Instruction/ maintenance manual of the product Scientific Cable Free Weather Station BAR928 Oregon Scientific
Go to page of 9
Cable Free W eather Station Model: BAR928 User Manual BAR928-E Cover R1 OP 8/21/04, 11:55 PM 1 Black.
EN 1 CABLE FREE WEATHER STATION MODEL: BAR928 USER’S MANUAL INTRODUCTION Congratulations on purchasing the BAR928 Top Weather Station. The BAR928 is an all-in-one clock and weather device.
EN 2 H PRESSURE UNIT SLIDE SWITCH Selects between mb/hPa and inHg display S MOON PHASE SCANNER Displays the current moon phase or that of the date checked T THERMO BUTTON Sets the unit in indoor or ou.
EN 3 BATTERY INSTALLATION: MAIN UNIT 1. Gently press and lift the tab on the battery compartment door. 2. Insert four UM3 or AA-size batteries. 3. Replace the battery compartment door. Replace the batteries when the BATT indicator on the weather forecast window lights up.
EN 4 Arrow indicator Temperature Trend Steady Falling Rising Forecast Sunny Slightly Cloudy Cloudy Rainy Indicator displays on the unit NOTE ON OUTDOOR-REMOTE TEMPERATURE Once batteries are in place for the remote unit, it will start transmit- ting samplings at 30-second intervals.
EN 5 NOTE: 1. The accuracy of a general pressure-based weather forecast is about 70 to 75%, and therefore, cannot be held responsible for any inconveniences so caused by an inaccurate forecast. 2. The weather forecast is meant for the next 12 to 24 hours.
EN 6 Temperature resolution : 0.1 ° C (0.2 ° F) Remote Temperature measurement Displayed OUT temperature range : -50.0 ° C to +70.0 ° C (-58.0 ° F to 158.0 ° F) Proposed operating range : -5.0 ° C to +50.0 ° C (23.0 ° F to 122.0 ° F) Temperature resolution : 0.
EN 7 CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitations, the displays shown in this manual may differ from the actual display.
© 2004 Oregon Scientific. All Rights Reserved. 086-001853-226 BAR928-E Back R1 OP 8/21/04, 11:55 PM 1 Black.
An important point after buying a device Oregon Scientific Scientific Cable Free Weather Station BAR928 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific Scientific Cable Free Weather Station BAR928 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific Scientific Cable Free Weather Station BAR928 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific Scientific Cable Free Weather Station BAR928 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific Scientific Cable Free Weather Station BAR928 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific Scientific Cable Free Weather Station BAR928, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific Scientific Cable Free Weather Station BAR928.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific Scientific Cable Free Weather Station BAR928. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific Scientific Cable Free Weather Station BAR928 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
