Instruction/ maintenance manual of the product BB200 Oricom
Go to page of 16
Oricom BB2 00 DECT C ordless Telephone User Guide Keep this user guide for future reference.
- 2 - CONTENTS Getting Started … ………………………………………………………………………. 3 Handset and base unit………… ……………………………………………………… 3 Handset Display Guide ……………………………………………………………….
- 3 - GETTING STARTED Unpacking your Oricom BB200 Retain all packing materials in a safe place, in case you later need to transport it or return it for servicing.
- 4 - HANDSET DISPLAY GUIDE Legend & Memory/Store (to store a number in memory or to make a call to a stored number) Battery level Battery level (Battery low) % Handset Ringer “O N” % Han dset Ringer “OFF” X Speakerphone “ON” Keypad locke d On steady: telephone line is busy .
- 5 - SA FETY INFORMATION • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors.
- 6 - INSTALLATION POWER SUPPLY IMPORTANT! The mains power adaptor must be installed near the equipment and must be easily accessible . P ower must be turned on at all times for the phone to work 1. Connect the output plug of the mains adaptor to the adaptor socket on the back of the base unit and the mains adaptor to the wall mains supply.
- 7 - BASIC OPERATION Introduction When the phone is in standby mode, the LCD displays the handset name. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base.
- 8 - PRE - DAIL L ING Pre - dial allows you to enter a telephone number and verify it on the screen before you place the ca ll. The screen displays the last 12 digits d ial led but you can enter up to 2 digits. • In standby mode enter the phone number you wish to dial .
- 9 - HANDSET RINGER VOLUME • While the handset is in the standby mode press the volume button. • Press the to decrease the volume level and to increase the volume level . The display shows the current volume level: the less “0 ’s ” is the lowest level and more “00000” is the highest level.
- 10 - TURNING OFF THE HANDSET RINGER • When the handset is in the standby mode pr ess and hold for a few seconds the * button, the symbol % will appear on the display. • To turn the ringer back on, press and hold again the button * , the symbol % wil l disappear from the display.
- 11 - PHONEBOOK MEMOR IES AND CALLER ID MEMORIES You c an store up to 10 numbers in the phonebook memory. Each stored number can be up to 25 digits. TO STORE A NUMBER IN THE PHONEBOOK Make sure the handset is in the standby mode . Press the button and hold it until the symbol & flashes on the display.
- 12 - CALLER ID If you subscribe to your network providers Caller ID service (charges may apply) your phone automatically stores the numbers of the last 20 incoming calls. When the phone rings and caller information is received, the display will show the last 14 digits of the callers number.
- 13 - TO RETURN A CALL • In standby mode, press the Phone button to enter the list. • Use the and buttons to select the number you want to call back. - To call back a number when the call details (date a nd time or telephone number) are displayed, just press three or the X button.
- 14 - TROUBLESHOOTING TROUBLESHOOTING Are you having trouble with your phone? Here are some answers to common questi ons. Problems Solutions The phone does not work at all • Make sure that adaptor and phone cord are connected properly. • Check that the batteries are fully charged and installed properly.
- 15 - N otes for operation i n New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, no r does it provide any sort of warranty.
- 16 - WARRANTY This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, water ingress, excessive voltag e, telephone line faults or lightning. This guarantee in no way affects your statutory rights.
An important point after buying a device Oricom BB200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oricom BB200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oricom BB200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oricom BB200 you will learn all the available features of the product, as well as information on its operation. The information that you get Oricom BB200 will certainly help you make a decision on the purchase.
If you already are a holder of Oricom BB200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oricom BB200.
However, one of the most important roles played by the user manual is to help in solving problems with Oricom BB200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oricom BB200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
