after buying a device Orion Car Audio P5.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Orion Car Audio P5.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Orion Car Audio P5.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Orion Car Audio P5.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Orion Car Audio P5.2 will certainly help you make a decision on the purchase.
If you already are a holder of Orion Car Audio P5.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Orion Car Audio P5.2.
However, one of the most important roles played by the user manual is to help in solving problems with Orion Car Audio P5.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Orion Car Audio P5.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center