Instruction/ maintenance manual of the product TP380 Oregon Scientific
Go to page of 20
1 Model: TP380 User Manual Manuale d’uso Manuel d’utilisation Bedienungsanleitung Manual de uso Manual do usuário Gebruikshandleiding Bruksanvisning.
2 INTRODUCTION Thank you for selecting the Oregon Scientific™ TP380 as your product of choice. This product is a portable, easy-to-use two-way radio transceiver that you can use to contact your fami.
3 KEY FEA TURES FRONT VIEW NO. DESCRIPTION FUNCTION 1 Antenna Flexible, bendable antenna receives and transmits signals, reduces chance of breakage and fits more easily and comfortably into shirt or pants pocket 2 LCD Display screen 3 PTT 1 . Push to talk 2 .
4 7 MENU 1 . Scroll through menu options 2 . Press and hold MENU to enable monitoring function 8 1. Increase Volume 2 . Select Channel, CTCSS in MENU mode 1 . Decrease V olume 2 . Select Channel, CTCSS in MENU mode 9 Speaker Receives voices / sounds from incoming call BACK VIEW NO.
5 SYMBOL FUNCTION Receiving Transmitting V olume V oice Activation System Key Lock Auto Power Off Key Beeps Roger Beeps Scan Channel or CTCSS Battery Indicator Silent Alert function quietly alerts you.
6 SAFETY AND CARE INSTRUCTIONS SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. * LCD panel – The LCD panel is made of glass, and may break if the unit is dropped or impacted.
7 OPERA TING THE TRANSCEIVER 1 . T o access the battery compartment, slide the hook at the back of the transceiver in an upward motion and remove. 2 . Slide the back cover of the transceiver in a downward motion to remove. 3 . Insert 3 AAA batteries into the battery compartment, noting polarities.
8 5 . Press and hold to turn on the device. The unit will beep with the LCD displaying all symbols for 1 second. 6 . Use or to increase or decrease volume, respectively . The VOL number will show on the LCD accordingly . 7 . T o turn the device off, press and hold until the unit beeps and the LCD goes blank.
9 NOTE : 1. Use 3 AAA alkaline or rechargeable batteries when operating this unit. Before charging, study the user manual section on “Charging Contacts” for further instructions. 2. Reset: At any time if the unit can’t work properly , please take off the batteries and insert them again.
10 AUTO-SQUELCH FUNCTION Y our transceiver has an Auto-Squelch function for hearing weaker, distant transmissions. Y ou will not hear anything on a channel unless someone is transmitting nearby on the same channel. 1 . Press and hold MENU for 2 seconds to enable/disable this function.
11 Roger Beep Enable/disable beep heard after the finish of a received transmission Key T one Enable/disable beep when a key on the transceiver is pressed Vibrating Enable/disable vibration function Automatic Enable/disable automatic shut-off after Power-Off device is idle for 2 hours NOTE: Press MENU to confirm and move to the next setting.
12 2 . Press and hold or to begin scanning a CTCSS channel. If a valid signal is present, the transceiver will pause on the current active channel. 3 . Press PTT to set and store the CTCSS channel, or the transceiver stores the display setting after 15 seconds.
13 2 Normal sensitivity – ideal setting for voice- activated transmission 3 High sensitivity – all detected soun(including noise) are transmitted b 1 Low sensitivity – only audibly loud baby voi.
14 1 . Press MENU 5 consecutive times until appears on the LCD. 2 . Press or to activate/deactivate the Key T one function. SILENT ALERT Enabling the Silent Alert function allows you to be aware of any incoming calls without needing to turn on any beeping sounds.
15 1 . Press MENU 7 consecutive times until appears on the LCD. 2 . Press or key to activate/deactivate the function. NOTE : Press any button to re-enable the transceiver after automatic shut-off.
16 CAUTION: 1 . Located inside the transceiver’s battery compartment is a charging switch, which must be set to “ON” while charging. If alkaline batteries are used, switch the set to “OFF”. T o avoid risk of fire or inquiry , do no switch to ON when using alkaline batteries.
17 CTCSS PRIV ACY CODES CHANNEL FREQUENCY CHANNEL FREQUENCY (IN HZ) (IN HZ) 0 1 67.0 2 0 131.8 0 2 71.9 2 1 136.5 0 3 74.4 2 2 141.3 0 4 77.0 2 3 146.2 0 5 79.7 2 4 151.4 0 6 82.5 2 5 156.7 0 7 85.4 2 6 162.2 0 8 88.5 2 7 167.9 0 9 91.5 2 8 173.8 1 0 94.
18 SPECIFICA TIONS RX Frequency 446.00625 – 446.09375 MHz Channels 8 Modulation type FM Antenna impedance 50 Ohm Microphone condenser type Power supply 3 × AAA Alkaline Sensitivity at 12dB Sinad 0.5 µ µ µ µ µ V Adjacent Channel Rejection 55dB Audio Squelch Auto Audio output power 100mW @ 8 Ohm Audio Distortion 7% RF Output Power 500 mW @ 4.
19 EN-DECLARTION OF CONFORMITY Hereby , Oregon Scientific declares that this PMR446 model TP380 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on requested via our Oregon Scientific Customer Service.
20.
An important point after buying a device Oregon Scientific TP380 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific TP380 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific TP380 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific TP380 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific TP380 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific TP380, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific TP380.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific TP380. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific TP380 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
