Instruction/ maintenance manual of the product TP170WP Oricom
Go to page of 24
.
2 1 General Information W arnings It is very important that you read the User Guide carefully as it contains detailed information on installation, programming and operational issues which you will need to be a ware of to ensure the Care Phone oper ates proper ly .
3 • The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items. • Setting the receiver v olume to maximum ma y , under some situations cause ear damage. We suggest returning the handset v olume control to the “0” position after each call.
4 2 Location of controls 1. T elephone Line J ack 2. Hook switch 3. Handset Holder 4. Delete Button 5. Call Back Button 6. Memory Buttons (M1, M2) 7. Speaker 8. Ke ypad 9. Receiver volume control 10 . Receiver volume LED 11. Powe r Ja ck 12 . New Call LED 13 .
5 3 Installation 3. 1 Installing batteries (supplied) in the phone W arnings Y ou must install 4 AA Alkaline batteries in the phone base. The battery back up system will then be able to power the unit for up to 12 hours if there is a mains power failure.
6 3. 4 W all Moun ting Method A. T o fit to an existing telephone wall plate with modular connector simply , 1. Press and lift out the handset holder on base. Rotate it 180°, and snap it into place (see A) so it will hold the handset in place when the phone is mounted on the wall.
7 4 Setting Up 4. 1 Setting the contrast 1. Press the MENU button. The display shows “ LCD CONTRAST ” . 2. Press the OK b utton. The display shows the current contrast setting with values between 1 and 5. 3. Press or to select the contrast level and confirm with OK button.
8 4. 5 Receiver V olume Control The receiver volume control enables you to adjust the receiver volume on the handset. Rotate the button on the base to select a comf or tab le listening level (1-9), the red LED will turn on. WARNING Setting the receiver v olume to maximum ma y , under some situations cause ear damage.
9 5.1 Pairing new pendants to the phone 1 . Press and release the MENU button until REMO TE PENDANT is sho wn. 2 . Press the OK button, 3 . Select P AIRING or DELETE by pressing the or , and confirm with the OK button. 5.2 Remote Pendant setting: If you select P ARING , the displa y will show P AIRING f or only 3 seconds.
10 Pre Dialing a Call 1. Dial the number you wish to call the telephone will speak out the numbers as you dial them (with v oice option ON). T o correct a number press the DELETE button for each incorrect digit. 2. Pick up the handset, press CALL B A CK or press the SPEAKER button.
11 6. 5 Call waiting (Recall button) Y ou can use the recall function to answer a second call while y ou are on the phone. However this service will need to be turned on. For example to turn on T e lstr a’ s Call W aiting ser vice: 1. Lift the handset or press SPEAKER button.
12 T o dial the numbers in the emergency MEMOR Y Buttons, simply pic k up the handset or press SPEAKER button and press M1 or M2 . Note: the numbers stored in M1 and M2 memory buttons are for manual dialing only and are not dialled in the emergency call function.
13 W ARNING Selecting the correct location is very important as this feature determines the sequence in which the emergency telephone numbers are dialled. Location 1 will be dialled first, then 2, then 3 etc. W ARNING: If you choose to o verwrite a location, the pre viously stored number will be erased.
14 7. 2 T o revie w the Phone Book Memory 1. Press and release CID button until the phone symbol is shown. 2. Review the stored phone number by pressing or , or enter the first letter of the name of the person you wish to call. After a shor t time, the display will display the first stored telephone number and say the name if it was recorded.
15 7. 5 T o Edit Phone Book Memories 1. Press and release CID button until phone book symbol is shown. 2. Select the required location by pressing or . 3. Press and hold MENU button f or two seconds. The displa y will show EDIT? . 4. Press OK button, the first digit of the selected phone number will flash.
16 8 Emergency Call feature THE EMERGENCY CALL FUNCTION WILL NO T OPERA TE UNLESS ALL THE PROCEDURES IN THE USER GUIDE HA VE BEEN COMPLIED WITH. This feature allows you to summon assistance from the people in emergency phone list. 8. 1 Emergency Message T wo options are provided f or your emergency message: A .
17 8. 5 T o activate the Emer gency Call function: 1 . Press and hold the button on the pendant or the SOS emergency button on the telephone f or three seconds.
18 9 . Caller ID Important: T o use Caller ID functions the CLIP symbol must be on. If the CLIP symbol is not visible on the displa y , press the CID button once. 9. 1 Receiving a Call (Can be stored up to 64 calls) • If an incorrect, invalid or incomplete Caller ID signal is received, the display shows -ERROR- .
19 9. 3 Deleting Numbers from the Caller ID Memory 1. Select the required Caller ID memory location by using the or button. 2. T o delete single memor y , press DELETE button once. The display will show the DELETE? . Press DELETE b utton for 2 seconds.
20 1 0 . Important Information 10.1Pe rio dic tes tin g Remote Pendant We recommend you check and test the remote pendant and SOS button function e very month.
21 10.3 Consumer Support and T roubleshooting If you feel this product is not working correctly please consult this user guide and ensure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket.
22 (ii) negligence on your part or misuse by you of the product; (iii) any un-controlled external cause to the phone not functioning including but not limited to electricity failure, lighting, over vo.
.
2LMC70YY.
An important point after buying a device Oricom TP170WP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oricom TP170WP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oricom TP170WP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oricom TP170WP you will learn all the available features of the product, as well as information on its operation. The information that you get Oricom TP170WP will certainly help you make a decision on the purchase.
If you already are a holder of Oricom TP170WP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oricom TP170WP.
However, one of the most important roles played by the user manual is to help in solving problems with Oricom TP170WP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oricom TP170WP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
