Instruction/ maintenance manual of the product RX109 Oregon Scientific
Go to page of 30
1 GB Oregon Scientific™ OUTBREAKER Sports Watch (RX109 series) User Manual TABLE OF CONTENTS Introduction ...................................................................... 2 Key features .........................................................
GB 2 BIKE Mode (RP109 only) ................................................. 20 Set up for BIKE Mode .................................................... 20 Step 1: Attach the equipment to the bicycle .................. 20 Step2: Enter wheel circumference .
3 GB OUTBREAKER WATCH I I ITEM NAME DESCRIPTION 1 SELECT/+/> Press to increase value, change Mode display, or record a marker during TOUR Mode. 2 MODE Press to switch between Modes. 3 ST/SP/- Press to start/pause/stop the Stopwatch/Timer or decrease value.
GB 4 LCD DISPLAY SYMBOLS SYMBOL DESCRIPTION The current time. YR Year setting. MTH Month setting. DAY Day setting. MON Current day of the week. (MON..SUN) TRIP TOUR Mode is running time/date cannot be set HR Hour setting. MIN Minute setting. DM/MD Order for date to be displayed.
5 GB Zone The current time set in your second time zone. AL Shows alarm time, or event alarms (max/min altitude/heart rate etc) Shows max/min altitude alarm is deactivated. Shows if alarm is on or off. Weather forecast for the next 12-24 hours. (Sunny/Slightly Cloudy/Cloudy/Rainy) STW Stopwatch can be started/stopped/reset.
GB 6 HOW THE OUTBREAKER WORKS The OUTBREAKER sports watch comes equipped with a barometer (measuring altitude, barometric pressure, and weather conditions), a weather forecast display, a thermom- eter, a heart rate monitor (RS109/RP 109 only), and a bicycle computer to display information when cycling (RP109 only).
7 GB To load new batteries in the chest belt (RS109 and RP109 only) and bike mount: The chest belt will stop sending signals if its battery is low. Bad transmission from the chest belt may also be the result of poor contact with the skin, surrounding interference, or placing the receiver watch too far away.
GB 8 The watch will show Cxxx, Rxxx or Sxxx whenever either the bike mount, cadence or speed sensor batteries are low. Replace all the batteries at the same time – it is dangerous to mix old and new batteries. Used batteries can be harmful to the environment, and should not be thrown out with household rubbish.
9 GB CLOCK MODE The time, date (including the day of the week) and time alarm can be set while the watch is in CLOCK Mode. Follow the instructions below to set or activate the time, date, zone time, metric or imperial standards, alarm time, stopwatch and timer.
GB 10 TIMER The Timer works in CLOCK, ALTI-BARO, CARDIO, and BIKE modes. From any of these Modes, press SELECT/+ to display the stopwatch. Press FUNC/SET to reset the Stopwatch, then: • Press and hold FUNC/SET for 2 sec- onds. The display will change to TMR.
11 GB SET CURRENT ALTITUDE AND RESOLUTION When you first use the watch, it is important to set the current altitude and local sea-level pressure so your ascending and descending altitude can be accurately measured. You can find the current altitude by comparing your position to a topographical map , and then entering the value in the watch.
GB 12 SET THE SEA-LEVEL PRESSURE Sea level pressure can change relative to location. To achieve accurate altitude readings, set the sea-level pressure value before every trip. Check the newspaper, local news station, trail marker, or weather forecast for local readings, and always select the reading nearest to your present location.
13 GB RECALLING ALTITUDE DATA The OUTBREAKER allows you to track the following informa- tion as you exercise. • Max / min altitude attained -- shows the highest or lowest point you have reached so far in relation to your watch’s permanent altitude setting.
GB 14 speed of barometric change and in some cases may take longer (up to 24hrs) than desired. • Setting the icon can speed up the adjustment for the weather forecast. • It is necessary to set the icon after exposure to artificial environments, such as an airplane cabin, which may cause incorrect readings.
15 GB The watch can record and store up to 99 different trips, providing there is enough remaining memory. Default sampling time for readings in TOUR Mode is every 5 seconds. To increase the gap between samplings, and thus increase the memory capacity, you can adjust this setting through the PC software.
GB 16 2. Press and hold FUNC/SET for two seconds. This ENDS the TOUR recording session. 3. Press MODE to return to the CLOCK display. CLEAR ALL TOUR MEMORIES For best results, perform these steps after you download TOUR information to the PC software.
17 GB WEARING THE CHEST BELT You must wear the chest belt to measure your heart rate. This OUTBREAKER watch is specially designed to work with the chest belt with which it was sold. It is not recommended you use any other chest belt with this watch, as the transmission may not work.
GB 18 The calculation for determining your upper and lower heart rate limits is as follows. Once you know your maximum heart range, you can set the 5 Training Zones (described below) with the PC software (refer to the online help).
19 GB 6. Press SELECT/+ or ST/SP/- to change the upper heart rate limit. 7. Repeat Steps 5 – 6 to set the lower heart rate limit. 8. Press FUNC/SET when finished.
GB 20 tions. STEP 1: ATTACH THE EQUIPMENT TO THE BICYCLE BIKE MODE (RP109 ONLY) The OUTBREAKER sports watch comes complete with a bicycle computer (and accessories), which records and dis- plays the f.
21 GB To attach the equipment: 1. Attach the bike mount to the right or left handlebar using rubber grip, nut and bolt provided. Tighten until the bike mount is fixed into place, using the rubber grip for a firmer contact. 2. Attach the cadence sensor to a stationary point just behind the pedal, using the rubber grip for a firmer contact.
GB 22 PC KIT (RP109 ONLY) The RP109 Oregon Scientific OUTBREAKER sports watch is equipped with a PC Kit that includes a PC Docking Station and CD-ROM for downloading information to a personal computer. Full instructions for using the software are provided in the online help and can be viewed once you have installed the CD-ROM.
23 GB PC MODE SET UP FOR PC MODE To use the features of the PC Mode, you will need the PC Kit (includes PC docking station, connector cable, and the instal- lation software CD-ROM), and a PC or laptop computer. All three models (RA/RP/RS 109) support the PC Mode.
GB 24 To send all selected settings and preferences to the watch select “Transfer configuration” in the “communication” sub-menu (PC software). DOWNLOAD DATA Follow these procedures to download data 1. After installing the CD-ROM click the OUTBREAKER icon on your PC.
25 GB RAIN SPLASHES, ETC OK OK OK SHOWERING (WARM / COOL WATER ONLY) OK OK OK LIGHT SWIMMING / SHALLOW WATER NO OK OK SHALLOW DIVING / SURFING / WATER SPORT NO NO OK SNORKELING / DEEP WATER DIVING NO .
GB 26 • Cleaning – Clean with a damp cloth. Do not use liquid cleaning agents, benzene, thinner, or aerosols. • Repair – Do not attempt to repair the product or modify the circuitry by yourself. Contact the retailer or a qualified repairman if the product requires servicing.
27 GB SPECIFICATIONS Calendar Clock Hour format 12/24 hr Date format DD:MM:YY or MM:DD:YY Auto calendar 2000-2099 Alarms 1 daily (hr:min) 3 event (hr:min DD.
GB 28 Vertical speed resolution 1 m/sec (3 ft/sec) Max altitude change 1 m/sec (3 ft/sec) Total altitude change +/- 60,000 m (+/- 180,000 ft) Alerts 1 alarm Barometer Local pressure range 300…1100 hPa (8.86…32.46 inHg) Sea level pressure range 900…1100 hPa (26.
29 GB • Do not subject the product to impact or shock. • Check all major functions when the device is unused for a long period of time. This is to ensure its full operation. Maintain a regular internal testing and cleaning of your device. • When disposing of this product, do so in accordance with your local waste disposal regulations.
GB 30 EMC Directive 89/336/EEC and carries the CE 0359 (!) marking accordingly. Hereby, IDT Technology Limited declares that this low power radio equipment is in compliance with the essential require- ments and other relevant provisions of R&TTE Directive 1999/ 5/EC.
An important point after buying a device Oregon Scientific RX109 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific RX109 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific RX109 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific RX109 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific RX109 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific RX109, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific RX109.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific RX109. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific RX109 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
