Instruction/ maintenance manual of the product C1000 1.8 GHz Oricom
Go to page of 21
Owner’s Manual Oricom C1000 1.8 GHz DECT Wireless Conference Phone 2 TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION ............. .............. ............. .............. ......... 4 GETTING STARTED ............. .............. .............. ...
3 Programming... .............. .............. ................. ............. .............. .............. 29 Start Programming ..... .............. .............. ................. ............. .... 29 Ringer Melody ......... ................. ...
5 • Do not use your telephone during an electr ical stor m thunderstorm as it is possible to get an electric shock. Refer to information contained in Telstr a White pages directory. • Do not use this product to report a gas leak in the vicinity of the leak.
7 GETTING STARTED Contents Of Pack This package should contain the following: Base POD Base Adaptor Charging Adaptor for POD Battery Telephone Line cord and plug User’s Guide If any of these items are missing, pleas e contact the dealer were you purchased this product.
9 Base Page button Press to page POD if you want to find the misplaced POD. In Use LED Flashes during incoming call and steadily lit when the phone is in use.
11 Phone Key Key Function Key Phone Book Service Recall Recall Redial / Prog r am Clear / Number Up Down Phone On/Off Mute Ringer On/Off Dial Tone Pause 12 Basic Steps For Installation 1.
13 BASIC OPERATIONS Standby • When the phone is not in use, the POWER LED on the base is turned on and the LCD on the POD displays your phone number, if programmed. Answering Calls When there is an incoming call, the GREEN LEDs on the base and the POD blink and the icon flashes on the display.
15 Making Calls Predialing The phone number is entered before the phone line is seized. The phone number can be verified before you place the call. • Enter the phone number. Digits are displayed. • Press CLEAR key to clear previous digit during number entry.
17 Redialing • Call timer and talk time remaining counter are displayed accordingly. • Press PHONE key again to end the c all. Note: If the last dialed number has more than 18 digits, only the last 18 digits shall be displayed. The Scroll icon shall turn on.
19 Phonebook Dialing Note: If no phonebook record is selected after PHONEBOOK key has been pressed, i. Press CLEAR key to exit phonebook selection and to return to the call and talk timers. ii. Pressing “ * “ , “#”, PHONEBOOK , and SERV ICE keys will have no effect.
21 Services Dialing Services’ dialing allows you to call network service (e.g. confer ence services) by a single key press. Refer to the programming section for how to enter or edit the services phone number. • Press SERVICE key in Standby to seize the line.
23 Things you can do during a call You can do the following during a call, a. Adjust speaker volume; b. Mute call; c. Change dial tone; d. Send Recall signal; e. Dial extra digits; f. Dial from phonebook record; g. Display user phone number. Adjust Speaker Volume 16 different levels of speaker volume can be selected.
25 Things you can do during a call Dialing from Phonebook Record You can dial any phonebook number when you are talking on the phone. Phone book dialing can be used as many times as you like during a call. • Press PHONEBOOK ke y . (The phonebook icon tur ns on.
27 Ringer Volume The POD has six ringer volume levels for selection (includ ing OFF). The ringer volume can be adjusted or turned on/off when the phone is ringing or during Standby. Adjusting Ringer Volume OR • Press UP/DOW N keys to adjust the ringer v olume.
29 Programming You can program the ringer melody, dialing mode, Recall duration, user phone number, network service number , and service centre number. You can also reset all settings back to the factory defaults. Start Programming • Press and hold PROGRAM key during Standby.
31 Programming Recall Duration • Press and hold P ROGRAM key during Standby. • Press “3” to select recall duration programming. (The default setting 100ms duration is displayed.) • Press PROGRAM key to select Recall duration programming. (The current selection flashes.
33 Programming Network Services Number • Press and hold PROGRAM key during Standby. • Press “5” to sel ect n etwo rk services number p rogramming. (The LCD display s the current number if available; otherwise a blank screen will be displayed.) • Press PROGRAM key to select service number programming.
35 Programming Returning to factory Default Setting • Press and hold PROGRAM key during Standby. • Press and hold “9” to retu rn the phone to the factory default settings. (The display will show “888888888888888888”.) • Press PROGRAM key to confirm the s elect ion.
37 Additional Features Low Battery • During standby, the battery icon will become empty and starts flashing when the battery is low . • During phone mode, the LED’s on the POD flashes RED quickly every minute and the empty battery icon flashes when the battery is low.
39 QUICK REFERENCE GUIDE Program Network Services Number • Press and hold → Press 5 → → Press to erase digit or enter new number → Press Program Servic e Centre Number • Press and hold →.
41 WALL – MOUNTING If you wish to wall-mount your base, follow the steps below. Be careful that your base is not too far away from power socket and you do not drill through any electrical wiring or cables. Step 1: Drill three holes using the template provided in the next page.
An important point after buying a device Oricom C1000 1.8 GHz (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oricom C1000 1.8 GHz yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oricom C1000 1.8 GHz - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oricom C1000 1.8 GHz you will learn all the available features of the product, as well as information on its operation. The information that you get Oricom C1000 1.8 GHz will certainly help you make a decision on the purchase.
If you already are a holder of Oricom C1000 1.8 GHz, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oricom C1000 1.8 GHz.
However, one of the most important roles played by the user manual is to help in solving problems with Oricom C1000 1.8 GHz. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oricom C1000 1.8 GHz along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
