Instruction/ maintenance manual of the product 17RTVN Orion
Go to page of 52
17/19-INCH VALUE TTF-LCD MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference..
.
SAFETY INSTRUCTION ………………………………………………………………….. 2 ~ 3 CAUTIONS ………………………………………………………………........ .................. 4 FCC RF INTERFERENCE STATEMENT …………………………….
Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in ac cordance with the manufacturer ’s instructions.
- The apparatus shall not be exposed to dripping or splashing and that no objects f illed with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “W ARNING - T o reduce the risk of fire or electric sh ock, do not expose the appara tus to rain or moisture.
CAUTION The power supply cord is used as the main di sconnect device, ensure that the socket-outlet is located/installed near the equipm ent and is easily accessible.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference in a residential installation.
A. BOTTOM PANEL CONTROL 1. DC 12V IN 2. HDMI IN 3. VGA(D-SUB) IN 4. VIDEO1(AV1) IN 5. VIDEO1(AV1) OUT 6. VIDEO2(AV2) IN 7. VIDEO2(AV2) OUT 8, 9. AUDIO IN(R +L) for AV1, A V2 10. PC STEREO IN 11. TRIGGER INPUT 6 …………………………………………………………………….
B. REMOTE CONTROLLER (Option) 1. POWER( ) Turn the power ON or OFF. There will be a few se conds delay before the di splay appears. 2. SOURCE Select pc or video(AV1/AV2/HDMI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. HOLD Stop the Trigger & Auto switching functions.
C. FRONT KEY CONTROL 1. SOURCE/ Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display . This button can also be used to move previous menu or status. 3, 4. AUTO/ ▼ , ▲ These buttons allow user to move t he sub-menu of the activated function.
OSD MENU DESCRIPTION A: Custom Menu (Only Video Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) or right( ▶ ) button to adjust the picture setting.
A: Custom Menu (For RGB-PC & HDMI Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) or right( ▶ ) button to adjust the picture setting.
B. Picture / Sound Menu (Only Video Input) 1. Picture Mode 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / Sound. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode.
2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone. 2) Press the right( ▶) or SOURCE/ button. 3) Press the right( ▶) or SOURCE/ button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option.
2-2. Color Tone (User) 1) Press the up( ▲ ) or down( ▼ ) button to select the User. 2) Press the MENU button. 3) Press the up( ▲ ) or down( ▼ ) button to select the User option. 4) Press the left(◀) or right( ▶ ) button to adjust the Red, Green or Blue setting.
3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 14 …………………………………………………………………….
4. Volume 1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button to adjust Volume setting. 3) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 16 …………………………………………………………………….
6. NR (Noise Reduction) 1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
7. 3D Comb 1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 18 …………………………………………………………………….
B. Picture / Sound Menu (For RGB-PC & HDMI Input) 1. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. INSTRUCTION MANUAL …………………………………………………………………….
2. PC (Only RGB-PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the PC sub menu. 4) Press the right( ▶ ) or SOURCE/ button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting.
C. PIP Menu 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the PIP. 1. PIP 1) Press the right( ▶ ) or SOURCE/ button. 2) Press up( ▲ ) or down( ▼ ) button to select the On or Off. 3) Press the MENU button to save.
2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Source option.
3. PIP Mode 1) Press the up( ▲ ) or down( ▼ ) button to select the PIP Mode. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the PIP Mode option.
4. PIP Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 24 …………………………………………………………………….
5. Position 1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. ※ RB: Right of Bottom, LB: Left of Bottom, LT: Left of Top & RT: Right of Top.
6. Swap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/ button to swap the main image for the sub one.
7. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select option. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
D. Setup Menu 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Setup. 1. Reset 1) Press the right( ▶ ) or SOURCE/ button 2) Press the right( ▶ ) or SOURCE/ button again. 3) Press SOURCE/ button to execute the reset.
2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the right( ▶ ) or SOURCE/ button 3) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone option. 4) Press the MENU button to save. 30 …………………………………………………………………….
4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock. 2) Press the right( ▶ ) or SOURCE/ button 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off 4) Press the MENU button to save. 32 …………………………………………………………………….
6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right( ▶ ) or SOURCE/ button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right( ▶ ) or SOURCE/ button.
6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu button to save.
6-3. Buzzer 1) Press the up( ▲ ) or down( ▼ ) button to select the Buzzer. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the Menu button to save. INSTRUCTION MANUAL …………………………………………………………………….
6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left( ) ◀ or right( ▶ ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 36 …………………………………………………………………….
6-5 Trigger Option 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Option. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Option setting. 4) Press the Menu button to save.
6-6. Display Type 1) Press the up( ▲ ) or down( ▼ ) button to select the Display Type. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Display Type option. 4) Press the Menu button to save. ※ PIP & FULL: When the condition is below, the Trigger Input image will be displayed a s PIP.
7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switching. 2) Press the right( ▶ ) or SOURCE/ button. 7-1. Auto switching On/Off 1) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off .
7-2. Auto switching Input enabled 1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right( ▶ ) or SOURCE/ button.
7-3. Auto switching Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left( ) ◀ or right( ▶ ) button to adjust the Time setting. 3) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
Using the VESA standard wa ll mount design and the 100 × 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation(Option) 1.
▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORIES 1. Power cord 2.
POWER CONSUMPTION MODE POWER CONSUMPTION 17” 19” ON < 40W < 45W POWER OFF < 1W LED INDICATOR The power management featur e of the monitor is co mprised of four stages: ON(GREEN) and POWER OFF(GREEN OFF).
17’’ 19’’ LCD-Type 17 ˝ Diagonal AM-TFT(Acti ve-Matrix) 19 ˝ Diagonal AM-TFT(Activ e-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.
WEEE Symbols 46 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of This Product (Waste Electrical & El ectronic Equipment) (Appl.
MEMO.
MEMO.
.
P/N : L39ME0196 Rev.4.
An important point after buying a device Orion 17RTVN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Orion 17RTVN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Orion 17RTVN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Orion 17RTVN you will learn all the available features of the product, as well as information on its operation. The information that you get Orion 17RTVN will certainly help you make a decision on the purchase.
If you already are a holder of Orion 17RTVN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Orion 17RTVN.
However, one of the most important roles played by the user manual is to help in solving problems with Orion 17RTVN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Orion 17RTVN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
